Resumen del contenido incluido en la página 1
WET SHARPENER
MODEL H6069
INSTRUCTION MANUAL
COPYRIGHT © APRIL, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#6234 PRINTED IN CHINA
Resumen del contenido incluido en la página 2
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lum ber. Your risk from these exposures varies, depending on how often you do this
Resumen del contenido incluido en la página 3
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indic
Resumen del contenido incluido en la página 4
Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD 13. DON’T OVERREACH. Keep for the tool. Make sure your exten- proper footing and balance at all sion cord is in good condition. Con- times. ductor size should be in accordance 14. MAINTAIN TOOLS WITH CARE. with the chart below. The amperage Keep tools sharp and clean for rating should be listed on the motor best and safest performance. Fol- or tool nameplate. An undersized low instructions for lubricating and cord will ca
Resumen del contenido incluido en la página 5
Additional Safety Instructions For Wet Sharpeners 1. READ THIS MANUAL. This man- 6. PERFORM machine inspections ual contains proper operating and maintenance service promptly instructions for this machine. as required. 2. DO NOT jam the workpiece against 7. NEVER leave the machine running the sharpening surface. Firmly unattended. grasp the workpiece in both hands 8. REPLACE sharpening wheel as and ease it against the sharpener needed. using light pressure. 9. NEVER sharpen more than one
Resumen del contenido incluido en la página 6
INTRODUCTION Foreword Contact Info We are proud to offer the Grizzly Model If you have any comments regarding this H6069 Wet Sharpener. This model is part manual, please write to us at the following of a growing Grizzly family of fine power address: tools. When used according to the guide- lines set forth in this manual, you can Grizzly Industrial, Inc. expect years of trouble-free, enjoyable C/O Technical Documentation operation and proof of Grizzly’s commit- P.O. Box 2069 ment to customer
Resumen del contenido incluido en la página 7
FEATURES & CONTROLS The set up and operation instructions will be easier to understand if you are familiar with the basic features of the Model H6069 Wet Sharpener. Match up the feature list below with the letters in Figure 1 to identify the wet sander feature locations. A C B D E Figure 1. Model H6069 features and controls. A. Tool rest B. Drain trough C. Power cord D. Adjustment lock handles E. Forward/Off/Reverse switch Model H6069 Wet Sharpener -5 -5- -
Resumen del contenido incluido en la página 8
OPERATIONS Filling Reservoir To fill the water reservoir: 1. DISCONNECT FROM THE POWER SOURCE. 2. Loosen the tool rest adjustment lock handles and move the tool rest away from the sharpening stone. 3. Fill the water reservoir. See Figure 2 Fill Here Reduce the risk of electrocution by keeping all connections dry and off the ground. DO NOT touch plugs with wet hands. Failure to follow these warning could result in seri- ous injury. Figure 2. Tool rest moved away from sharpening wheel. 4.
Resumen del contenido incluido en la página 9
Tool Rest Sharpening The Model H6069 Wet Sharpener, if prop- Equipped with an adjustable tool rest, the erly used, will help you maintain the qual- Model H6069 enables precise control over ity and life of your tools by keeping them the sharpening operation. Figure 3 shows sharp. Typical items you may sharpen with the height and angle adjustment lock han- the wet sharpener include knives, chisels, dles for the tool rest. planer blades, lathe tools and any other items around your shop that
Resumen del contenido incluido en la página 10
MAINTENANCE Reservoir Rinsing With use, the water reservoir will begin to fill with ground material from the objects being sharpened and wheel particles removed during the sharpening process. Keep the water reservoir clean and free of residue build up. To rinse the water reservoir: Reduce the risk of electrocution by keeping all connections dry and off 1. UNPLUG THE SHARPENER FROM the ground. DO NOT touch plugs THE POWER SOURCE. with wet hands. Failure to follow these warning could re
Resumen del contenido incluido en la página 11
NOTES Model H6069 Wet Sharpener -9-
Resumen del contenido incluido en la página 12
H6069 Wet Sharpener Parts Breakdown 3 37 11 2 12 9 10 16 4 1 13 17 8 49 19 14 48 5 17 18 6 20 42 47 7 41 15 25 43 39 40 12 21 22 24 35 23 38 36 26 12 34 27 28 32 31 45 44 29 24 30 33 REF PART # DESCRIPTION 1 PH6069001 UPPER HOUSING 2 PCB14 CARRIAGE BOLT #10-32 X 3/8" 3 PH6069003 LEFT SUPPORT 4 PH6069004 RIGHT SUPPORT 5 PH6069005 PLASTIC WASHER 3/16" 6 PH6069006 LOCK HANDLE NUT 3/16-32 7 PH6069007 LOCK HANDLE LEVER 8 PRP61M ROLL PIN 3 X 12 9 PH6069009 POWER BELT 3/8" X 10" 10 PR16 EXT RETAININ
Resumen del contenido incluido en la página 13
Model H6069 REF PART # DESCRIPTION 12 PHTEK29 TAP SCREW #5 X 1/2" 13 PH6069013 BEARING HOLDER 14 PH6069014 PLAIN BEARING 22MM X 11MM 15 PH6069015 WHEEL SHAFT ASSEMBLY 16 PS86M PHLP HD SCR M6-1 X 55 17 PW03M FLAT WASHER 6MM 18 PH6069018 AXLE SLEEVE 19 PH6069019 REDUCTION GEAR 20 PLN03M LOCK NUT M6-1 21 PH6069021 CAPACITOR HOLDER 22 PC006 CAPACITOR 6MFD 250V 23 PH6069023 POWER SWITCH 24 PHTEK6M TAP SCREW M4 X 16 25 PH6069025 LOWER HOUSING 26 PH6069026 CLAMPING PLATE 27 PH6069027 POWER CORD 28 PH
Resumen del contenido incluido en la página 14
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to
Resumen del contenido incluido en la página 15
WARRANTY CARD Name _________________________________________________________ Street _________________________________________________________ City____________________State________Zip_________ Phone Number____________E-Mail___________________Serial # ________ 9. How many of the machines checked above are 1. How did you learn about us? ___Advertisement ___Friend Grizzly? ____________ ___Catalog ___Card Deck 10. Which portable/hand held power tools do you own? ___World Wide Web ___Other__
Resumen del contenido incluido en la página 16
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE
