Resumen del contenido incluido en la página 1
KDC-9026R
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2758-00/00 (MV)
Resumen del contenido incluido en la página 2
Contents Safety precautions 4 Tuner/TV control features 27 Tuning Notes 6 Direct Access Tuning Station Preset Memory About CDs 7 Auto Memory Entry Preset Tuning Notes on playing MP3/WMA 8 SNPP (Station Name Preset Play) TV Tuning Notes on Multi-function Key Preset TV Tuning System 10 RDS features 30 Notes on Sound Management Traffic Information System 11 Radio Text Scroll PTY (Program Type) General features 12 Program Type preset Power Changing Language for PTY Function Hiding the Control Pane
Resumen del contenido incluido en la página 3
Menu system 38 Basic Operations of remote 46 Menu System Loading and Replacing the battery Security Code Basic operations Touch Sensor Tone In Tuner source Manual Clock Adjustment In Disc source Date Adjustment In TV source Date Mode Accessories/ Synchronize Clock Installation Procedure 48 DSI (Disabled System Indicator) Selectable Illumination Connecting Wires to Terminals 49 Triangle indicator setting Font Type Select Installation 51 Dimmer OFF Wait Time Setting Removing the Unit 53 Eject ang
Resumen del contenido incluido en la página 4
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the To prevent damage to the machine, take following precautions: the following precautions: • Insert the unit all the way in until it is fully locked • Make sure to ground the unit to a negative 12V in place. Otherwise it may fall out of place when DC power supply. jolted. • Do not open the top or bottom covers of the unit. • When extending the ignition, battery, or ground • Do not install the unit in a spot exposed to dire
Resumen del contenido incluido en la página 5
About CD players/disc changers NOTE connected to this unit • If you experience problems during installation, KENWOOD disc changers/ CD players released in consult your Kenwood dealer. 1998 or later can be connected to this unit. • If the unit fails to operate properly, press the Reset Refer to the catalog or consult your Kenwood button. The unit returns to factory settings when dealer for connectable models of disc changers/ the Reset button is pressed. If the unit still fails to CD play
Resumen del contenido incluido en la página 6
Notes Cleaning the Unit Dolby Pro Logic II If the faceplate of this unit is stained, wipe it with a The matrix decoding technologies that have been dry soft cloth such as a silicon cloth. evolved from the conventional Dolby Pro Logic If the faceplate is stained badly, wipe the stain off system and that is based on the latest digital matrix with a cloth moistened with neutral cleaner, then technologies. It realizes the excellent 5.1-channel wipe neutral detergent off. sound playback of Dolby
Resumen del contenido incluido en la página 7
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
Resumen del contenido incluido en la página 8
Notes on playing MP3/WMA Note, however, that the MP3/WMA recording media and formats acceptable are limited. When • Play mode may not be possible when portions of the writing MP3/WMA, pay attention to the following functions of Windows Media Player 9 or higher are used. restrictions. Entering ID3 tag Acceptable media The Displayable ID3 tag is ID3 version 1.x. The MP3/WMA recording media acceptable to this For the character code, refer to the List of Codes. unit are CD-ROM, CD-R, and CD-RW.
Resumen del contenido incluido en la página 9
MP3/WMA playing order When selected for play, Folder Search, File Search, When a File Search is executed with file ¡$ or for Folder Select, files and folders are accessed being played ... in the order in which they were written by the CD Operation of writer. (Current file: ¡$) the button Because of this, the order in which they are expected to be played may not match the order in 4 Button Beginning of file ¡$ ➜ ¡# which they are actually played. You may be able to ¢ Button ¡% ➜ ¡& set t
Resumen del contenido incluido en la página 10
Notes on Multi-function Key System Multi-function Key System serves to control various Real operational example of the Multi- functions function Key System with the [2] — [5] buttons. Example: Turning ON/OFF the Random Play during The basic operation of the Multi-function Key CD play. System is described below. 1. Show the function display of the Random Play. If "RDM" is not shown in the display, press the [NEXT] button to switch the sections until the What’s the Multi-function Key System?
Resumen del contenido incluido en la página 11
Notes on Sound Management System The KDC-9026R allows you to set up the best sound First, set up the sound field in your car by 'Audio field to your car using the audio setup. This is the setup (Easy mode)' (page 24). Proceed to the Sound Management System. following steps for sound field setup. There are two types of audio setup mode: 1. Enter Audio Setup mode. Easy audio setup (called Easy mode) and Press the [NEXT] button. Professional audio setup (called PRO mode). Repeatedly press the but
Resumen del contenido incluido en la página 12
General features ATT 1 - 6 NEXT SRC VOL Q 38 SCRL/ AM/ FM 4 ¢ NAME.S SW Hiding the control panel Power Press the [SRC] button for at least 1 second. When the time set in 'OFF Wait Time Setting' Turning ON the Power (page 41) lapses, the panel is hidden and the Turn the vehicle ignition ON. power turns OFF. The panel appears. Showing the control panel Press the left part at the lower side of the • When the power is ON, the 'Security Code' (page 38) is displayed as "CODE ON" or "CODE OFF". pan
Resumen del contenido incluido en la página 13
Selecting the Source Rotary Volume knob operation mode select Press the [SRC] button. The rotary volume knob can be used for volume Source required Display adjustment and various function setups. Tuner "TUNER" CD "Compact Disc" Available setup functions External disc (Optional accessory) "CD Changer" The rotary volume knob can be used for the TV (Optional accessory) "TV" following setup: Auxiliary input "AUX" • Menu system : Item selection Standby (Illumination only mode) "STANDBY" • Audio
Resumen del contenido incluido en la página 14
General features External disc, or Auxiliary input source Dual Zone System • The Dual Zone System can be used with the sources Makes the sound different for the front channel shown below. and rear channel. - Internal auxiliary input - KCA-S210A Output the Internal source sound from either one - CA-C1AX of the front or rear channels, and the sound of - External disc changer/ player other source from the Dual zone channel. • While Dual Zone System is ON, the setting of Dual Zone System Fron
Resumen del contenido incluido en la página 15
Display:A 2 Enter display control mode Press the [4] ("DISP") button. Side Graphic Display Switching 3 Select the display mode Switching the Side graphic Display. Press the [2] ("MODE") button. 1 Select the key function section Each time the button is pressed the display Press the [NEXT] button. mode switches as shown below. Repeatedly press the button until "DISP" is Display Mode Display displayed above the [4] button. "Display:A" Refer to 'Notes on Multi-function Key System' 1 2 1 (page 10)
Resumen del contenido incluido en la página 16
General features Display:A The text display in the Upper text display part Text Display Switching In Tuner source Switching the text display. Information Display 1 Select the key function section Program Service name or Frequency "BAND+ch+PS" Press the [NEXT] button. Radio text or Frequency "R-TEXT" Repeatedly press the button until "DISP" is Date "DATE" displayed above the [4] button. Clock "CLOCK" Refer to 'Notes on Multi-function Key System' Spectrum Analyzer & Clock "S/ANA+CLOCK" (page 10
Resumen del contenido incluido en la página 17
In Auxiliary input source In Standby Information Display Information Display Auxiliary input name "AUX NAME" KENWOOD Logo "LOGO" Date "DATE" Clock "CLOCK" Clock "CLOCK" Date "DATE" Spectrum Analyzer & Clock "S/ANA+CLOCK" In Auxiliary input source Information Display • If the Disc title, Track title, Song title & Artist name, or KENWOOD Logo "LOGO" Album name & Artist name is selected when the disc Clock "CLOCK" which does not have Disc title, Track title, Song title, Spectrum Analyzer & Clock
Resumen del contenido incluido en la página 18
General features Display:B/ Display:C/ Display:D Display:B/ Display:C/ Display:D Graphic part/ Spectrum Analyzer Wallpaper selecting Display Switching Select a wallpaper to display when Display Type is set to "Display:B"/ "Display:C"/ "Display:D". Switching the graphic Display/ Spectrum analyzer display. 1 Select the wallpaper display Refer to 'Graphic part/ Spectrum Analyzer Display 1 Select the key function section Switching' (page 18). Press the [NEXT] button. Repeatedly press the button u
Resumen del contenido incluido en la página 19
In Auxiliary input source 3 Select the display mode Press the [2] ("MODE") button. Information Display Select the "Display:B"/ "Display:C" display. Auxiliary input name "AUX NAME" Date "DATE" 4 Select the text Clock "CLOCk" Press the [3] ("TEXT") button. In Standby • It can also be switched by pressing either [4] or Information Display [¢] button. Standby (Illumination only mode) "STANDBY" In Tuner source Date "DATE" Clock "CLOCK" Information Display Program Service name or Frequency "BAND+ch
Resumen del contenido incluido en la página 20
General features Auxiliary Input Display Setting Adjustment Item Button Display The panel tilts upwards. [2] "ANG–" Selecting the display when this device is switched The panel tilts downwards. [3] "ANG+" to Auxiliary input source. The panel slides backward. [4] "SLD–" 1 Select Auxiliary input source The panel slides forward. [5] "SLD+" Press the [SRC] button. Select the "AUX" display. 4 Exit Panel Position Setting mode Press the [6] ("RTN") button. 2 Enter Auxiliary input display setting mode
