Resumen del contenido incluido en la página 1
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-S811R/KD-S713R/
KD-S711R
KD-S811R
KD-S713R
KD-S711R
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIK
Resumen del contenido incluido en la página 2
Position And Reproduction Of Labels Bottom panel of the main unit ADVARSEL: Usynlig laser - DANGER: Invisible laser VARNING: Osynlig las er- VARO: Avattaessa ja suo- radiation when open and stråling ved åbning, når strålning när denna del jalukitus ohitettaessa olet sikkerhedsafbrydere er ude interlock failed or defeated. är öppnad och spärren är alttiina näkymättömälle AVOI D DIRECT EXPOSURE af funktion. Undgåudsæt- urkopplad. Betrakta ej lasersäteilylle. Älä katso telse for stråling.
Resumen del contenido incluido en la página 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS .................. 17 Adjusting the sound ................................. 17 LOCATION OF THE BUTTONS ............ 4 Using the Control panel ............................................ 4 Sound Control Memory (SCM) ......
Resumen del contenido incluido en la página 4
LOCATION OF THE BUTTONS Control panel u i o ; asd fh g j Display window 23 4567 8 1 9p q w e r t y 1 (standby/on/attenuator) button Display window 2 Control dial u Volume (or audio) level indicator 3 DISP (display) button Equalization Pattern indicator 4 AM button i Tuner reception indicators 5 CD button STEREO, MONO 6 FM button o RND (random) indicator 70 (eject) button ; RDS indicators 8 4 /¢ buttons AF, EON, REG, TP, PTY • Also functions as SSM buttons when pressed a “SCM” indicator together
Resumen del contenido incluido en la página 5
BASIC OPERATIONS 132 4 Adjust the sound as you want (see Turning on the power page 17.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the power To resume the previous volume level, press the automatically comes on. You do not have to press button briefly again. this button to turn on the power.
Resumen del contenido incluido en la página 6
RADIO BASIC OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. Searching a station manually: Searching a station automatically: Manual search Auto search 1 Select the band (AM, FM1 – 3). 1 Select the band (AM, FM1 – 3). FM2 FM3 FM1 FM1 FM2 FM3 AM AM Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any
Resumen del contenido incluido en la página 7
3 Tune into a station you want while “M” Storing stations in memory is flashing. You can use one of the following two methods to Press ¢ to search store broadcasting stations in memory. stations of higher • Automatic preset of FM stations: SSM (Strong- frequencies. station Sequential Memory) • Manual preset of both FM and AM stations Press 4 to search stations of lower FM station automatic preset: SSM frequencies. You can preset 6 local FM stations in each FM band • If you release your finger
Resumen del contenido incluido en la página 8
Notes: Manual preset • A previously preset station is erased when a new station You can preset up to 6 stations in each band (FM1, is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during Ex: Storing an FM station of 88.3 MHz into the battery replacement). If this occurs, preset the stations preset number 1 of the FM1 band again. 1 Select the FM band (FM1 – 3) you want to store FM
Resumen del contenido incluido en la página 9
RDS OPERATIONS To use Network-Tracking Reception, press and What you can do with RDS EON hold TP RDS (Traffic Programme/Radio Data System) for more than 1 second. Each time you RDS (Radio Data System) allows FM stations to press and hold the button, Network-Tracking send an additional signal along with their regular Reception modes change as follows: programme signals. For example, the stations send their station names, as well as information about Mode 1 Mode 2 Mode 3 what type of programme the
Resumen del contenido incluido en la página 10
To deactivate the TA standby mode, press TP The same programme can be received on RDS again. different frequencies. Programme 1 broadcasting PTY Standby Reception Programme 1 on frequency A broadcasting When you press PTY while listening to on frequency E an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 11 flashes for 5 seconds. Programme 1 • When the station being received is not a PTY station, br
Resumen del contenido incluido en la página 11
Searching your favorite programme 2 Select “PTY STBY” (standby) if not shown on the display. You can search one of your 6 favorite programme types stored in memory. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search your favorite programme type, see 3 Select one of twenty-nine PTY codes. page 12. Selected code name appears 1 2 3 on the display and is stored POP M ROCK M EASY
Resumen del contenido incluido en la página 12
2 Select one of PTY codes stored in 2 Select “PTY SRCH” (search) if not preset number buttons (1 to 6). shown on the display. 3 Select one of twenty-nine PTY codes. Ex. When “ROCK M” is stored in preset number (See page 11.) button 2 Selected code name appears on the display. PTY search for your favorite programme starts • If the code already stored after 5 seconds. in memory is selected, it will flash on the display. • If there is a station broadcasting a programme of the same PTY code you sele
Resumen del contenido incluido en la página 13
To activate programme search, follow the procedure Setting the TA volume level below. You can preset the volume level for TA Standby • Programme search takes a while. Reception. When a traffic programme is received, • See also “Changing the general settings (PSM)” the volume level automatically changes to the preset on page 19. level. 1 Press and hold SEL (select) for more than 2 • See also “Changing the general settings (PSM)” seconds so that one of the PSM items appears on page 19. on the disp
Resumen del contenido incluido en la página 14
CD OPERATIONS To stop play and eject the CD Playing a CD Press 0. CD play stops and the CD automatically ejects from 1 Insert a disc into the loading slot. the loading slot. The unit turns on, If you change the source to FM or AM, the CD play draws a CD and starts also stops (without ejecting the CD this time). playback automatically. Notes: Note: • If the ejected disc is not removed for about 15 seconds, • When a CD is inserted the disc is automatically inserted again into the upside down, the
Resumen del contenido incluido en la página 15
Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) You can play back all tracks on the CD at random. To fast-forward or reverse the track Each time you press MO RND (monaural/random) while playing a CD, CD random play mode turns Press and hold ¢ , while on and off alternately. playing a CD, to fast-forward the track. Press and hold 4 , while playing a CD, to reverse the track. The RND indicator To go to the next tracks or the
Resumen del contenido incluido en la página 16
Prohibiting CD ejection You can prohibit CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and unlock the CD, press and hold CD and 0 again for more than 2 seconds, while pressing CD. “EJECT” appears on the display, and the CD ejects from the loading slot. 16 EN14-16.KD-S811/713/711R[E]15 16 07/12/2000, 05:13 PM ENGLISH
Resumen del contenido incluido en la página 17
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. To increase the level. You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the To decrease the level. adjustable items change as follows: BAS TRE FAD (bass) (treble) (fader) Equalization pattern changes as you adjust the bass or treble. BAL VOL LOUD (volume) (loudness) (balance) Note: Normally the control dial works for volume Indication To do: Range adjustment
Resumen del contenido incluido en la página 18
• When “SCM LINK” is set to “LINK ON”, the Storing your own sound selected sound mode can be stored in memory adjustments for the current source and the effect applies only to the current source. Each time you change the playback source, the SCM indicator flashes on You can adjust the sound modes (BEAT, SOFT, the display. POP) to your preference and store your own • When “SCM LINK” is set to “LINK OFF”, the adjustments in memory. selected sound mode effect applies to any source. • There is a tim
Resumen del contenido incluido en la página 19
OTHER MAIN FUNCTIONS Changing the general settings Setting the clock (PSM) You can also set the clock system either 24 hours or 12 hours. You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM Basic Procedure items appears on the display. 1 Press and hold SEL (select) for more (See page 20.) than 2 seconds so that one of the PSM items appears on the display. (See page 20.)
Resumen del contenido incluido en la página 20
Preferred Setting Mode (PSM) items 1 2 3 Factory- See Set. preset page settings Counter- Hold. Select. clockwise Clockwise CLOCK H Hour adjustment Back Advance 0:00 19 CLOCK M Minute adjustment Back Advance SCM LINK Sound control LINK OFF LINK ON LINK ON 18, 21 memory linkage 24H/12H 24/12-hour time 19 12H 24H 24H display AUTO ADJ Automatic clock OFF ON ON 13 setting DISPMODE Display mode FREQ PS NAME PS NAME 13 CLOCK 29 programme types PTY STBY PTY standby NEWS 11 (see page 11.) PTY SRCH PTY
