Resumen del contenido incluido en la página 1
CDX-880/580/480
Natural Sound Compact Disc Player
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc Repeat Play
Automatic Spacing Capability
Automatic Tape-Programming
Automatic Peak Level Searching Capability
CD Synchronized Recording with a Compatible YAMAHA Tape Disk
Display Brightness Changing Capability
Remote Control Capability
Thank you for selecting this YAMAHA Compact Disc Player.
OWNER’S MANUAL
CAUTION
CONTENTS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Instr
Resumen del contenido incluido en la página 2
SAFETY INSTRUCTIONS 10 Power Sources – The unit should be connected to a CAUTION power supply only of the type described in the operating instructions or as marked on the unit. RISK OF ELECTRIC SHOCK DO NOT OPEN 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying CAUTION: TO REDUCE THE RISK OF particular attention to cords at plugs, convenience ELECTRIC SHOCK, DO NOT REMOVE receptacles
Resumen del contenido incluido en la página 3
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual 7 Be sure to read the “TROUBLESHOOTING” section on carefully. Keep it in a safe place for future reference. common operating errors before concluding that your unit is faulty. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, 8. Do not place another component on top of this unit, moisture or cold. Avoid sources of hum (transfor
Resumen del contenido incluido en la página 4
CONNECTIONS Before making any connections, switch OFF the power to If the placement of this unit causes noise to other equipment, • • the unit and the amplifier or other component. such as a tuner, separate them from each other. Connections should be made to the correct input terminals of • the amplifier or other component. CDX-880 CDX-880 LINE OUT DIGITAL OUT VARIABLE FIXED OPTICAL COAXIAL To AC outlet ¸ Connection cord Optical fiber cable (not included) (not included) ˚ Connection cord Amp
Resumen del contenido incluido en la página 5
CDX-480 LINE OUT CDX-480 To AC outlet ˚ Connection cord Amplifier (included) CD Choose one of the ways listed below to connect this unit to your amplifier. When the LINE OUT (analog) terminals of this CDX-880 only unit are used ( ) When the DIGITAL OUT (OPTICAL) terminal of ˚ Be sure that the left (“L”) and right (“R”) LINE OUT terminals • this unit is used ( ) ¸ are connected to the corresponding (left and right) terminals Before using this terminal, remove the terminal’s cover by • of th
Resumen del contenido incluido en la página 6
IDENTIFICATION OF COMPONENTS * ( ) indicates the page number on which the control part is best described. FRONT PANEL * The control functions on the main unit and on the remote * The PLAY/PAUSE button on the main unit has both the control transmitter are virtually identical, with the exceptions functions of the PLAY button and the PAUSE button on the below. remote control transmitter. CDX-880 POWER switch (p. 8) AUTO DISPLAY OFF indicator (p. 11) OUTPUT LEVEL control (p. 11) POWER switch (p.
Resumen del contenido incluido en la página 7
* ( ) indicates the page number on which the control part is best described. REMOTE CONTROL TRANSMITTER DIMMER button (p. 11) CLEAR button (p. 14) TAPE button (p. 15) OPEN/CLOSE button (p. 8) OPEN/CLOSE TIME DIMMER TIME button (p. 10) PROG button (p. 13) PROG TAPE CLEAR PEAK PEAK button (p. 18) SPACE S/F RANDOM REPEAT SPACE button (p. 10) RANDOM button (p. 12) 12 3 +10 REPEAT button (p. 10) Numeric buttons (p. 9) 4 56 78 9 0 PAUSE button (p. 9) SKIP PAUSE PLAY PLAY button (p. 8) SKIP buttons
Resumen del contenido incluido en la página 8
This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION OPEN/CLOSE TIME DIMMER 2, 3 PROG TAPE CLEAR PEAK SPACE S/F RANDOM POWER REPEAT 12 3 +10 1 4 56 AUTO DISPLAY OFF 78 9 0 SKIP PAUSE PLAY 4 SEARCH INDEX STOP – OUTPUT LEVEL + SYNCHRO 1 3 Close the disc tray. POWER OPEN/CLOSE 2 Label side 4 upward OPEN/CLOSE PLAY Disc tray Play will begin from the first tra
Resumen del contenido incluido en la página 9
To stop play temporarily To stop play completely PAUSE STOP To resume play, press the PAUSE button again (or press the PLAY button). * The PLAY/PAUSE button on the front panel can also be used to stop play temporarily or to resume play. To play a desired track on the disc DIRECT PLAY SKIP PLAY To play from the beginning of the track following the one now Select a desired track using the numeric button. playing SKIP 5 To play from the beginning of the track now playing SKIP The selected track num
Resumen del contenido incluido en la página 10
To advance or reverse play rapidly (MANUAL SEARCH) To advance rapidly The sound can be heard (although slightly garbled) during • manual search in either direction. This is convenient for SEARCH locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is • (Press and hold.) paused, though no sound will be heard. • CDX-580 and CDX-480 only When using the SKIP/SEARCH button on the front panel: To reverse rapidly Be car
Resumen del contenido incluido en la página 11
Changing brightness of the display CDX-880, CDX-580 You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button. During play During stopped or paused Normal illumination Normal illumination DIMMER Dim Dim Dim “OFF” (The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.) * While the display illumination is off, the AUTO DISPLAY OFF indicator AUTO on the front panel is illuminate
Resumen del contenido incluido en la página 12
RANDOM-SEQUENCE PLAY You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer. Notes To perform random-sequence play This feature will not function during programming, or during • programmed play. If the POWER is switched off when the random-sequence • play mode is functioning, when the POWER is switched on RANDOM again, the unit will begin the random-sequence play automatically. (This feature is available for timer play.) If the SKIP button is p
Resumen del contenido incluido en la página 13
PROGRAM PLAY You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be programmed. OPEN/CLOSE TIME DIMMER PROG TAPE CLEAR PEAK 2 SPACE S/F RANDOM REPEAT 12 3 +10 3 4 56 78 9 0 4 SKIP PAUSE PLAY SEARCH INDEX STOP 1 – OUTPUT LEVEL + SYNCHRO 1 Stop the unit. 3 Select the desired track. 5 STOP * Repeat this operation to program more tracks. You can select the same track again. 2 4 PLAY PROG PROGRAM TOTAL Display information during progra
Resumen del contenido incluido en la página 14
To stop program play To check programmed data Press the STOP button. The first programmed track number 1. If during program play, press the STOP button. will be displayed. 2. Press the PROGbutton. To resume play, press the PLAY button. Play will begin from 3. Each time the SKIP button is pressed, the track the beginning of the program. numbers and sequential order of the programmed tracks can be checked one after another. The display of the To cancel a programmed setting track number can be r
Resumen del contenido incluido en la página 15
TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. Automatic tape-programming n This is for recording only the tracks which best fit onto a tape. OPEN/CLOSE DIMMER TIME PROG TAPE CL
Resumen del contenido incluido en la página 16
Manual tape-programming n This is for recording desired tracks in any desired order onto a tape. OPEN/CLOSE DIMMER TIME TAPE CLEAR PEAK PROG 4 2 SPACE S/F RANDOM REPEAT 12 3 +10 4 56 3, 5 78 9 0 SKIP PAUSE PLAY 6, 7 SEARCH INDEX STOP 7 – + OUTPUT LEVEL SYNCHRO 1 Follow steps 1 – 4 on page 15. 5 Select the track numbers (to be recorded on side B) in the desired order. 12 3 + 10 2 4 56 78 9 0 PROG PROGRAM A TOTAL REMAIN 1 2 3 4 5 6 7 8 9 10 11 12 6 Begin recording on the tape de
Resumen del contenido incluido en la página 17
Random sequential tape-programming n The unit will automatically program tracks in random sequential order for recording to tape. OPEN/CLOSE DIMMER TIME PROG TAPE CLEAR PEAK SPACE S/F RANDOM REPEAT 2 12 3 +10 4 56 78 9 0 SKIP PAUSE PLAY 3, 4 SEARCH INDEX STOP 4 – OUTPUT LEVEL + SYNCHRO Notes Because the programmed data changes every time the • 1 Follow steps 1 – 4 on page 15. RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. If the tape’s len
Resumen del contenido incluido en la página 18
Automatic searching of the peak level on a disc This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. OPEN/CLOSE DIMMER TIME PROG TAPE CLEAR PEAK 2 SPACE S/F RANDOM REPEAT 12 3 +10 4 56 78 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP 1 – OUTPUT LEVEL + SYNCHRO To cancel this function Press the STOP button. (Some other butt
Resumen del contenido incluido en la página 19
CD SYNCHRONIZED RECORDING This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control tran
Resumen del contenido incluido en la página 20
30° NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range 1 3 Remote control sensor 2 Within approximately 7 m (23 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct. (See the illustration inside • the battery compartment.) Notes
