Manual de instrucciones de Harbor Freight Tools 96445

Resumen del contenido incluido en la página 1

5” palm grip sander
model 96445
OperatiOn instructiOns
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
tO preVent seriOus injury, read and understand
all warnings and instructiOns befOre use.
© ®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any sha

Resumen del contenido incluido en la página 2

specificatiOns Overall Dimensions 6-1/2” L x 5” O.D. x 4-1/4” H Sanding Pad Size 5” diameter Maximum RPM 10,000 RPM Air Inlet Size 1/4”-18 NPT Arbor Size 5/16”, 24 TPI Handle Type Palm style Sanding Pad Fastening Method Hook and Loop Maximum PSI 90 PSI Recommended Hose Size 3/8” Weight 2.4 Lbs. save this manual You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this man

Resumen del contenido incluido en la página 3

7. use eye and ear protection. Always wear ANSI-approved impact safety goggles and hearing protection. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI-approved dust mask or respira- tor when working around metal, wood, and chemical dusts and mists. 8. do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. maintain tools with care. Keep tools clean for better and safer performance.

Resumen del contenido incluido en la página 4

20. warning : t he brass components of this product contain lead, a chemical known to the state of california to cause birth defects (or other reproductive harm). (california Health & safety code § 25249.5, et seq.) 21. warning: the warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product

Resumen del contenido incluido en la página 5

assembly installing the sanding pad 1. Disconnect the air hose from the tool. 2. Select the appropriate Sanding Pad (not included), and press it onto the Backing Pad (41). Firmly press the Sanding Pad onto the Backing Pad (41), making certain it is securely in place. Failure to properly secure the Sanding Pad may cause the Sanding Pad to come loose, possibly causing personal injury or property damage. installing the backing pad 1. Disconnect tool from air supply. 2. Slide Wrench (39) under

Resumen del contenido incluido en la página 6

inspectiOn, maintenance and cleaning 1. Make sure your Palm Grip Sander is disconnected from the air hose before attempting any maintenance. 2. Wipe the Palm Grip Sander down with a lint free cloth after each use. 3. If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that the Valve (12) is facing up. Squeeze the Trigger (1), and place one or two drops of oil into the Valve (12). Squeezing the Trigger (1) allows the oil to circulate in the motor. 4. Sto

Resumen del contenido incluido en la página 7

parts list part description Q’ty part description Q’ty 1 Trigger 1 24 Bearing 1 2 Trigger Bolt 1 25 Front Spacer 1 3 Outer Housing 1 26 Main Axle 1 4 Casing 1 27 Shaft 1 5 Valve Core 1 28 Tilting Axle (Arbor) 1 7 Seal Ring 1 29 Bearing 1 8 Seal Ring 1 30 Bearing 1 9 Valve Needle 1 31 Soft Washer 1 10 Spring 1 32 Cover 1 11 Bolt 1 33 Clip Ring 1 12 Valve 1 34 Washer 1 13 Screw 2 35 Screw 1 14 Washer 1 36 Cover 1 15 Bearing 1 37 Cover 1 16 Rear Plate 1 38 Screw 1 17 Rear Spacer 1 39 Wrench 1 18 Cy

Resumen del contenido incluido en la página 8

assembly diagram REV 07h Page 8 SKU 96445 for technical questions, please call 1-800-444-3353

Resumen del contenido incluido en la página 9

limited 90 day warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio