Manual de instrucciones de Grizzly Pneumatic Jitterbug H0594

Resumen del contenido incluido en la página 1

MODEL H0594
PNEUMATIC JITTERBUG
SANDER
INSTRUCTION SHEET
Assembly and Attaching Abrasives
To assemble the sander and attach the sand-
paper:
EYE INJURY HAZARD!
Always wear safety glasses
1
1. Install a ⁄4" NPT male quick-disconnect fitting
when using this tool to
(not included) into the air inlet.
prevent serious personal
injury.
2. Press one clamp open, insert one end of the
INJURY HAZARD!
sandpaper between the clamp and the base
Always disconnect tool from
as shown in Figure 2 and re

Resumen del contenido incluido en la página 2

Operation Maintenance To operate the sander: Lubricate at the beginning of the sanding task. Place one or two drops of pneumatic tool oil 1. Plug the tool into compressed air. directly into the air fitting as shown in Figure 5. 2. Hold the sander and press the throttle lever (Figure 4) to operate. Throttle Lever Figure 5. Lubricating directly into air fitting. A filter/lubricator/regulator setup is not recom- Regulator mended, as excess oil in the tool could spray onto Knob the workpiece

Resumen del contenido incluido en la página 3

H0594 Parts Breakdown and List �� �� �� �� �� �� �� � �� �� �� �� �� �� � � �� �� � �� �� �� � � �� � � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH0594001 MOTOR HOUSING 24 PH0594024 ROTOR SHAFT 3 PH0594003 MUFFLER 25 PH0594025 ROTOR KEY 4 PH0594004 HOUSING ADAPTOR 26 PH0594026 BASE 5 PH0594005 SPRING 27 PH0594027 GASKET 6 PH0594006 O-RING 28 PS09M PHLP HD SCR M5-.8 X 10 7 PH0594007 PLUNGER 29 PLW01M LOCK WASHER 5MM 8 PH0594008 SPEED

Resumen del contenido incluido en la página 4

® Buy Direct and Save with Grizzly – Trusted, Proven and a Great Value! ~Since 1983~ Visit Our Website Today For Current Specials! ORDER 24 HOURS A DAY! 1-800-523-4777