Manual de instrucciones de Grizzly H8192

Manual de instrucciones del aparato Grizzly H8192

Aparato: Grizzly H8192
Categoría: Lijadora
Fabricante: Grizzly
Tamaño: 6.72 MB
Fecha de añadido: 4/3/2013
Número de páginas: 36
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Grizzly H8192. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Grizzly H8192.

Para tu comodidad

Si ver los manuales de instrucción de Grizzly H8192 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Grizzly H8192 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Grizzly H8192 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Grizzly H8192 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Grizzly H8192, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Grizzly H8192. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

MODEL H8192
1" BELT/8" DISC
COMBINATION SANDER
OWNER'S MANUAL
COPYRIGHT © AUGUST, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS9703 PRINTED IN CHINA

Resumen del contenido incluido en la página 2

����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������

Resumen del contenido incluido en la página 3

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Contact Info ................................................................................................................................ 2 Machine Data Sheet ................................

Resumen del contenido incluido en la página 4

INTRODUCTION Foreword Contact Info If you have any comments regarding this manual, We are proud to offer the Model H8192 please write to us at the address below: 1" Belt/8" Disc Combination Sander. This machine is part of a growing Grizzly family of fine Grizzly Industrial, Inc. woodworking machinery. When used according C /O Technical Documentation Manager to the guidelines set forth in this manual, you can P.O. Box 2069 expect years of trouble-free, enjoyable operation Bellingham, WA 9

Resumen del contenido incluido en la página 5

Machine Data Sheet � � � � � � �� � � � �� � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������ ����� ��� ��� ����� ������� ����� ����� ������ ������� ���� ��������������������������������������������������������������� � ������������������������������������������������������������������������������������������� ������ ����� �������� ����������� � ������� ���������������

Resumen del contenido incluido en la página 6

Identification B A C D F E G H P L I J M O K N Figure 1. Model H8192 identification. A. Sanding Belt 1" x 42" I. Motor B. Sanding Belt Tracking Knob J. Disc Table Angle Scale C. Sanding Disc 8" K. Disc Table Lock Handle D. Miter Gauge L. Disc Dust Port E. Disc Table M. ON/OFF Switch with Disabling Key F. V-Belt Safety Cover N. Rubber Machine Feet G. Sanding Belt Safety Cover O. Sanding Belt Table Lock Handle H. Sanding Belt Dust Port P. Sanding Belt Table -4- Model H8192 1" Belt/8" Disc Combo Sa

Resumen del contenido incluido en la página 7

� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �

Resumen del contenido incluido en la página 8

� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �

Resumen del contenido incluido en la página 9

Additional Safety Instructions for Belt and Disc Sanders 1. RESPIRATOR AND SAFETY GLASSES. 6. UNATTENDED OPERATION. Never leave Always wear a respirator and safety glasses the machine running attended. while operating the sander. Dust and chips are created when sanding. Some debris will 7. DUST COLLECTION SYSTEM. Always be ejected, becoming hazards to the eyes operate the sander with an adequate dust and lungs. collection system in place and running. 2. AVOIDING ENTANGLEMENT. DO NOT 8. FEED

Resumen del contenido incluido en la página 10

SECTION 2: CIRCUIT REQUIREMENTS 110V Operation Electrocution or fire could result if this machine is not grounded correctly or if your electrical Serious personal injury could occur if you configuration does not connect the machine to the power source comply with local and state before you have completed the set up pro- codes. Ensure compliance cess. DO NOT connect the machine to the by checking with a power source until instructed to do so. qualified electrician! Amperage Draw The Mo

Resumen del contenido incluido en la página 11

SECTION 3: SETUP Setup Safety Items Needed for Setup The following items are needed to complete the This machine presents setup process, but are not included with your serious injury hazards machine: to untrained users. Read through this entire Description Qty manual to become • Safety Glasses (for each person) .............. 1 familiar with the controls • Phillips Head Screwdriver .......................... 1 and operations before • Wrench 14mm ........................................

Resumen del contenido incluido en la página 12

Inventory The following is a description of the main B components shipped with your machine. Lay the A components out to inventory them. C Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally D we pre-install certain components for shipping F purposes. G E Inventory: (Figures 3–4) Qty Figure 3. Model H8192 inventory items A–G. A. Motor and Base .......................................... 1 B. Belt

Resumen del contenido incluido en la página 13

Hardware Recognition Chart -11- Model H8192 1" Belt/8" Disc Combo Sander

Resumen del contenido incluido en la página 14

Clean Up Site Considerations The unpainted surfaces are coated with a waxy Placement Location oil to prevent corrosion during shipment. Remove Consider existing and anticipated needs, size of this protective coating with a solvent cleaner or material to be processed through each machine, citrus-based degreaser such as Grizzly’s G7895 and space for auxiliary stands, work tables or Citrus Degreaser. To clean thoroughly, some parts other machinery when establishing a location for must be r

Resumen del contenido incluido en la página 15

Assembly Assembly To avoid risk of serious injury, DO NOT connect the sander to power until told to do so in the Test Run subsection. To assemble your combo sander: Figure 7. Cap screws securing the belt housing 1. Using 13mm wrenches, loosen the four motor assembly (viewed from underneath the base). mount hex bolts (Figure 6) so you can adjust the motor position in the next steps. Belt Housing Assembly Motor Mounting Base Hex Bolts (2 of 4) Figure 8. Belt housing assembly installed. Figu

Resumen del contenido incluido en la página 16

Deflection 5. Position the belt housing assembly so there 7. Secure the right side of the V-belt cover with 1 is about ⁄4" V-belt deflection when moderate one M4-.7 x 10 Phillips head screw and flat pressure is applied to the V-belt between the washer. pulleys (see Figure 10)—then fully tighten the cap screws to secure the belt housing 8. Position the V-belt rear cover, as shown in assembly in place. Figure 12, and secure it in place with the M4- .7 x 40 Phillips head screw and wingnut. Wing

Resumen del contenido incluido en la página 17

9. Peel the backing from the 8" sandpaper disc 15. Lay the sander down on a flat surface, as and apply it to the aluminum disc. shown in Figure 15, and place a thin piece of 1 cardboard approximately ⁄16" thick over the 10. Thread the M5-.8 x 5 set screw into the sanding disc. This piece of carboard will act aluminum disc shaft. as a spacer when you install the disc table. 11. Slide the aluminum disc onto the motor arbor, making sure to align the arbor key with the disc keyway. 12. Rotate

Resumen del contenido incluido en la página 18

1 17. Secure the dust port, as shown in Figure 17, 20. Install the belt table with a ⁄16" clearance from with the M6-1 x 15 Phillips head screw and the sanding belt, and secure it in place with flatwasher. the table lock handle (see Figure 19). Mounting Screw Figure 17. Disc dust port installed. Figure 19. Sanding belt table installed. Note: Make sure the dust port covers the 21. Loosen the cap screw shown in Figure 20, 1 entire opening in the dust cover. adjust the belt support approximatel

Resumen del contenido incluido en la página 19

5. Turn the machine OFF. Test Run 6. Remove the switch disabling key, as shown in Figure 21. Once the assembly is complete, test run your sander to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly, and 2) the switch disabling mechanism on the switch works correctly. If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine

Resumen del contenido incluido en la página 20

Mounting Mounting Sander Dust Collection Once you have confirmed that your machine is running properly, mount it to a workbench. DO NOT operate the Model H8192 without The strongest mounting option is a "Through an adequate dust collection system. This Mount" where holes are drilled all the way through sander creates substantial amounts of wood the workbench, and hex bolts, washers, and dust while operating. Failure to use a dust lock nuts are used to secure the sander to the collection


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Grizzly 7" Angle Polisher H0593 Manual de instrucciones Lijadora 0
2 Grizzly 37'' WIDE BELT G0446 Manual de instrucciones Lijadora 0
3 Grizzly 37'' WIDE BELT G0539 Manual de instrucciones Lijadora 1
4 Grizzly Air Belt H0596 Manual de instrucciones Lijadora 0
5 Grizzly Belt G0581 Manual de instrucciones Lijadora 2
6 Grizzly Bending Brake T21319 Manual de instrucciones Lijadora 0
7 Grizzly 9962ZX Manual de instrucciones Lijadora 0
8 Grizzly BLU-RAY DISC DRIVE GBC-H20L Manual de instrucciones Lijadora 2
9 Grizzly Belt H2933 Manual de instrucciones Lijadora 0
10 Grizzly 37'' WIDE BELT G0571 Manual de instrucciones Lijadora 1
11 Grizzly Double head Wide Belt G0581 Manual de instrucciones Lijadora 1
12 Grizzly Drum H2882 Manual de instrucciones Lijadora 0
13 Grizzly Disc G0724 Manual de instrucciones Lijadora 0
14 Grizzly Double head Wide Belt H2933 Manual de instrucciones Lijadora 1
15 Grizzly G0446 Manual de instrucciones Lijadora 0
16 3Com Tech Note Wireless Remote Control TT24 Manual de instrucciones Lijadora 2
17 Agilent Technologies 16440A SMU Manual de instrucciones Lijadora 0
18 Alpha Industries AEP-458 Manual de instrucciones Lijadora 0
19 Bausch & Lomb DISCOVERER 78-1600 Manual de instrucciones Lijadora 12
20 Agilent Technologies 83485A Manual de instrucciones Lijadora 1