Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
FCC INFORMATION COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Corporation of America Address: 6600 Orangethorpe Ave. Buena Park, CA 90620 Telephone: 714-522-9011 Fax: 714-228-3913 Type of Equipment: CD Recordable/Rewritable Drive Model Name: CRW2100E CRW2100E-NB This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept an
Resumen del contenido incluido en la página 3
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
Resumen del contenido incluido en la página 6
SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING These precautions explain how to use the device correctly and safely, thereby preventing injury to yourself or to others. This section has been sub-divided into a WARNING section and a CAUTION section, according to the likelihood and nature of any potential injuries or damage inflicted. They relate to your personal safety, and also help you minimize the risk of damaging the device. Please read these sections carefully before proceedin
Resumen del contenido incluido en la página 7
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to yourself or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Always unplug the computer from the electrical outlet if it will not be used for a prolonged period of time or if there is a risk of lightning. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire. Do not expose the device to e
Resumen del contenido incluido en la página 8
About CD-R/RW discs Please read the following regarding the handling of CD-R/RW discs. 1. Do not expose discs to excessive heat such as in direct sunlight or near a heater. Also avoid keeping them in a humid place. 2. Do not touch disc surfaces. When handling a disc, hold it by its edges. 3. Remove dust and dirt from disc surfaces. Use air-based dust removers. The surfaces may be scratched if wiped with a dry cloth. 4. Do not stick labels on disc surfaces. 5. Do not write on disc surfaces exc
Resumen del contenido incluido en la página 9
Table of Contents Introduction ....................................................................... 1 Features of the CRW2100E Drive ................................................... 1 Before Use ......................................................................... 3 System Requirements ...................................................................... 3 Supported Discs .............................................................................. 4 Tools ...........................
Resumen del contenido incluido en la página 10
Introduction Features of the CRW2100E Drive High speed The CRW2100E drive supports up to 16X speed writing of a CD-R disc, and up to 10X speed writing of a CD-RW disc. For example, an audio CD (79 minutes/ 700MB) can be created in approximately 5 minutes. With newly adopted Partial CAV writing method (See the following column), you can write a disc by directly transferring content data from a 32X-speed or faster CD-ROM drive. Data reading at up to 40X speed is supported. CD TEXT support The C
Resumen del contenido incluido en la página 11
Introduction *1 Pure-Phase Laser System (patent applied for) Technology that reduces phase interference of the laser beam, so that it shines accurately on the disc. *2 Jitter value An important measure of recording quality. This has been improved 25% compared with Yamaha models not using this technology. *3 Running OPC (Optimum Power Control) CD-R/RW discs vary by manufacturer in their recording characteristics, and the laser output required to write data differs by disc. Running OPC is technolo
Resumen del contenido incluido en la página 12
Before Use System Requirements In order to use the CRW2100E drive, your computer system will need to meet the following set of requirements. n The CRW2100E drive may not write at a maximum speed depending on your computer’s system configuration. PC/AT-Compatible Computer CPU: Pentium II-class or higher, 300MHz or faster. RAM: 32MB memory (64MB or more recommended). n If you are using Windows 2000 operating system, you need 64MB or more memory. A 5.25-inch drive bay for mounting the drive (if the
Resumen del contenido incluido en la página 13
Resumen del contenido incluido en la página 14
Before Use About CD-ROM A CD-ROM disc is a compact disc containing high-density read-only data. It has many applications, including the playback of music and video, the archiving of data, as well as on-line documentation. The following are descriptions of each CD-ROM format: CD-DA: Up to 74 minutes of stereo audio is written in 16-bit resolution at a sampling rate of 44.1kHz for a 74 minutes disc. Data CD: Up to 650 megabytes of computer data is stored in standard ISO9660 format for a 650MB dis
Resumen del contenido incluido en la página 15
Front and Rear of Unit Front Panel The CRW2100E drive’s front panel features the following: Eject button Disc tray Manual Eject hole Press this button when you The tray is used to hold the disc. Only use this if no other need to open or close the It slides out from the drive unit method is available for tray. Remove the disc after when a disc needs to be loaded unloading a disc. the tray has opened. or unloaded. LED Headphone jack Headphone volume Indicates the operation You can connect
Resumen del contenido incluido en la página 16
Front and Rear of Unit Rear Panel The CRW2100E drive’s rear panel features the following: IDE INTERFACE connector DIGITAL AUDIO OUT connector Insert the connector of the IDE cable If your sound card has a digital audio here. Make sure you align the red line input, you can connect this connector of the ribbon cable with pin 1 of the to that digital input using a digital drive’s connector, marked “IDE audio cable (sold separately). INTERFACE CONNECTOR 1.” IDE INTERFACE AUDIO OUT CONNECTOR
Resumen del contenido incluido en la página 17
Setup Flowchart This flowchart shows the procedure for setting up the CRW2100E drive. For easy cross-referencing, the relevant pages in this manual are also given. STEP Connecting the CRW2100E Drive 1. Opening the Computer (P. 10) 1 2. Choosing the Connecting Method (P. 11) 3. Setting the Jumper Switches (P. 15) 4. Installing the CRW2100E Drive (P. 16) STEP Configuring in the Operating System (P. 24) 2 Check that the CRW2100E drive is recognized correctly. STEP Installing the CD Writing
Resumen del contenido incluido en la página 18
Resumen del contenido incluido en la página 19
Resumen del contenido incluido en la página 20
Setup Procedures Choosing the Connecting Method 4 First make sure how existing IDE devices are connected to your computer, and then determine how to connect the CRW2100E drive in conjunction with those devices. As an additional drive (set as secondary slave) If the casing of your computer has a spare 5.25-inch drive bay available, such as with many tower-type designs, you can install the CRW2100E drive in addition to the computer’s existing CD-ROM drive. CRW2100E As a replacement drive (set
