Resumen del contenido incluido en la página 1
CDC-902/502
Natural Sound Compact Disc Player
Lecteur de disque audionumérique de la série “Natural Sound”
Thank you for selecting this YAMAHA Compact Disc Player.
Nous vous remercions d’avoir porté votre choix sur ce lecteur de disque
audionumérique YAMAHA.
OWNER’S MANUAL MODE D’EMPLOI
CONTENTS TABLE DES MATIERES
Safety Instructions.................................................. 2
Caractéristiques .................................................. 24
Features.................................
Resumen del contenido incluido en la página 2
SAFETY INSTRUCTIONS 9 Heat – The unit should be situated away from heat CAUTION sources such as radiators, stoves, or other appliances that produce heat. RISK OF ELECTRIC SHOCK DO NOT OPEN 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE 11 Power-Cord Protection – Power-supply cords should be PARTS I
Resumen del contenido incluido en la página 3
English CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual 9 To prevent damage by lightning, disconnect the power cord from the household AC outlet during an electrical carefully. Keep it in a safe place for future reference. storm. 2 Install your unit in a cool, dry, clean place – away from 10 When disconnecting the power cord from the household windows, heat sources, and too much vibration, dust, AC outlet, grasp the plug; do not pull the
Resumen del contenido incluido en la página 4
FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product This product, when installed as indicated in the is found to be the source of interference, which can be instructions contained in this manual, meets FCC determined by turning the unit “OFF” and “ON”, please try requirements. Modifications not expressly approved by to eliminate the proble
Resumen del contenido incluido en la página 5
English CONNECTIONS l l Before making any connections, switch OFF the power to If the placement of this unit causes noise to other the unit and the amplifier or other component. equipment, such as a tuner, separate them from each other. l Connections should be made to the correct input terminals of the amplifier or other component. CDC-502 CDC-902 LINE OUT LINE OUT DIGITAL AUDIO OUT OPTICAL To AC outlet To AC outlet Optical fiber cable ¸ (not included) ˚ Connection cord (included) Connection co
Resumen del contenido incluido en la página 6
IDENTIFICATION OF COMPONENTS * ( ) indicates the page number on which the control and its function are best described. FRONT PANEL * The control functions on the main unit and on the remote * The (PLAY/PAUSE) button on the main unit has both control transmitter are virtually identical, with the exceptions the functions of the PLAY button and the PAUSE button on below. the remote control transmitter. * The SKIP/SEARCH buttons on the main unit have both the functions of the SKIP button and the
Resumen del contenido incluido en la página 7
English * ( ) indicates the page number on which the control button is best described. REMOTE CONTROL TRANSMITTER CDC-902 only TAPE button (p. 18) DIMMER button (p. 12) TIME display mode-select button (p. 11) OPEN/ SYNCHRO DIMMER TIME CLOSE SYNCHRO button (p. 17) OPEN/CLOSE button (p. 8) TAPE CLEAR PROG PROG button (p. 14) 1 2 3 INDEX CLEAR button (p. 15) 4 5 6 +10 Numeric buttons (p. 10) INDEX button (p. 16) Disc play MODE-select button 7 8 9 0 (p. 8) REPEAT button (p. 16) DISC SCAN MODE
Resumen del contenido incluido en la página 8
This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION CDC-902 CDC-502 OPEN/ OPEN/ SYNCHRO DIMMER TIME CLOSE SYNCHRO DIMMER TIME CLOSE 2, 3 2, 3 TAPE CLEAR PROG CLEAR PROG 1 2 3 1 2 3 INDEX INDEX 4 5 6 +I0 4 5 6 +I0 7 8 9 0 7 8 9 0 4 4 POWER DISC SCAN MODE REPEAT RANDOM DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH DISC SKIP SEARCH 5 5 –+ OUTPUT LEVEL SKIP S
Resumen del contenido incluido en la página 9
English Notes Display information at disc play l After closing the disc tray by pressing the OPEN/CLOSE button when this unit is stopped or after selecting any disc by using the DISC SKIP button when this unit is stopped, `´ˆ the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds. 5DISC REMAIN 5DISC 3 4 5 6 7 8 9 10 1 1 12 TOTAL 1 2 3 4 5 6 7 8 9 10 1 1 12 ˜ ¯ l Additionally, you can close the disc tray by pressin
Resumen del contenido incluido en la página 10
To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track by using the numeric buttons. To play from the beginning of the track following the one now playing 5 SKIP To play from the beginning of the track now playing 1DISC SKIP The selected track number is displayed. 5 6 7 8 9 10 1 1 12 Example: To select track 25 Press twice, then immediately press once. To play from the beginning of the track before the one now ` playing +10 5 SKIP ` (Twice) l These operatio
Resumen del contenido incluido en la página 11
English Scanning discs to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed when this unit is stopped, this unit will play an initial part of each disc in turn. Each disc is played for 8 seconds. DISC SCAN If, during this play, you find a disc that you want to listen to, press the DISC SCAN button once again or press the PLAY button to cancel this function. The unit will enter into the normal play mode. Notes l During this play, the disc tray num
Resumen del contenido incluido en la página 12
Changing brightness of the display If desired, you can change brightness of the display Normal illumination in three degrees by pressing the DIMMER button. DIMMER Slightly dim Dim CDC-902 only CDC-902 only When you listen with headphones Adjusting the level of signals output into an amplifier, etc. Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL button. You can adjust the level of sound signals output from the LINE * Note that the use of the OUTPUT LE
Resumen del contenido incluido en la página 13
English RANDOM-SEQUENCE PLAY You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or a designated disc on the disc tray. CDC-902 CDC-502 OPEN/ OPEN/ SYNCHRO DIMMER TIME CLOSE SYNCHRO DIMMER TIME CLOSE 2 2 TAPE CLEAR PROG CLEAR PROG 1 2 3 1 2 3 INDEX INDEX 4 5 6 +I0 4 5 6 +I0 7 8 9 0 7 8 9 0 3 3 DISC SCAN MODE REPEAT RANDOM DISC SCAN MODE REPEAT RANDOM 4 4 DISC SKIP SEARCH DISC SKIP SEARCH DISC SKIP DISC SKIP –+ OUTPUT LEVEL SKI
Resumen del contenido incluido en la página 14
PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks. CDC-902 CDC-502 OPEN/ OPEN/ SYNCHRO DIMMER TIME SYNCHRO DIMMER TIME CLOSE CLOSE TAPE CLEAR PROG CLEAR PROG 3 3 1 2 3 1 2 3 INDEX INDEX 4 5 6 +I0 4 5 6 +I0 5 5 7 8 9 0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH DISC SKIP SEARCH 2, 4 2, 4 –+ OUTPUT LEVEL SKIP SKIP STOP PAUSE PLAY STOP PAUSE PLAY 1 7 1 7 1 Stop the unit. 4 I
Resumen del contenido incluido en la página 15
English Notes Display information during programming l You can program as many as 40 tracks at one time. l You can program a whole disc by pressing “0”, instead of one track. At that time, “AL” flashes on the display. l The total time of the programmed tracks will not be PROG displayed, if a track number higher than 20 is programmed. TOTAL l If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programm
Resumen del contenido incluido en la página 16
REPEAT PLAY You can play any desired track or disc (or a set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. SINGLE REPEAT (REP S) A single track is repeatedly played. * This is also available in the program play mode and the (OFF) random-sequence play mode. (If the repeat play mode is switched off, the program play mode or the random- sequence play mode will be resumed.) REPEAT REP S FULL REPEAT (REP F) In the “1DISC” d
Resumen del contenido incluido en la página 17
English CD SYNCHRONIZED RECORDING This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote cont
Resumen del contenido incluido en la página 18
TRACK PROGRAMMING FOR RECORDING TO TAPE for CDC-655 only for CDC-902 only This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. OPEN/ SYNCHRO DIMMER TIME CLOSE n Automatic tape programming TAPE CLEAR PROG 4 1 2 3 INDEX The unit will a
Resumen del contenido incluido en la página 19
English n Manual tape programming OPEN/ SYNCHRO DIMMER TIME CLOSE This is for recording desired tracks selected TAPE CLEAR PROG from one or more discs in any desired order onto tape. 8 4, 11 1 2 3 INDEX 4 5 6 +I0 6 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH 2, 5 13 –+ OUTPUT LEVEL SKIP STOP PAUSE PLAY 1 12, 13 1 Stop the unit. 9 Follow step 5 and 6. STOP 10 Repeat step 5 and 6 to program more tracks for side B of the tape. You can select the same track again. 2 If you will select trac
Resumen del contenido incluido en la página 20
Display information during programming Shows the side of the tape and the program number for the track to be programmed next. Shows the selected disc and track number. ` PROG Shows the total remaining time on the side of the tape. ´ Programmed track numbers light up and programmable TOTAL ˆ REMAIN track numbers among the unprogrammed ones flash on 1 2 3 4 5 6 7 8 9 10 and off. * If “A-01” does not appear on the display after the PROG button is pressed, press the TIME display mode-
