Resumen del contenido incluido en la página 1
CDP-50
Operation Manual
CD-Player
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
CONTENTS ACCESSORIES OPERATION AND FUNCTIONS ON, OFF and standby 13 Accessories 01 Load a disc 13 Play 13 CONTENTS Pause 14 Stop/Clear 14 Contents 02 Previous and next 14 Forward and rewind 15 SAFETY PRECAUTIONS Random 15 Program 16 Safety precautions 03 Repeat 16 IMPORTANT SAFETY INSTRUCTIONS TROUBLESHOOTING Troubleshooting 17 Important safety instructions 04 IMPORTANT INFORMATION TECHNICAL DATA Important information 06 Technical data 18 CONNECTION Connection to the main
Resumen del contenido incluido en la página 4
SAFETY PRECAUTIONS A triangle with a lightning symbol draws the user's attention to "dangerous voltage" without insulation in the cabinet which may be high enough to entail a risk of electric shock. A triangle with an exclamation mark draws the user's attention to important instructions for use and maintenance in the accompanying manual, which should be studied. A symbol for CLASS II (double insulation) TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE WARNING: THE UNIT TO RAI
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS WARNING: IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT. KEEP THIS MANUAL FOR FUTURE REFERENCE. This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit may cause electrical shock or fire. The protection devices built into this unit will protect the user if the procedures below are observed in connection with installation, use and repair
Resumen del contenido incluido en la página 6
IMPORTANT SAFETY INSTRUCTIONS Lightning Damage Unplug the unit for additional Unplug the unit and contact qualified technicians in protection during thunder or when the following cases: the unit is not used for prolonged A) If the power cord or the plug is damaged. periods. This will prevent damage B) If liquid has been spilled on the unit or objects to the unit from lightning and have fallen into the unit. power surges. C) If the unit has been exposed to rain or water. D) If the unit doe
Resumen del contenido incluido en la página 7
IMPORTANT INFORMATION Handling instructions Condensation Condensation may occur in the following cases: The top and back panel of the unit may become warm after prolonged use. This is not due to a When the unit is moved directly from a cold to a defect. warm place. Turn off the power when the unit is not used. When the unit is used in a room where the radiator has just been switched on or a place where the cold air from the air-conditioning system is directed at the unit. Protect the
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
Resumen del contenido incluido en la página 10
Resumen del contenido incluido en la página 11
Resumen del contenido incluido en la página 12
FRONT PANEL AND CONNECTIONS Connections 1 2 3 1 Stereo Output: Analogue stereo output. For connection to stereo amplifier or receiver with analogue input. 2 Optical Output: Optical SPDIF output. For connection to stereo amplifier or receiver with digital input. 3 AC input: For connection of mains voltage. Make sure that the plug has been correctly inserted, and that the voltage corresponds to the text printed on the back panel of the cabinet. Explanation of LCD display This unit does not fea
Resumen del contenido incluido en la página 13
Resumen del contenido incluido en la página 14
OPERATION AND FUNCTIONS On, Off and standby 1 Turn on the unit by pressing the mains switch. 2 Press the standby button on the remote control to switch to standby mode. The display will turn off and all functions will be reduced to a 2 minimum to make sure that the unit uses minimal power. When in standby mode the unit only reacts to the standby button of the remote control. 3 If you wish to turn off the unit to avoid any power consumption, you must press the mains switch. POWER 1 PHONO 3
Resumen del contenido incluido en la página 15
OPERATION AND FUNCTIONS Pause Press the PLAY/PAUSE button once more to stop playback. The small play symbol will disappear, and a small pause symbol will be displayed 4- 0:38 instead. To continue playback, press the PLAY/PAUSE button again. Stop/Clear To stop playback completely, press the STOP button once. The display will again display the number of tracks on the disc and the total playback time. 15-58:34 To delete all previous programming settings you must press the STOP button o
Resumen del contenido incluido en la página 16
OPERATION AND FUNCTIONS Forward and rewind It is possible to perform a search in the track played. If you wish to search forward, depress the >> (next) button until you get to that part of the track that you wish to hear. You will see that the time counter in the display counts up very quickly. If you wish to search backward, use the same procedure as when you search forward, but use the << (Previous) button 5- 2:35 instead. Note: The search speed will increase the longer you depr
Resumen del contenido incluido en la página 17
OPERATION AND FUNCTIONS Program The CDP-50 can be programmed to play the tracks of a CD in a certain order. Press the PROGRAM button when playback has been stopped. The MEMORY symbol and "Pr p:01" will be displayed. Use << and >> to select the track that you wish to include in the programming and confirm your choice by pressing the PROGRAM button again. This procedure must be repeated until you have selected all the tracks that you wish to hear. The tracks that have been selected a
Resumen del contenido incluido en la página 18
TROUBLESHOOTING Troubleshooting PROBLEM CAUSE/REMEDY No power when unit is turned on. - Switch on the electric current at the socket. - Check that the plug has been correctly inserted into the socket. - The internal fuse has blown and must be replaced by a qualified service technician. - The power cord has been damaged and must be replaced. No sound. - The unit has not been turned on. - Incorrect connection to the amplifier. - No loudspeakers
Resumen del contenido incluido en la página 19
TECHNICAL DATA Technical data Output voltage 0.7V+/-2dB Frequency characteristics (Reference: 1kHz 0dB) 20 Hz 0dB -0.5 dB +/- 1 dB 100 Hz 0dB 0 dB +/- 1 dB 10 kHz 0dB -0.5 dB +/- 2 dB 20 kHz 0dB -3.0 dB +/- 2 dB Channel balance < 2.0 dB Separation > 60 dB Harmonious distortion (T H D + noise) < 0.05% Signal/noise ratio > 990 dB Voltage and power consumption See back panel Dimensions (WxDxH) 430 x 290 x 75 mm Weight 4.3Kg We reserve the right to change the technical data and the design
Resumen del contenido incluido en la página 20
www.tangent-audio.com
