Resumen del contenido incluido en la página 1
D00864010A
»
CD-01U/CD-01UPro
CD PLAYER
OWNER’S MANUAL
˛
Resumen del contenido incluido en la página 2
O Important Safety Precautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the prod- uct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equi
Resumen del contenido incluido en la página 3
O Important Safety Instructions 1 Read these instructions. • Do not expose this apparatus to drips or splashes. •Do not place any objects filled with liquids, such as 2 Keep these instructions. vases, on the apparatus. 3 Heed all warnings. • Do not install this apparatus in a confined space such as 4 Follow all instructions. a book case or similar unit. 5 Do not use this apparatus near water. • The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off po
Resumen del contenido incluido en la página 4
O Safety Information Safety Information This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is com- pletely confined in the protective housings. The label required in this regulation is shown
Resumen del contenido incluido en la página 5
Table of contents 1 - Introduction 7 - Advanced operations Auto Cue ......................................................18 Supplied accessories ..................................6 Auto Ready .................................................18 Environmental considerations .....................6 Resume .........................................................18 Some notes and precautions ..........................6 Call ....................................................................18 Bewar
Resumen del contenido incluido en la página 6
ΠΠ1 - Introduction Environmental considerations Thank you for your purchase of the TASCAM CD- CD-01U/CD-01U Pro, as well as the operation of its 01U/CD-01U Pro CD player. many useful and convenient functions. After you have Before connecting and using the unit, please take time finished reading this manual, please keep it in a safe to read this manual thoroughly to ensure you under- place for future reference. stand how to properly set up and connect the Supplied accessories In addition to t
Resumen del contenido incluido en la página 7
1 - Introduction ΠΠEnvironmental considerations Rack-mounting the unit Use the rack-mounting kit to mount the unit in a standard 19-inch equipment rack, as shown below. Remove the feet of the unit before mounting. If you are mounting the unit in a rack, leave 1U of space above it and 10cm (4 in) or more of space at the rear. The CD-01U/CD-01U Pro can be mounted in any angle between 0 to 90 degrees. SeeEnvironmental considerationson the previous page. Handling of compact discs The CD-01U/CD-0
Resumen del contenido incluido en la página 8
2 - Remote control unit Some notes and precautions Batteries ≠ When the remote control will not be used for an If batteries are used improperly, or if leakage or break- extended period of time, please remove the batteries age occurs, the unit will not function. to prevent the possibility of battery acid leakage Please observe the cautions indicated on the batteries which could damage the unit. and their packaging to ensure proper usage. Should leakage occur, remove and discard the bat- teries,
Resumen del contenido incluido en la página 9
3 - Connections Before connecting the CD-01U/CD-01U Pro to other units, please read their operation manuals thoroughly to ensure proper connection. Turn the power on only after all connections have been made. Audio equipment Connecting analog audio equipment Connecting digital audio equipment Connect analog stereo amplifiers, mixers and recorders Digital stereo amplifiers, mixers and recorders can be to the analog line outputs. connected through the optical digital output terminal. Power source
Resumen del contenido incluido en la página 10
4 - Features and their functions Front panel 1 POWER switch 0 DISPLY key 2 Disc slot Pressing this key changes the time mode on the dis- play. Even when the power is turned off, the time Insert CD into the slot, label side upwards. mode is retained. 3 Remote signal sensor When in menu mode, exits the menu mode. 4 EJECT key q SHIFT key and indicator Ejects a disc. This key cannot be used when Eject Turns the shift mode on and off. When in shift mode, Block is on and disc is being played back. the
Resumen del contenido incluido en la página 11
4 - Features and their functions Display 1TRACK indicator 8 REPEAT indicators 2 Track number display Indicates the current repeat mode. Shows the track number. In the menu mode, shows 9 PITCH indicator and pitch value display the menu number. When pitch control is activated, shows the pitch 3 MP3 indicator value and PITCH indicator lights. Lights when a MP3 CD-ROM disc is inserted. In the menu mode, shows the menu parameters. 4 INDEX/DIR indicator 0 A.CUE indicator Shows the index number (CD-DA
Resumen del contenido incluido en la página 12
4 - Features and their functions Rear panel 1 ANALOG OUTPUT terminals 5ANALOG OUTPUT (BALANCED) terminals (CD- 01U Pro only) The analog line output terminals are for RCA pin jacks. The maximum output level is +6 dBV. The analog line output terminals are for XLR connectors. The maximum output level is +20 dBu. 2 DIGITAL (OPTICAL) OUTPUT terminal 6DIGITAL (AES/EBU) OUTPUT terminal (CD-01U Provides the digital audio signal in S/PDIF format. Pro only) This connector outputs the 44.1KHz digital signa
Resumen del contenido incluido en la página 13
4 - Features and their functions 5 PITCH key +/- keys o SEARCH keys Use these keys to perform the pitch control function. During playback or playback standby, press the key continuously for review or cue playback (search). 6 KEY ORIG key p INDEX/DIR SEARCH key This turns the Key Original function on and off. Use this key to select the index (Audio CDs) or 7 A.CUE/DEL key directory (MP3 discs). Sets the Auto Cue level. a JOG +/- keys During program input, the selected program number track is del
Resumen del contenido incluido en la página 14
5 - Menu operation The various settings and editing operations possible menu setting options, some may be made directly using with the CD-01U/CD-01U Pro are performed through the keys on the remote control. menu options shown on the display. Among the many No. Menu Function Parameter Manual reference Page Underlined values are fac- tory default settings 01 KEY-0 Key Original ON, OFF Key Original 21 02 BLOCK Eject Block ON, OFF Eject Block 23 03 REPEAT Repeat Playback OFF, ON, A-B Repeat Playback
Resumen del contenido incluido en la página 15
6 - Playback Discs for playback The CD-01U/ CD-01U Pro can playback the types of ≠ MP3 files recorded in ISO9660 format on CD-R and CD-RW discs, and properly finalized. discs listed below. ≠ CD-R/RW discs that have not been finalized cannot ≠ Ordinary audio CDs available commercially (recorded be played back. Make sure the disc has been prop- in CD-DA format). erly finalized before loading into the player. ≠ CD-R and CD-RW discs recorded in CD-DA format, and properly finalized. About finalizatio
Resumen del contenido incluido en la página 16
6 - Playback Playback modes There are four different playback modes. The mode changes the playback mode in the following order: selected is indicated on the display. Cont ∑ Single ∑ Program ∑ Random Normal (continuous) playback mode: no indication lamp You can also select the playback mode pressing the Single playback mode: S is lit CALL/PLAY MODE key on the front panel when in Program playback mode: PGM is lit SHIFT mode. Random playback mode: RANDOM is lit While the mode can be changed from a
Resumen del contenido incluido en la página 17
6 - Playback Selecting by track number Frame search Using the number keys on the remote control, the num- During playback standby, using the PITCH knob in shift ber of the desired track can be entered directly. mode performs the frame accurate search. Even numbers with two (Audio CD) or three (MP3) digits Also, during playback standby, pressing the JOG +/- can be entered easily. keys on the remote control performs the frame search. For example: Track 9 (Audio CD): press 0 then press 9. This func
Resumen del contenido incluido en la página 18
7 - Advanced operations Auto Cue When the Auto Cue function is turned on and a track is Turning the Auto Cue function on and off selected, the point where sound begins (not where the Press the µ key on the front panel when SHIFT indi- track begins) on that track is located to and the unit cator is lit or A.CUE/DEL key on the remote control to enters pause mode. select the auto cue level. When the ¥ key is pressed, playback begins at exactly that point. Auto cue level: OFF (default), -24, -30, -3
Resumen del contenido incluido en la página 19
7 - Advanced operations Incremental play Turning the Incremental play function on and off This function allows auto-cueing of the playback point to the start of the next track when the ª key on either Set the incremental play function on and off on the the front panel or remote control is pressed, or a stop menu (menu number 11 INCR). command is received from the external device. Pressing the ª key again or receiving the stop com- mand again, unit enters stop mode. When the this function is on,
Resumen del contenido incluido en la página 20
7 - Advanced operations Intro Check The Intro Check function allows only the beginning of each track to be played for 10 seconds. This function works in normal (continuous) play mode This function is operational both at stop and during nor- and program play mode. mal playback. To exit the intro check mode, press ª key on either the 1 Press the STOP/INTRO CHECK key on the front front panel or remote control, or INTRO CHECK key on panel when SHIFT indicator is lit and playback stops. the remote co
