Resumen del contenido incluido en la página 1
AXIS 2 CD Player with ANTI-SHOCK™
MANUAL
©2001 Industries http://www.numark.com
Resumen del contenido incluido en la página 2
AXIS 2 SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference. c) Heed Warnings - All warnings on this product and in these operating CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK instructions should be followed. DO NOT REMOVE ANY COVER. NO USER- d) Follow Instructions - All operating and other instructions sho
Resumen del contenido incluido en la página 3
AXIS 2 ® AXIS 2 AXIS 2 AXIS 2 AXIS 2 PROFESSIONAL TABLETOP PROFESSIONAL TABLETOP PROFESSIONAL TABLETOP PROFESSIONAL TABLETOP CD PLAYER CD PLAYER CD PLAYER CD PLAYER CONGRATULATIONS... You have just purchased a CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the AXIS 2 by reading the following information before
Resumen del contenido incluido en la página 4
AXIS 2 TABLE OF CONTENTS Safety Instructions 2 Introduction and Registration 3 Set-up & Connections 5 Description of the Features Top Panel 6 Front Panel 8 Rear Panel 8 Display 9 Basic Operation Play, Pause and Cue Operations 10 Matching the Tempo 11 Beat Matching Using Pitch Bend 11 Relay and Fader Start 12 Example of Mixing 13 Before Switching off the Power 14 Troubleshooting Guide 14 Information and Specifications 15 Warranty 16 - The Leader in DJ Technology ©2001 Numark Industries - 4 - http
Resumen del contenido incluido en la página 5
AXIS 2 SETUP and CONNECTIONS Typical connection with a mixer is illustrated below. 1. Find a level surface free of excessive vibration to place your equipment 2. Connect the line output connections using the supplied audio cable from the CD Player to the line inputs of your mixer. 3. Connect Fader start cable. Attach your CD play to a similarly equipped DJ mixer. (This connection can also be used with a remote switch) 4. If setting up 2 units, you can connect a relay cable between the units. (T
Resumen del contenido incluido en la página 6
AXIS 2 TOP PANEL FEATURES - The Leader in DJ Technology ©2001 Numark Industries - 6 - http://www.numark.com
Resumen del contenido incluido en la página 7
AXIS 2 1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatic close in 30 seconds if left open. This is to protect the tray from accidental damage while open 2. Single: toggles the unit to play back just one track at a time (single) or play continuously through all tracks and then start over repeating the CD infinitely (continuous). 3. Time: switches the time modes on the display between elapsed playing time, remaining time on
Resumen del contenido incluido en la página 8
AXIS 2 FRONT PANEL 16. CD Illumination Light – lights up the CD drawer and CD when open. 17. CD Drawer – Place your CDs you wish to play in here. This unit is designed to play commercially available CD and properly burned and finalized CDR and CDRW formats. Due to variances on the specification of certain CD burners and CDs some discs home made CDs may not play properly. REAR PANEL 18. Power Switch- Turn on and turn off the machine with this button. The unit should always be shut down with th
Resumen del contenido incluido en la página 9
AXIS 2 DISPLAY FEATURES 1. CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point. 2. PAUSE (II)- Active when the unit is paused. 3. PLAY (>)- Active while the unit is actually playing a CD. 4. TRACK - Shows the track that the unit is playing. 5. TOTAL – indicates when total CD remaining tracks are displayed. 6. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. 7. SECONDS - Shows the seconds elapsed or remaining depe
Resumen del contenido incluido en la página 10
AXIS 2 DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS PLAY and CUE Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the “CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back cue. PLAY, PAUSE and CUE When Play is paused and then started again, the return
Resumen del contenido incluido en la página 11
AXIS 2 RELAY PLAY This mode will be operational only when 2 units are connected via the supplied relay cable. 1. Insert CDs into both of the units. 2. Press the “RELAY” button on both units to activate. 3. We recommend putting both sides in SINGLE play mode while learning this function. 4. Press play on the first unit. When that unit has finished play it will send a signal to the second unit to start play. You will see the second unit start play and the first unit pause and cue to the beginnin
Resumen del contenido incluido en la página 12
AXIS 2 MATCHING THE BEATS PER MINUTE (BPM) Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+” side and match the tempo. When faster, move the pitch slider to the “-“ side. The following description is for the case of matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1. Press PLAY/PAUSE
Resumen del contenido incluido en la página 13
AXIS 2 EXAMPLE OF MIXING USING TWO CD PLAYERS While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2. PLAYER 1 PLAYER 1 PLAYER 1 Load a disc in PLAYER 1 and select the track and press PLAY. Load a disc and press the Select the track to be Press the PLAY button OPEN/CLOSE button. played. PLAYER 2 PLAYER 2 PLAYER 2 Load a disc in
Resumen del contenido incluido en la página 14
AXIS 2 BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power. Switch off the power after the DO NOT switch off the power when disc holder has been closed the disc holder is open. with the “OPEN/CLOSE” button TROUBLESHOOTING: Symptom Possible Cause Corrective Action The power fails to switch on when the Poor power plug connection at the AC Insert the power plug firmly into the AC
Resumen del contenido incluido en la página 15
AXIS 2 SPECIFICATIONS TECHNICAL Disc Type Standard Compact discs (12 cm & 8 cm) Time Display Track Elapsed, Track Remain, or Total remain Quantization 1 bit linear/Channel, 3 Beam Laser Oversampling rate 8 Times Sampling Frequency 44.1 kHz Frequency response 20 Hz to 20 kHz T.H.D. + NOISE Less Than 0.005% S/N ratio (IHF-A) > 96 dB Dynamic range > 94 dB Output level 1.9 Volts R.M.S. Start Time within 0.03 seconds Pitch control range +/- 8 and 16% slider Pitch bend +/-16% rotary and buttons Digita
Resumen del contenido incluido en la página 16
® Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing fo
