Resumen del contenido incluido en la página 1
COMPACT DISC PLAYER
WITH AM/FM STEREO CASSETTE RECORDER
MODEL CD-2036
OPERATING INSTRUCTIONS
PLAYS ALL MUSIC COMPACT DISCS, CD-R & CD-RW
•
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
•
RECEIVES AM/FM STEREO BROADCASTS
•
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE
•
2 WAY POWER - AC/DC
•
USES 6 SIZE “D” BATTERIES (not included)
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD2036(SY)-WM-E-010805
IB-CD2036(SY)-WM-E-010805.PMD 1 2/23/2005, 2:38 PM
Resumen del contenido incluido en la página 2
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with The exclamation point within WARNING: TO REDUCE THE arrowhead symbol, within a
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS 15. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 16. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk
Resumen del contenido incluido en la página 4
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries. Release
Resumen del contenido incluido en la página 5
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet BATTERY DOOR NOTE: One blade of plug (on the bottom of the set) and outlet is wider. TIP 1. Connecting the AC power If the plug of the AC power • Insert one end of the supplied AC power cord into cord does not match your the socket located at the rear of the set, and the outlet, do not force it. other end into the 120V, 60Hz standard household Reverse it and try again. outlet. The plug is polar
Resumen del contenido incluido en la página 6
PLAYING A CD Lift here to open the FUNCTION CD door switch (at the left side of the set) PLAY/PAUSE button Connect the supplied AC power cord or batteries (refer to page 4). Slide the FUNCTION 1 REPEAT switch to CD position FUNCTION POWER TAPE/OFF RADIO CD (power on), the POWER PROG. FM ST. lamp will be on, the display PLAY/ PAUSE will show 2 dashes “ ” flashing, then “ ”. Lift the either side of the 2 CD DOOR to open it and place a CD in the CD compartment. The label side of the CD should fac
Resumen del contenido incluido en la página 7
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS Lift here to open the VOLUME CD door scale VOLUME control PHONES jack REPEAT POWER PROG. FM ST. PLAY/ PAUSE STOP button SKIP/SEARCH PLAY/PAUSE buttons button TIP Press or Adjust To When CD play is Adjust the volume • VOLUME control paused, the PLAY/ PAUSE lamp will flash Stop playback STOP button and no music will play. PLAY/PAUSE button To resume play, press • The PLAY/PAUSE lamp will the PLAY/PAUSE Pause playback flash during pause. Press
Resumen del contenido incluido en la página 8
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play mode (refer to page 8). FUNCTION switch SKIP/SEARCH buttons REPEAT button PLAY/PAUSE button 1. Slide the FUNCTION switch to CD position, the POWER lamp will be steadily on. 2. Select the track by pressing or , and then press . 3. Press the REPEAT button. To repeat Press Display shows REPEAT POWER Press the REPEAT button PROG. A single track (song) once, the REPEAT lamp
Resumen del contenido incluido en la página 9
PLAYING CD TRACKS IN PROGRAMMED ORDER You can make a program of up to 20 tracks in the order you want them to be played. REPEAT POWER PROG. PLAY/ PLAY FM ST. STOP PAUSE PAUSE PROGRAM REPEAT STOP button SKIP/SEARCH PLAY/PAUSE button PROGRAM button REPEAT button SKIP/SEARCH buttons 1. Slide the FUNCTION switch to CD position. Make sure the CD is stopped. REPEAT POWER 2. Press the PROGRAM button. The letters “ ” PROG. and the PROG. lamp will flash. FM ST. PLAY/ PAUSE or to select the track you w
Resumen del contenido incluido en la página 10
LISTENING TO THE RADIO AM/FM dial scale FUNCTION TUNING switch control BAND FM ST. lamp switch (FM STEREO) Connect the supplied AC power cord or batteries (refer to page 4). FUNCTION Slide the FUNCTION switch to TAPE/OFF 1 RADIO CD RADIO position, the POWER lamp will turn on. BAND FM Slide the BAND switch to the FM ST. AM 2 proper band position (AM, FM, or FM ST.) that you want. Tune into the station you prefer 3 using the TUNING control. Adjust for the clearest sound. TUNING REPEAT The FM ster
Resumen del contenido incluido en la página 11
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FUNCTION switch FM antenna (at the left side of the set) VOLUME control TIP To Slide or Adjust If the FM broadcast is • noisy, slide the BAND Adjust the volume VOLUME control switch from FM Stereo to FM. Slide the FUNCTION Turn off the Radio Next time you want to switch to TAPE/OFF • listen to the radio, just position slide the FUNCTION switch to RADIO To improve broadcast reception position. The set Change position of the antenna for FM or FM Stereo.
Resumen del contenido incluido en la página 12
PLAYING A TAPE STOP/EJECT button FUNCTION switch PLAY button (at the left side of the set) Connect the supplied AC power cord or batteries (refer to page 4). TAPE PLAY DIRECTION 1 Slide the FUNCTION switch to TAPE/OFF FUNCTION TAPE/OFF RADIO CD position. A EMPTY FULL REEL REEL Press the STOP/ 2 STOP/EJECT EJECT button to open INSERT TAPE THIS WAY FULL REEL ON RIGHT the tape compartment and insert a recorded tape, then close the door. PLAY Press the PLAY button, 3 the player turns on and starts
Resumen del contenido incluido en la página 13
RECORDING ON A TAPE STOP/EJECT F.FWD REWIND button button button FUNCTION switch PLAY button (at the left side of the set) RECORD button Built-in microphone Connect the supplied AC power cord or batteries (refer to page 4). Press the STOP/EJECT button to STOP/EJECT 1 open the tape compartment and TAPE PLAY DIRECTION insert a blank tape. Select the program source (AM, FM, CD, or built-in microphone) you want to A record. EMPTY FULL REEL REEL To record from the CD player. Slide FUNCTION TAPE/OFF 2
Resumen del contenido incluido en la página 14
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS STOP/EJECT F.FWD REWIND button PAUSE button button button FUNCTION switch PLAY button (at the left side of the set) RECORD button VOLUME control PHONES JACK Connect the supplied AC power cord or batteries (refer to page 4). To Press or Adjust Adjust the volume VOLUME control Stop playback or recording STOP/EJECT button Fast forward or rewind the tape FAST FORWARD or REWIND button PAUSE button Pause playback or recording Press again to resume play or re
Resumen del contenido incluido en la página 15
PRECAUTIONS On Safety On Operation As the laser beam used in the CD player • If the player is brought directly from a • section may be harmful to the eyes, do cold to a warm location, or is placed in a not attempt to disassemble the cabinet. very damp room, moisture may condense Refer servicing to qualified personnel on the lens inside the CD player section. only. Should this occur, the player will not operate properly. In this case, remove Should any solid object or liquid fall into • the CD an
Resumen del contenido incluido en la página 16
Notes on Cassettes Cleaning the Tape Head Wipe the tape head, the pinch roller and Break off the cassette tab from side A or • the capstan with a cleaning swab slightly B to prevent accidental recording. moistened with cleaning fluid or alcohol Side A after every 10 hours of operation for optimum playback and recording quality. After cleaning, insert a tape when the areas cleaned are completely dry. R ECO R D /PL AY BA CK HE AD Tab for side A P IN CH R O LLER ERA S E HE AD Tab for side B To re
Resumen del contenido incluido en la página 17
TROUBLE SHOOTING Problem Remedy Insert the AC plug into a wall outlet securely. • The power is not on. Make sure the batteries are installed correctly and they • are fresh. Make sure the FUNCTION switch is at the right position • as you want. Adjust the volume. There is no sound. • Unplug the headphones when listening through • speakers. “ ” appears in the display Insert the CD with the label side up. • even when a CD is in place. Make sure that the CD compartment is closed. • Clean the CD. • Re
Resumen del contenido incluido en la página 18
SPECIFICATION General Description AC 120V, 60Hz, Power source: DC 9V (6 size “D” batteries, not included) (Alkaline batteries are recommended) Output power: 1.5W/channel 1 Dimensions: Width: 15 / ” 2 1 Depth: 9 / ” 8 3 Height: 6 / ” 8 Weight: 4.4 lbs (without batteries) CD Section Plays disc type: Any normal music CD used in portable players, including CD-R & CD-RW. Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens Frequency response: 50Hz - 15kHz +
