Resumen del contenido incluido en la página 1
CD-RECEIVER
KDC-BT8041U
KDC-BT8141U
INSTRUCTION MANUAL
© B64-4160-00/00 (EW/ E2W)
Resumen del contenido incluido en la página 2
Contents Before use 3 Audio Adjustments 22 Audio Control Basic Operation 4 Adjusting the detail of Audio Control General functions Audio Setup Tuner functions Speaker Setting Disc & Audio file play functions Audio Preset Memory Audio Preset Recall Function Control 6 Bluetooth Setup 25 ⁄ • Read through this page first for the setting of each Registering Bluetooth device function. Registering Special Bluetooth device Registering PIN Code Display Settings 9 Downloading the Phone Book Disc Naming
Resumen del contenido incluido en la página 3
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to ISO 8859-1 can be the unit. displayed. • Characters that confor
Resumen del contenido incluido en la página 4
Basic Operation [SRC] [ATT] [TI] [ ] [FNC] Release Disc slot AUX Auxiliary input Control knob [AUD] (Rear side) USB Terminal General functions Faceplate release Release Releases the faceplate lock so that it can be removed. Power/Source Select button [SRC] Refer to the following diagram when reattaching the Turns on the power. faceplate. When the power is ON, select a source. SRC Select mode 1: Press the [SRC] button and then turn the Control knob or push it toward left or right. To dete
Resumen del contenido incluido en la página 5
, : Indicates the button etc. to operate. Disc & Audio file play functions Subwoofer output Control knob Switches between ON (“SUBWOOFER ON”) and OFF Disc play Disc slot (“SUBWOOFER OFF”) each time pushing toward down for at least 2 seconds. Starts playing when a disc is inserted. When a CD is inserted, the “IN” indicator is ON. ⁄ • This function requires the setting made in “MENU” > “SWPRE” ⁄ of (page 6). • 3 inch (8 cm) CD cannot be used. Attempt to insert using an a
Resumen del contenido incluido en la página 6
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets security code MENU “Security Set” 1 sec. 20 “SRC Select” “1”*/ “2” Sets the source selection method. 34 When set to “ON”, allows you to select music in the manner “iPod Mode” “OFF”/ “ON”* 12 similar to that of the iPod. Register a Bluetooth device (pairing). “Device Regist” 1 sec. 25 Allow registration of a special device that cannot be “SPC
Resumen del contenido incluido en la página 7
Category Item Setting Entry Setting overview Condition Page Sets whether to switch to the station only in the specific “Regional” “OFF”/ “ON”* region using the “AF” control. “Auto TP Seek” “OFF”/ “ON”* When traffic information station reception is poor, automatically searches for a station that can be received better. “MONO” “OFF”*/ “ON” You can reduce the noise when stereo broadcasts are received as monaural. Sets the disc name (DNPS)/ AUX name. “Name Set” 1 sec. 9 1 “Russian”* “OFF”/ “ON”
Resumen del contenido incluido en la página 8
Function Control *Factory setting 1 Enter Function Control mode * Function of KDC-BT8141U. Press the [FNC] button. * Function of KDC-BT8041U. Function icon is displayed. Displayed item is depending on currently selected source or mode. The mark in Condition column 2 Select your desired setup item shows the condition to which the item is displayed. Operation type Operation : Can be set in other than standby state. Movement between items Turn the Control knob. : Can be set in standby state.
Resumen del contenido incluido en la página 9
Display Settings Disc Naming (DNPS) Auxiliary Input Display Setting Attaching a title to a CD. Selects the display below when changing to Auxiliary input source. 1 Play the disc you want to attach a name to 1 Select Auxiliary input display setting item 2 Select Name set mode item during Menu during Menu mode (In AUX mode) mode Select the “Name Set” display. Select the “Name Set” display. For how to select Function Control items, refer to For how to select Function Control items, refer to <
Resumen del contenido incluido en la página 10
Display Settings About Display Type Text Display Selection Shown below are examples of display types. Changing the text display. Display Display Type In Tuner source “TYPE [A]” 3 1 Information Display 1 Program Service name (FM) “Frequency/PS” 1 Title & Artist name* (FM) “Title/Artist” “TYPE [B]” 1 Station name* (FM) “Station Name” 1 Radio text plus* (FM) “Radio Text Plus” 1 Radio text (FM) “Radio Text” “TYPE [C]” 2 Frequency (MW, LW) “Frequency” 3 1 Spectrum Analyzer & Clock “Speana/Clock” 1 Cl
Resumen del contenido incluido en la página 11
In Auxiliary input source Information Display Auxiliary input name “Source Name” Spectrum Analyzer & Clock “Speana/Clock” Clock “Clock” Date “Date” Blank “Blank” In Bluetooth audio source Information Display Bluetooth audio “Source Name” Spectrum Analyzer & Clock “Speana/Clock” Clock “Clock” Date “Date” Blank “Blank” 1 Enter Text Display Selection mode (In Display Type A/ B/ C/ D/ F) Select “DISP” > “TEXT” . For how to select Function Control item, refer to (page 6). 2 Sele
Resumen del contenido incluido en la página 12
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca
Resumen del contenido incluido en la página 13
Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre
Resumen del contenido incluido en la página 14
Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching Putting the Program Type in the Preset button for a station; memory and quick recall. Program Type Display Program Type Display Presetting the Program Type Speech “All Speech” Weather “Weather & 1 Select the Program Type to preset Metr” Music “All Music” Refer to (page 14). Finance “Finance” News “News” Children’s “Children's Current Affairs “Current Affairs” 2 Enter Prog
Resumen del contenido incluido en la página 15
Changing Language for PTY Function Selecting the Program Type display language as follows; Language Display Language Display English “English” Norwegian “Norwegian” Spanish “Spanish” Portuguese “Portuguese” French “French” Swedish “Swedish” Dutch “Dutch” German “German” 1 Enter PTY mode Refer to (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Turn the Control knob or push it towards up or down. 4 Exit Changing Language mode Press the
Resumen del contenido incluido en la página 16
Operation of hands-free phoning Before Use Call waiting • For details on the Bluetooth cell-phone with the Answering Another Incoming Call with the hands-free function, see Current Call Suspended (page 33). 1 Press the [AUD] knob. • You need to register your cell-phone before using it with this unit. For more details, see (page 25). or down. Select the “Answer” display. • If you have registe
Resumen del contenido incluido en la página 17
Making a call 6 Press the [FNC] button. 7 Make a call 1 Enter dialing method mode Press the Control knob for at least 1 second. Press the [ATT] button for at least 1 second. ⁄ 2 Select a dialing method • You need to register the preset dial number. (page 18) Press the Control knob. "DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" » "IN- CALL" » "MIS-CALL" Methods of operations in the above modes are Calling a number in the Phone Book described below. 1 Enter dialing method mode 3 Exit the dialing met
Resumen del contenido incluido en la página 18
Operation of hands-free phoning Calling a number in the call log Registering to the Preset Dial Number List 1 Enter dialing method mode Press the [ATT] button for at least 1 second. 1 Enter the phone number you wish to register Enter the phone number with reference to the 2 Select the call log mode following: Press the Control knob. Dial a number/ Calling a number in the call log/ Select the "OUT-CALL" (outgoing call), "IN-CALL" Calling a number in the Phone Book (incoming call), or "MIS-CAL
Resumen del contenido incluido en la página 19
Bluetooth Audio Operation Before Use • For details on the Bluetooth Audio player which can be connected, see (page 33). • You need to register your Bluetooth Audio player before using it with this unit. For more details, see (page 25). • You to select the Bluetooth audio player you wish to connect. Refer to (page 27). Basic Operation Selecting Bluetooth Audio source Press
Resumen del contenido incluido en la página 20
Other Functions Entering Security Code Security Code The Security Code is required to use the audio unit When Security Code is set, possibility of theft when the unit is first used after removed from the is reduced because input of Security Code is battery power source or the Reset button is pressed. prompted to turn on the unit once it is turned off. 1 Turn the power ON. ⁄ 2 Do the step 3 through 4 operation, and reenter • When you activate the Security Code function, it cannot be the sec
