Manual de instrucciones de 3Com Phaser 7750

Resumen del contenido incluido en la página 1

Phaser® 7750 Color Laser Printer
Novell NetWare
This topic includes:
■ "Configuration Software for NetWare Networks" on page 3-38
■ "Quick Setup" on page 3-38
■ "Advanced Setup" on page 3-38
■ "NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup" on page 3-39
■ "Novell NetWare Troubleshooting" on page 3-39
Configuration Software for NetWare Networks
CentreWare DP configures the printer and the network when using NetWare 4.x, 5.x, and 6.x.
CentreWare DP is a Novell Directory Service (ND

Resumen del contenido incluido en la página 2

Novell NetWare NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup The Phaser printer defaults enable connection to Novell NetWare without adjustment. Review the “Configuration Page” and verify the following settings: ■ NetWare is enabled ■ Frame Type matches the frame type of the desired file server ■ PDL is set to your desired PDL (PostScript or PCL) or to Auto. You may wish to set PDL to the desired type if only one PDL is used ■ Desired Novell mode is set to either NDS/BEM, NDS, o

Resumen del contenido incluido en la página 3

Novell NetWare Requirements Verify that you: ■ Are operating a Windows-based system with CentreWare DP software installed and at least one printer driver installed ■ Are a NetWare Network Administrator, an administrative person with ADMIN/ SUPERVISOR, or ADMIN/SUPERVISOR EQUIVALENT within login rights to the NetWare Server(s) servicing the Phaser printer ■ Have a basic knowledge of NetWare Novell NetWare Troubleshooting Quick Check 1. Verify that the printer is plugged in, turned on, and conne

Resumen del contenido incluido en la página 4

Novell NetWare Novell NetWare Troubleshooting Step-By-Step These procedures eliminate cabling, communication, and connection problems associated with network connected printers. The steps are divided into two groups: ■ Novell NetWare Hardware Step-by-Step ■ Novell NetWare Software Step-by-Step Note Novell NetWare Software Step-by-Step assumes that you are connected to a Novell NetWare network with a Windows OS installed on the client workstation. When both of these procedures are completed, p

Resumen del contenido incluido en la página 5

Novell NetWare Novell NetWare Software Step-By-Step 1. Verify that CentreWare DP and a Phaser printer driver have been loaded on the workstation. 2. Click Start, click Settings, then click Printers to verify that the printer is installed. Launching CentreWare DP 1. Click Start, click Programs, then click CentreWare DP. 2. Select the desired printer. If a communications error message appears, your printer is not able to communicate with your workstation. Verify your printer’s settings, then ret