Resumen del contenido incluido en la página 1
CD-RECEIVER
DPX-MP2090U
INSTRUCTION MANUAL
© B64-3433-00/00 (MW)
Resumen del contenido incluido en la página 2
Contents Select mode Safety precautions 3 File Select mode Folder Select 1 mode Notes 4 Folder Select 2 mode Switching the Play mode About CDs 6 Letter Seek About USB device 7 Text/Title Scroll Menu system 25 About AAC, MP3 and WMA 8 Menu System General features 10 Activating Security Code Deactivating Security Code Power Touch Sensor Tone Selecting the Source Manual Clock Adjustment Volume Indirect Lighting Attenuator Display Illumination Control System Q Dimmer Audio Control Switching preout A
Resumen del contenido incluido en la página 3
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Mounting and wiring this product req
Resumen del contenido incluido en la página 4
Notes • No USB device comes with this unit. You need to Cleaning the Unit purchase a commercially available USB device. For If the faceplate of this unit is stained, wipe it with a the types of available USB devices, refer to (page 7). If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then • If you experience problems during installation, wipe it again with a clean soft dry cloth. c
Resumen del contenido incluido en la página 5
About DAB Tuner control Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memor
Resumen del contenido incluido en la página 6
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be
Resumen del contenido incluido en la página 7
About USB device Notes on Use of the USB device This unit can play audio files stored in the flash • Install the USB device in the place where it will not memory and digital audio player that have a USB prevent you from driving your vehicle properly. port (these devices are referred to as USB devices in • Do not leave the USB device in the vehicle for a long this document). time. It can deform or damage due to direct sunlight, The following restrictions are placed on the types high tempe
Resumen del contenido incluido en la página 8
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Playable CD-R/RW format Audio file) and the media format has the following • ISO 9660 Level 1/2 limitation. The Audio file, which is not conforming • Joliet to the specification, may not play normally, or the • Romeo file and folder names may not display correctly. • Long file name. Playable Audio file Playable file format of USB device • AAC, MP3, WMA • For the formats supported by USB devices, refer to http://www.kenw
Resumen del contenido incluido en la página 9
Playing order of the Audio file • The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files are played in the order the files are written. You can specify the order of playback by numbering files in a folder and writing them by folder. (USB device) Example ^: F Fo older lder CD (1) ¡: Audio file Audio file ¡! 2 3 ¡" ¡# 4 ¡$ 5 ¡
Resumen del contenido incluido en la página 10
General features DISP VOL Control knob ATT Q SRC Clock display LOUD indicator ATT indicator Power 1 • * Y ou can operate this function when (page 29) is set to "AUX ON". Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Selecting the Source Increasing Volume Turn the [VOL] knob clockwise. Press the [SRC] button. Decreasing Volume Source required Display Turn the [VOL] knob counterclockwise.
Resumen del contenido incluido en la página 11
System Q 4 Adjust the Basic Audio item Turn the [VOL] knob. Selecting the best sound setting preset for different types of music. Adjustment Item Display Range 1 Rear Volume * "R-VOL" 0 — 35 1 Select the source to set 2,3 Subwoofer level* "SW L" –15 — +15 Press the [SRC] button. 4 Bass level* "BAS L" –8 — +8 4 Middle level* "MID L" –8 — +8 2 Select the Sound type 4 Treble level* "TRE L" –8 — +8 Press the [Q] button. Balance "BAL" Left 15 — Right 15 When you press the button once, the current 3
Resumen del contenido incluido en la página 12
General features Adjusting the detail of Audio Audio Setup Control Setting the Sound system, such as Cross over Network. Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. 1 Select the source to adjust Press the [SRC] button. 1 Select the Basic Audio item Select the desired item to be set in detail from 2 Enter Audio Setup mode followings; Press the [VOL] knob for at least 1 second. • Bass level 3 Select the Audio Setup item to adjust • Midd
Resumen del contenido incluido en la página 13
• You can use the Dual Zone System with the internal TEL Mute auxiliary input. The audio system automatically mutes when a 5 Exit Audio Setup mode call comes in. Press the [VOL] knob for at least 1 second. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Speaker Setting Press the [SRC] button. The "CALL" display disappears and the audio Fine-tuning so that the System Q value is optimal system comes back ON. when setting the speaker type.
Resumen del contenido incluido en la página 14
General features Switching Display Changing the information displayed. Press the [DISP] button. Each time the button is pressed, the display switches as shown below. In Tuner source Information Display Frequency "FREQ" Clock "CLOCK" In CD & External disc source Information Display Disc title "D-TITLE"* Track title "T-TITLE"* Track number & Play time "P-TIME" Clock "CLOCK" In Audio file source Information Display Song title & Artist name "TITLE"* Album name & Artist name "ALBUM"* Folder name "FO
Resumen del contenido incluido en la página 15
Tuner/TV control features Control knob AUTO/AME SRC 1 - 6 Band display Frequency display Preset station ST indicator number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AU
Resumen del contenido incluido en la página 16
Tuner/TV control features Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is disp
Resumen del contenido incluido en la página 17
Function of LX BUS Television Function of remote control TV Tuning Direct TV Tuning Selecting the TV channel of a connected LX BUS Entering the TV channel and tuning. Television (optional accessory). 1 Select the TV band The action depends on the setting of the Press the [FM] button. connected LX BUS Television. Refer to the user instruction of the LX BUS Television for details. 2 Enter Direct TV Tuning mode Press the [DIRECT] button on the remote 1 Select TV source control. Press the [SRC] b
Resumen del contenido incluido en la página 18
CD/USB device/Audio file/External disc control features Control knob SRC S.MODE SCAN RDM/ REP F.SEL M.RDM A.RDM/3 Track number Play time Disc number IN indicator Play mode Playing CD & Audio file Playing USB device When a disc is inserted Playing USB device Press the [SRC] button. 1 Select a source other than the USB device Select the "CD" display. Press the [SRC] button. 2 Connect the USB device. • When a disc is inserted, the "IN" indicator is ON. 3 Select USB source Pause and play Press the [
Resumen del contenido incluido en la página 19
• You can cancel the announcement when selecting Fast Forwarding and Reversing the folder by (page 30) during the play of the ACDrive media. Fast Forwarding Hold down toward [¢] with the Control Pause and play knob. Press the Control knob. Release to resume the playback. Each time you press the knob, the audio pauses or plays. Reversing Hold down toward [4] with the Control Removing the USB device knob. 1 Select a source other than the USB device Release to resume the playback
Resumen del contenido incluido en la página 20
CD/USB device/Audio file/External disc control features Function of remote control Track/File/Disc/Folder Repeat Direct Track/File Search Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Doing Track/File Search by entering the track/file number. Press the [REP] button. Each time you press the button, the Repeat Play 1 Enter the track/file number alternates between the modes shown in the Press the number buttons on the remote tables below. control. In C
