Resumen del contenido incluido en la página 1
6LT
OIL-LESS
COMPRESSOR
MOC6L
INSTRUCTION MANUAL
1
C o de: MOC6L IM
Black Magenta
Cyan Yellow
D a t e: 070620 E dition: 02 Op: MM
Resumen del contenido incluido en la página 2
Contents Warranty 2 Warranty Power Tools Warning labels explained 3 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass Introduction 4 manufacturing techniques, a tool may not live up to our Environmental protection 4 required level of performance and you may need the assistance of our service department. Description of symbols 4 This product is warranted for a 2-year period for home Specifications 4 domestic use from the date of th
Resumen del contenido incluido en la página 3
Warning labels explained On the tank of your air compressor you will notice various warnings about the operation of the compressor. These warnings and the procedures associated with them are explained fully in this manual on the following pages. Please take note of these. They are important for your safety and that of others in the vicinity. ���� � ���� � ������� � ������� Read instruction manual Test the safety relief Air discharged from prior to starting unit. valve daily. this unit
Resumen del contenido incluido en la página 4
Introduction Description of symbols Your new GMC power tool will more than satisfy The rating plate on your tool may show symbols. your expectations. It has been manufactured under These represent important information about the stringent GMC Quality Standards to meet superior product or instructions on its use. performance criteria. You will find your new tool easy and safe to operate, Wear hearing protection. and, with proper care, it will give you many years Wear eye protection. of
Resumen del contenido incluido en la página 5
c. Do not expose power tools to rain or wet conditions. General safety rules Water entering a power tool will increase the risk of WARNING. To use this tool properly, you must observe electric shock. the safety regulations, the assembly instructions and the d. Do not abuse the cord. Never use the cord for operating instructions to be found in this Manual. All persons carrying, pulling or unplugging the power tool. who use and service the machine have to be acquainted Keep cord away from
Resumen del contenido incluido en la página 6
g. If devices are provided for the connection of dust 5. Service extraction and collection facilities, ensure these are a. Have your power tool serviced by a qualified repair connected and properly used. Use of these devices person using only identical replacement parts. This can reduce dust related hazards. will ensure that the safety of the power tool is maintained. 4. Power tool use and care Additional safety rules for air compressors a. Do not force the power tool. Use the correct power
Resumen del contenido incluido en la página 7
• Never directly inhale the compressed air produced • Keep the compressor at least 300mm from the nearest by a compressor and do not use it for charging wall to ensure adequate ventilation for cooling purposes. breathing tanks. • Before transporting the compressor make sure that • Do not use welding equipment in close proximity to the the pressurized air is bled from the tank and that the compressor. Do not weld anything to the air tank of the compressor is firmly secured. compressor: t
Resumen del contenido incluido en la página 8
The following hazards may arise in connection with the tool’s construction and design: • Damage to the lungs if an effective breathing mask is not worn. • Damage to hearing if effective earmuffs are not worn. • Damage to the eyes if effective safety goggles or shield are not worn. WARNING. In the event that an air line is cut or broken, the air line needs to be immediately disconnected from the compressor at the quick release fitting. This will automatically stop the air from free flow
Resumen del contenido incluido en la página 9
Know your product 20 1 2 3 1. On/off switch 2. Handle 3. On board removable storage container 4. Fold away handle 5. Cooling air outlets 12 6. Wheels (X2) 7. Levelling feet (X2) 11 8. Quick connect regulated outlet valve 9. Regulating knob 10. Safety valve 11. Tank pressure gauge 12. Regulated outlet pressure gauge 13. Drain cock 14. Power cord storage 15. Blow gun 16. Blow gun adaptor 17. Tapered inflation fitting 18. Tire chuck 18 19. Inflation needle 20. Nitto fitted air hose coil 16 1
Resumen del contenido incluido en la página 10
WARNING. Be aware that pressurised air will be discharged To start the air compressor from the outlet and care should be taken that this discharge 1. Check the rating label on the compressor is not directed towards you the operator, or other persons indicates 230V-240V. within the area. 2. Make sure that the selected location for the compressor 9. To stop the compressor, push the yellow “On/Off” (1) is clean, dry, well ventilated and without any obstruction. switch to the “off” setting. 3
Resumen del contenido incluido en la página 11
To increase the regulated air pressure rotate the pressure Note. Always shut off the compressor after use and regulating knob clockwise. To decrease the regulated air before servicing. pressure rotate the regulating knob anti-clockwise. WARNINGS. When setting the the regulated outlet pressure always start 1. Never attempt to remove any part of the compressor with the pressure being low, working your way up to the whilst the tank is under pressure. desired regulated pressure. 2. Never at
Resumen del contenido incluido en la página 12
3. Connect the completed assembly to the air line by Connecting the inflation needle pulling back the outer sleeve of the quick coupler at the to the quick change blow gun end of the air hose and insert the quick change blower In order to use the inflation needle you are required to assembly. Once inserted, release the outer sleeve of attach the blow gun adaptor (16) to the blow gun (15). the coupling and make sure the accessory and hose are Proceed to screw in the inflation needle (19)
Resumen del contenido incluido en la página 13
4. Firmly press the tyre inflator down; doing so opens Connecting the tyre inflator both the valve on the tyre and the valve on in the tyre 1. To connect the tyre inflator, inflator allowing air to flow through. Use a tyre gauge to N select one of the supplied 1/4” check air pressure in the tyres. Check the ratings printed male Nitto style plugs/adaptors on the side walls of the tyre that you are inflating for (21). Apply the supplied Teflon reference as to the recommended maximum air p
Resumen del contenido incluido en la página 14
Troubleshooting continued Problem Possible cause Suggested remedy Loose part Use authorised service centre Vibration or abnormal noise to check and repair if necessary Foreign body in main compressor Use authorised service centre to check and clean if necessary Piston connecting with the valve seat Use authorised service centre to increase size of gasket Moving parts excessively worn Use authorised service centre to repair or replace Motor running too slow Use authorised service centre t
Resumen del contenido incluido en la página 15
Troubleshooting continued Problem Possible cause Suggested remedy The tool requires air supply outside the 1) Select another air tool that that will Insufficient pressure or decreased range of the compressors capabilities. allow you to achieve the same end outlet capacity continued result which will operate within the compressors capabilities. 2) Select another tool to achieve the same result (could be a power tool or hand tool) to perform the task. 3) Purchase a suitable air compressor
Resumen del contenido incluido en la página 16
Troubleshooting continued Problem Possible cause Suggested remedy Air fittings leaking. Check all air fittings. Make sure that Insufficient pressure or decreased they are tight and not leaking at the outlet capacity continued joins. If a quick release fitting is leaking, disconnect it and reconnect it. If it continues to leak replace the defective fitting(s). If a male or female fitting is leaking around the thread tighten using a spanner. If the fitting is already tight and can’t be ti
Resumen del contenido incluido en la página 17
Cleaning 1. Keep the tool’s air vents unclogged and clean at all times. 2. Remove dust and dirt regularly. Cleaning is best done with a soft brush or a rag. 3. Re-lubricate all moving parts at regular intervals. 4. If the body of the compressor needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent. 5. Never use caustic agents to clean plastic parts. CAUTION. Water must never come into contact with the tool. Powe
Resumen del contenido incluido en la página 18
18
Resumen del contenido incluido en la página 19
19
Resumen del contenido incluido en la página 20
GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au. Should you not have access to the Internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand). 7am –7pm, 7days a week (AEST). Please n
