Resumen del contenido incluido en la página 1
2000
D
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-LH2000R
SOUND
U
R SOURCE F
D
VOL VOL
This unit is equipped with the display demonstration. To cancel it, see page 8.
Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf
Seite 8 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
Cet appareil est équipé d’une démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
Dit toestel heeft een display-demonstratiefunctie. Zi
Resumen del contenido incluido en la página 2
Position And Reproduction Of Labels Bottom panel of the main unit CAUTION: Invisible laser ADVARSEL: Usynlig laser- VARNING: Osynlig laser- VARO: Avattaessa ja radiation when open and stråling ved åbning, når strålning när denna del är suojalukitus ohitettaessa interlock failed or defeated. sikkerhedsafbrydere er ude öppnad och spärren är olet alttiina näkymättö- af funktion. Undgåudsæt- urkopplad. Betrakta ejmälle lasersäteilylle. A VOID DIRECT EXPOSURE TO BEAM. (e) telse for
Resumen del contenido incluido en la página 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 Selecting a directory ................................. 27 How to use the MODE (M) button ............ 2 Selecting MP3 playback modes ............... 28 Changing the display pattern .................... 30 LOCATION OF THE BUTTONS ..........
Resumen del contenido incluido en la página 4
2000 D LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 678 9 p q w e r t y u i o ; a 1 (standby/on/attenuator) button e DISP (D) (display) button 2 SEL (select) button • Also functions as SSM buttons when pressed 3 Control dial together with MODE (M) button. 4 Display window r MODE (M) button 5 Number buttons • Also functions as SSM buttons when pressed 6 Remote sensor together with DISP (D) (display) button. 74 /¢ buttons t FM/AM DAB button 85 (up) button y CD/CD-CH button 90 (eject) button u
Resumen del contenido incluido en la página 5
3 • Selects the preset stations while listening to Remote controller the radio (or the DAB tuner). Each time you press the button, the preset station (or service) number increases, and the selected station(or service) is tuned in. • Skips to the previous disc while listening to ATT SOUND the CD changer. 1 5 Each time you press the button, the disc number decreases, and the selected disc 6 starts playing. 2 U • Skips to the first file of the previous directory SOURCE F R while listening to an MP
Resumen del contenido incluido en la página 6
2000 D 3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) Remote sensor • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing the battery When the controllable range or effectiveness of the remote
Resumen del contenido incluido en la página 7
2000 D BASIC OPERATIONS 2 3 1 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. To decrease the volume. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume level appears 4 Adjust the sound as you want. (See pages 31 – 34.) To drop the volume in a moment To operate the tuner (FM or AM), Press briefly while listening to an
Resumen del contenido incluido en la página 8
Changing the display pattern Cancelling the display demonstration You can change the display pattern. The number of the selectable display patterns When shipped from the factory, display varies according to the playback sources. demonstration (MovieDemo) has been activated, However, the unit basically provides three main and starts automatically when no operations are display patterns for each source, and once one done for about 20 seconds. of these three patterns is selected, the same • It is r
Resumen del contenido incluido en la página 9
2000 D RADIO OPERATIONS Listening to the radio 2 Start searching for a station. Press ¢ to You can use either automatic searching or manual search for stations searching to tune in to a particular station. of higher frequencies. Searching for a station automatically: Auto search Press 4 to search for stations of lower 1 Select the band (FM1 – 3, AM). frequencies. FM1 FM2 FM3 AM Ex.: When the band is FM When a station is received, searching stops. Last received station of the selected band is T
Resumen del contenido incluido en la página 10
Searching for a station manually: When an FM stereo broadcast is hard to Manual search receive: 1 Press MODE (M) to enter the functions mode while listening to 1 Select the band (FM1 – 3, AM). an FM stereo broadcast. “Mode” appears on the display. 2 Press MO (monaural), while FM1 FM2 FM3 AM “Mode” is still on the display, so that the MO indicator is highlighted on the display. Note: Each time you press MO, “Mono This receiver has three FM bands (FM1, FM2, On” and “Mono Off” alternately FM3). You
Resumen del contenido incluido en la página 11
Manual preset Storing stations in memory You can preset up to 6 stations in each band (FM1, You can use one of the following two methods to FM2, FM3 and AM) manually. store broadcasting stations in memory. Ex.: Storing an FM station of 88.3 MHz into the • Automatic preset of FM stations: SSM (Strong- preset number 1 of the FM1 band. station Sequential Memory) • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you want to store stations into (in this FM station automatic p
Resumen del contenido incluido en la página 12
Selecting a preset station using the 4 Repeat the above procedure to store preset station list other stations into other preset numbers. If you forget what stations are stored in what preset numbers, you can check the preset station Note: list, then select your desired station on the list. A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1 – 3, AM). Tuning in to a preset station FM1 FM2 FM3 AM You can easily tune in to a preset st
Resumen del contenido incluido en la página 13
Changing the display pattern By pressing DISP (D), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: • When receiving an AM or FM non-RDS • When receiving an FM RDS station (see the station following pages) Large animation display Large animation display PS name Small animation display Small animation displays PTY code appears Clock time display Clock time display 13 EN09-13LH2000R[E]f.pm5 13 02.3.29, 4:23 PM ENGLISH
Resumen del contenido incluido en la página 14
RDS OPERATIONS The same programme can be received on What you can do with RDS different frequencies. RDS (Radio Data System) allows FM stations to Programme 1 send an additional signal along with their regular broadcasting Programme 1 programme signals. For example, the stations on frequency A broadcasting send their station names, as well as information on frequency E about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “Enhanced
Resumen del contenido incluido en la página 15
Using TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from the current source (another FM station or CD and other connected components). AF indicator REG indicator • TA Standby Reception will not work if you are listening Note: to an AM station. If a DAB tuner is connected and Alternative Reception (for DAB services) is activated, Network-Tracking Reception is also activated (“AF”) automatically. On the other hand, Network-Tracking Rec
Resumen del contenido incluido en la página 16
Using PTY Standby Reception 5 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) from the current source (another FM station, CD or other connected components). • PTY Standby Reception will not work if you are listening to an AM station. You can select your favourite programme type for PTY Standby Reception. PTY indicator When shipped from the factory, PTY Standby Reception is turned off. (“Off” is selected for PTY 7
Resumen del contenido incluido en la página 17
Searching for your favorite programme To search for your favorite programme type You can search for any one of the PTY codes. 1 Press and hold TP/PTY (T) In addition, you can store your 6 favourite for more than 2 seconds programme types in the number buttons. while listening to an FM When shipped from the factory, the following 6 station. programme types have been stored in the number buttons (1 to 6). 1 2 3 POP M Rock M Easy M 45 6 Classics Affairs Varied The last selected PTY code appears. To
Resumen del contenido incluido en la página 18
Automatic selection of the station 3 Start PTY search when using the number buttons for your favorite programme. Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. (Programm
Resumen del contenido incluido en la página 19
To reactivate clock adjustment, repeat the same Automatic clock adjustment procedure and select “On” in step 4 by turning the When shipped from the factory, the clock built in control dial clockwise. this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal. Note: If you do not want to use automatic clock You must stay tuned to the same station for more than 2 adjustment, follow the procedure below. minutes after setting “Auto Adj” to “On.” Otherwise, • See
Resumen del contenido incluido en la página 20
2000 D CD OPERATIONS Notes: Playing a CD • When a disc is already in the loading slot, selecting “CD” as the source starts CD play. 1 Open the control panel. • When a disc is inserted upside down, the disc automatically ejects (if the control panel is open). If the control panel is closed, “Please Eject” appears. • If you change the source, CD play also stops (without ejecting the disc). Next time you select “CD” as the source, CD play starts from where playback has been stopped 2 Insert a disc
