Resumen del contenido incluido en la página 1
GAS DRYER
USE & CARE GUIDE
FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE, PARTS, ACCESSORIES OR SERVICE CALL: 1.800.688.9900
VISIT OUR WEBSITE AT WWW.MAYTAG.COM
W10155111A
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS DRYER SAFETY........................................................................................................................2 DRYER USE........................................................................................................................... 14 INSTALLATION INSTRUCTIONS ...........................................................................................5 Starting Your Dryer..........................................................................
Resumen del contenido incluido en la página 3
WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS: Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. Clear the room, building, or area of all occupants. Immediat
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS WA RNING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions, including the following: ■ Read all instructions before using the dryer. ■ Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in this ■ Do not place items exposed to cooking oils in your dryer. Use and Care Guide or in published user-repair Items contaminated wit
Resumen del contenido incluido en la página 5
INSTALLATION INSTRUCTIONS Tools and Parts Location Requirements Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. WARNING ■ 8" or 10" pipe wrench ■ Level ■ 8" or 10" adjustable ■ Knife wrench (for gas ■ Vent clamps connections) ■ Pipe-joint compound ■ Flat-blade screwdriver resistant to LP gas ■ Adjustable wrench that ■ Caulking gun and Explosion Hazard opens to 1" (2.5 cm) or compound (for installing
Resumen del contenido incluido en la página 6
■ Companion appliance spacing should also be considered. Installation Clearances The location must be large enough to allow the dryer door to open fully. 3"* (7.6 cm) Dryer Dimensions 14" max.* 2 (35.6 cm) 48 in. * 2 (310 cm ) 18"* (45.7 cm) 2 43½" 24 in. * 3"* 2 (110.5cm) (155 cm ) (7.6 cm) 1" 27" 1" 1"* 29¼" 5" (2.5 cm) (68.6 cm) (2.5 cm) (2.5 cm) (74.3 cm) (14 cm) A B C 14³⁄₁₆" (36cm) A. Recessed area *29¼" (74.3cm) B. Side view - clos
Resumen del contenido incluido en la página 7
Electrical Requirements Gas Supply Requirements WARNING WARNING Electrical Shock Hazard Explosion Hazard Plug into a grounded 3 prong outlet. Use a new CSA International approved gas supply line. Install a shut-off valve. Do not remove ground prong. Securely tighten all gas connections. Do not use an adapter. If connected to LP, have a qualified person make sure Do not use an extension cord. gas pressure does not exceed 13" (33 cm) water Failure to follow these instructions can result in death
Resumen del contenido incluido en la página 8
■ ³⁄₈" approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit. Dryer Gas Pipe ■ If you are using Natural gas, do not use copper tubing. ■ The gas pipe that comes out through the rear of your dryer has a ³⁄₈" male pipe thread. ■ Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting. ■ If your dryer has been converted to use LP gas, ³⁄₈" LP compatible copper tubing can be used. If the total length
Resumen del contenido incluido en la página 9
Clamps If using an existing vent system ■ Use clamps to seal all joints. ■ Exhaust vent must not be connected or secured with screws or other fastening devices ■ Clean lint from the entire length of the system and make sure exhaust hood is not plugged that extend into the interior of the duct. Do not use duct tape. with lint. ■ Replace any plastic or metal foil vent with rigid or flexible heavy metal vent. ■ Review Vent system chart. Modify existing vent system if necessary to achieve the be
Resumen del contenido incluido en la página 10
Plan Vent System Choose your exhaust installation type Recommended exhaust installations Typical installations vent the dryer from the rear of the dryer. Other installations are possible. B AB C C D A. Standard rear offset exhaust installation B. Left or right side exhaust installation E A C. Bottom exhaust installation F Alternate installations for close clearances G Venting systems come in many varieties. Select the type best for your installation. Two close- clearance installations are shown.
Resumen del contenido incluido en la página 11
Special provisions for mobile home installations Vent system chart The exhaust vent must be securely fastened to a noncombustible portion of the mobile home NOTE: Side and bottom exhaust installations have a 90º turn inside the dryer. To determine structure and must not terminate beneath the mobile home. Terminate the exhaust vent maximum exhaust length, add one 90º turn to the chart. outside. Number of Type of Box or Angled 90º turns vent louvered hoods or elbows hoods 0 Rigid metal 64 ft (20
Resumen del contenido incluido en la página 12
2. Firmly grasp the body of the dryer (not the top or console panel). Gently lay the dryer on A combination of pipe fittings must be used to connect the dryer to the existing gas line. the cardboard. See illustration. Shown is a recommended connection. Your connection may be different, according to the supply line type, size and location. D 3. Examine the leveling legs. Find the diamond marking. A B C 4. Screw the legs into the leg holes by hand. Use a wrench to finish turning the legs until
Resumen del contenido incluido en la página 13
Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to 6. Remove any protective film on the console and any tape remaining on the dryer. see which step was skipped. 7. Dispose of/recycle all packaging materials. 2. Check that you have all of your tools. 8. Read “Dryer Use.” 3. Check the dryer’s final location. Be sure the vent is not crushed or kinked. 9. Wipe the dryer drum interior thoroughly with a damp cloth to remove any dus
Resumen del contenido incluido en la página 14
DRYER USE Starting Your Dryer WARNING WARNING Explosion Hazard Fire Hazard Keep flammable materials and vapors, such as No washer can completely remove oil. gasoline, away from dryer. Do not dry anything that has ever had any type of oil on Do not dry anything that has ever had anything it (including cooking oils). flammable on it (even after washing). Items containing foam, rubber, or plastic must be dried Failure to follow these instructions can result in death, on a clothesline or by usi
Resumen del contenido incluido en la página 15
Drying Rack DRYER CARE The drying rack is useful for machine drying items you would not necessarily want to tumble dry (for example, sweaters). If your model does not have a drying rack, you may be able to purchase one for your model. Cleaning the Dryer Location To find out whether your model allows drying rack usage and for information on ordering, Keep dryer area clear and free from items that would obstruct the flow of combustion and please refer to the front page of the manual or conta
Resumen del contenido incluido en la página 16
As Needed Cleaning Vacation and Moving Care 1. Roll lint off the screen with your fingers. Vacation care 2. Wet both sides of lint screen with hot water. 3. Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to Operate your dryer only when you are at home. If you will be on vacation or not using your remove residue buildup. dryer for an extended period of time, you should: 4. Rinse screen with hot water. 1. Unplug dryer or disconnect power. 5. Thoroughly dr
Resumen del contenido incluido en la página 17
TROUBLESHOOTING First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call... In U.S.A www.maytag.com/help - In Canada www.maytag.ca Timer does not noticeably advance Dryer Operation ■ Is the dryer set to Timed Dry? Dryer will not run The timer moves slowly and continuously for the time setting. ■ Is the dryer set to Sensor Dry? ■ Has a household fuse blown, or has a circuit breaker tripped? The tim
Resumen del contenido incluido en la página 18
■ Is the exhaust vent diameter the correct size? Use 4" (10.2 cm) diameter vent material. Cycle time too short WARNING WARNING Excessive Weight Hazard Use two or more people to move and install dryer. Failure to do so can result in back or other injury. Explosion Hazard ■ Is the Sensor Dry cycle ending early? Keep flammable materials and vapors, such as The load may not be contacting the sensor strips. Level the dryer. gasoline, away from dryer. Change the dryness level setting on Sensor Dry c
Resumen del contenido incluido en la página 19
ASSISTANCE OR SERVICE ACCESSORIES Before calling for assistance or service, please check “Troubleshooting.” It may save you the Enhance your dryer with these premium accessories. cost of a service call. If you still need help, follow the instructions below. For more high-quality items or to order, call 1-800-901-2042, or visit us at When calling, please know the purchase date and the complete model and serial number of www.maytag.com/accessories. your appliance. This information will help us t
Resumen del contenido incluido en la página 20
MAYTAG CORPORATION MAJOR APPLIANCE WARRANTY ONE YEAR LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Maytag Corporation or Maytag Limited (hereafter “Maytag”) will pay for Factory Specified Parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Maytag designated service company. This limited warranty applies only when t
