Resumen del contenido incluido en la página 1
CD RECEIVER KD-AR800/KD-G800/KD-G700
RECEPTOR CON CD KD-AR800/KD-G800/KD-G700
RECEPTEUR CD KD-AR800/KD-G800/KD-G700
KD-AR800
ATT SOUND
U
R SOURCE F
D
VOL VOL
KD-G800
ATT SOUND
U
R SOURCE F
D
VOL VOL
KD-G700
ATT SOUND
U
R SOURCE F
D
VOL VOL
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour
Resumen del contenido incluido en la página 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Resumen del contenido incluido en la página 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 MP3/WMA OPERATIONS .................. 18 How to use the MODE button ................... 3 Playing a disc ............................................ 18 Locating a file or a particular portion LOCATION OF THE BUTTONS ............ 4 on a dis
Resumen del contenido incluido en la página 4
LOCATION OF THE BUTTONS Control panel Display window f g h j k l / z x c v b n m , . P 23 45 6 79 8 1 KD-AR800 KD-G800 KD-G700 p q w e r t y u i o; a s d 1 For KD-AR800: d∞ (down) button • CD/CD-CH (CD changer) LINE button –10 button For KD-G800: • CD/CD-CH (CD changer) button Display window For KD-G700: f Disc information indicators— (track/file), • CD button TAG (ID3 Tag), (folder) 2 (standby/on attenuator) button g MP3 indicator 3 DISP (display) button h For KD-AR800/KD-G800: 4 SEL (select)
Resumen del contenido incluido en la página 5
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. ATT SOUND • Skips to the first file of the previous folder while listening to an MP3 or a WMA disc. Each time you press the button, you can move to the previous folder and start playing U the first file. • For KD-AR800/KD-G800: R SOURCE F While playing an MP3 disc on an MP3- D compatible CD changer; – Skips to t
Resumen del contenido incluido en la página 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) WARNING: Remote sensor • Store the battery in a place where children cannot reach. • Do not expose the remote sensor to strong If a child accidentally swallows the battery, light (direct sunli
Resumen del contenido incluido en la página 7
BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. 1 Turn on the power. To increase the volume To decrease the volume Note on One-Touch Operation: Volume level appears. When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume level indicator 4 Adjust the sound as you want. (See pages 23 – 25.) (For KD-AR800) (For KD-G800) To drop the volume in a moment Press briefly while list
Resumen del contenido incluido en la página 8
Canceling the display 3 Select “DEMO OFF.” demonstration When shipped from the factory, display demonstration has been activated, and starts DEMO OFF DEMO ON automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
Resumen del contenido incluido en la página 9
Setting the clock 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 26 and 27.) Note: To show the clock time on the display, see page 28. To check other information during play, press DISP (display). 2 Set the hour. 1 Select “CLOCK HOUR” if not shown on the display. 2 Adjust the hour. 12 Each time you press the button, the other information will be shown on the lower part of the display. (See page 28 f
Resumen del contenido incluido en la página 10
RADIO OPERATIONS Listening to the radio 2 Start searching for a station. To search for stations of You can use either automatic searching or manual higher frequencies searching to tune in to a particular station. Searching for a station automatically: To search for stations of lower frequencies Auto search When a station is received, searching stops. 1 Select the band (FM1 – 3, AM). To stop searching before a station is received, Each time you press the press the same button you have pressed for
Resumen del contenido incluido en la página 11
Storing stations in memory 3 Tune in to a station you want while “M.SEEK” (manual seek) is still on You can use one of the following two methods to the display. store broadcasting stations in memory. To tune in to stations of • Automatic preset of FM stations: SSM (Strong- higher frequencies station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM To tune in to stations of lower frequencies You can preset 6 local FM stations in each FM • If you relea
Resumen del contenido incluido en la página 12
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band numbers. (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 92.5 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, want to
Resumen del contenido incluido en la página 13
CD OPERATIONS Refer to “MP3/WMA OPERATIONS” on pages 18 The display changes to show the following: to 22 for operating MP3/WMA discs. Playing a CD CD indicator Current source 1 Open the control panel. indication* Total playing time Total track number of the inserted disc of the inserted disc Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD/CD-CH LINE (for KD-AR800) or Current track CD/CD-CH (for KD-G800) or CD (for Elapsed playing time number KD-G700) turns on t
Resumen del contenido incluido en la página 14
To stop play and eject the CD To go to the next or previous tracks Press ¢ briefly, while Press 0. playing a CD, to go ahead to CD play stops and the control panel moves the beginning of the next down. The CD automatically ejects from the track. loading slot. Each time you press the • If you change the source or turn the power off, button consecutively, the CD play also stops (without ejecting the CD). beginning of the next tracks Next time you select “CD” as the source, CD is located and playe
Resumen del contenido incluido en la página 15
To play back tracks repeatedly How to use the +10 and –10 buttons (Track Repeat Play) • Ex. 1: To select track number 32 while You can play back the current track repeatedly. playing track number 6 1 Press MODE to enter the functions mode while playing a CD. (Three times) (Twice) 2 Press RPT (repeat), while Track 6 \ 10 \ 20 \ 30 \ 31 \ 32 “MODE” is still on the display, so that “TRK RPT” appears on the • Ex. 2: To select track number 8 while playing display. track number 36 Each time you press
Resumen del contenido incluido en la página 16
Playing a CD Text Prohibiting disc ejection In a CD Text, some information about the disc (its You can prohibit disc ejection and can lock a disc disc title, performer, and track title) is recorded. in the loading slot. This CD Text information will be shown automatically when you play a CD Text. While pressing CD/CD-CH LINE (for KD-AR800) or CD/CD-CH (for KD-G800) To change the CD Text information or CD (for KD-G700), press and hold manually, select text display mode while for more than 2 seco
Resumen del contenido incluido en la página 17
Hierarchy MP3/WMA INTRODUCTION What are MP3/WMA? How are MP3/WMA files recorded and played back? MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a MP3/WMA “files (tracks)” can be recorded in file format with a data compression ratio of 1:10 “folders” —in PC terminology. (128 Kbps*). During recording, the files and folders can be arranged in a way similar to arranging files and ® WMA (Windows Media Audio) is the digital folders of computer data. aud
Resumen del contenido incluido en la página 18
MP3/WMA OPERATIONS Refer also to “CD OPERATIONS” on pages The display changes to show the following: 13 to 16. Playing a disc 1 Open the control panel. CD indicator Current source 1 indication* Note on One-Touch Operation: Total folder Total file When a disc is already in the loading slot, number number pressing CD/CD-CH LINE (for KD-AR800) or CD/CD-CH (for KD-G800) or CD (for KD-G700) turns on the unit and starts playback automatically. 2 Insert a disc into the loading slot. 2 MP3 or WMA indica
Resumen del contenido incluido en la página 19
Notes: To stop play and eject the disc • The display shows up to 12 characters at a time and Press 0. scrolls if there are more than 12 characters. Playback stops and the control panel moves See also “To select the scroll mode—SCROLL down. MODE” on page 29. The disc automatically ejects from the loading • When file name is shown, TRACK indicator and slot. current track number also appear on the lower part of the display. To change the display information While playing back an MP3/WMA file, you c
Resumen del contenido incluido en la página 20
To go to a particular file quickly within the To go to a particular folder directly current folder (+10 and –10 buttons) IMPORTANT: 1 Press MODE to enter the functions mode To directly select the folders using the number while playing a disc. button(s), it is required that folders are assigned 2 digit numbers at the beginning of their folder names. (This can only be done during the recording of CD-Rs or CD-RWs.) Ex.: If folder name is “01 ABC” = Press 1 to go to Folder 01 ABC. 2 Press +10 or –10
