Resumen del contenido incluido en la página 1
CD RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
KD-G417/KD-G317
For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
В соответствии с Законом Российской Федерации “О защите прав потре бителей” срок службы
(годности) данного товара “по истечении которого он может представлять опасность для жизни,
здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)
лет со дн
Resumen del contenido incluido en la página 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid dire
Resumen del contenido incluido en la página 3
Contents How to reset your unit ........................... 2 Sound adjustments ................ 18 How to forcibly eject a disc ................... 2 Selecting preset sound modes How to read this manual ........................ 4 (C-EQ: custom equalizer) .................. 18 How to use the MODE button ............... 4 Adjusting the sound ............................... 19 Control panel General settings — PSM ......... 20 — KD-G417/KD-G317 ............... 5 Basic procedure ..................
Resumen del contenido incluido en la página 4
How to read this manual How to use the MODE button The following methods are used to make the If you press MODE, the receiver goes into explanations simple and easy-to-understand: functions mode, then the number buttons and Some related tips and notes are explained in ¢/4 buttons work as different “More about this receiver” (see page 25). function buttons. Only for KD-G417: This receiver can show the Russian fonts, if a CD Text or an Ex.: When number button 2 works as MP3/WMA files c
Resumen del contenido incluido en la página 5
Control panel — KD-G417/KD-G317 Parts identification Display window 1 +/– buttons o (control panel release) button 2 DISP (display) button ; Number buttons 3 Loading slot 4 Display window Display window 5 MODE button a Tuner reception indicators—MO (monaural), 6 0 (eject) button ST (stereo) 7 ¢/4 buttons s WMA indicator 8 (standby/on/attenuator) button d RDS indicators—TP, PTY, AF, REG 9 SEL (select) button f MP3 indicator p Remote sensor g CD indicator You can control this receiver with
Resumen del contenido incluido en la página 6
Getting started Basic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Ÿ To turn off the power You cannot select “CD” as the playback source if there is no disc in the loading slot. Caution on volume setting: Discs produce very little noise compared ! with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Volume level appears. Volume level indicator ⁄ Adjust the soun
Resumen del contenido incluido en la página 7
Canceling the display Setting the clock demonstrations 1 If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 20. 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then 1 adjust the hour. 2 Select “CLOCK M” (minute), then adjust the minute. 2 3 Finish the procedure. 3 To check the current clock time when the power is turned off 4 Finish the procedure. To activate the display demonstration In step 3 above... 7 EN06-11KD-G417_G317[
Resumen del contenido incluido en la página 8
Radio operations Listening to the radio To tune in to a station manually ~ In step Ÿ on the left... 1 Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. 2 Select the desired station frequencies. When a station is received, searching stops. To stop searching, press the same button again. Note: FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz 8 EN06-11KD-G417_G317[EE]f.indd 8 EN06-11KD-G417_G3
Resumen del contenido incluido en la página 9
When an FM stereo broadcast is hard to Storing stations in memory receive 1 You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential 2 Memory) 1 Select the FM band (FM1 – FM3) you want to store into. Lights up when monaural mode is activated. 2 Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure so that the MO indicator goes off. 3 “SSM” flashes, then disappears when automatic pre
Resumen del contenido incluido en la página 10
Manual presetting Listening to a preset station Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 1 2 Select the preset station (1 – 6) you want. 2 To check the current clock time while listening to an FM (non-RDS) or AM station 3 For FM RDS stations, see page 13. Preset number flashes for a while. 10 EN06-11KD-G417_G317[EE]f.indd 10 EN06-11KD-G417_G317[EE]f.indd 10 3 3/18/05 11:30:43 AM /18/05 11:30:43 AM ENGLISH
Resumen del contenido incluido en la página 11
FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your ! Start searching for your favorite favorite programme by searching for a PTY code. programme. ~ The last selected PTY code appears. If there is a station broadcasting a programme of the same PTY code as Ÿ Select one of your favorite you have selected, that station is tuned programme type. in. PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, or SCIENCE, VARIED, POP
Resumen del contenido incluido en la página 12
3 Repeat steps 1 and 2 to store What you can do with RDS other PTY codes into other preset RDS (Radio Data System) allows FM numbers. stations to send an additional signal along with their regular programme signals. 4 Finish the procedure. By receiving the RDS data, this receiver can do the following: Programme Type (PTY) Search (see page 11) Standby Reception of Traffic Announcement—TA (see the following) or your favorite programme (PTY) (see pages 13 and 21) Using the standby rec
Resumen del contenido incluido en la página 13
PTY Standby Reception Tracking the same programme— PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY Network-Tracking Reception programme from any source other than AM. When driving in an area where FM reception is not sufficient enough, this receiver To activate and select your favorite PTY automatically tunes in to another FM RDS code for PTY Standby Reception, see page station of the same network, possibly 21. broadcasting the same programme with st
Resumen del contenido incluido en la página 14
Disc operations Playing a disc All tracks will be played repeatedly until you change the source or eject the disc. When inserting an audio CD or a CD Text About MP3 and WMA discs disc: ® MP3 and WMA (Windows Media Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” Total playing time of Total track number the inserted disc of the inserted disc When inserting an MP3 or a WMA disc: CD Text: Disc title/performer = Track title appears automatical
Resumen del contenido incluido en la página 15
To fast-forward or reverse the track To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly Fast-forwards. To select a number from 01 – 06: Reverses. To select a number from 07 – 12: To go to the next or previous tracks To the following tracks. To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digits number at the beginning of their folder names—01, 02, 03, and so on. To the beginning of the current track, then the previous
Resumen del contenido incluido en la página 16
Changing the display information While playing an audio CD or a CD Text 1 * If the current disc is an audio CD, “NO NAME” appears. While playing an MP3 or WMA disc When “TAG DISP” is set to “TAG ON” (see page 21) 2 * If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this case, the TAG indicator will not light up. When “TAG DISP” is set to “TAG OFF” 16 EN12-17KD-G417_G317[EE]f.indd 16 EN12-17KD-G417_G317[EE]f.indd 16 3 3/18/05 11:31:02 AM /18/05 11:31:
Resumen del contenido incluido en la página 17
Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode Plays repeatedly TRK RPT: The current track. RPT lights up. FLDR RPT*: All tracks of the current folder. and RPT light up. RPT OFF: Cancels. Ex.: When “TRK RPT” is selected while playing an MP3 disc Random play Mode Plays at random FLDR RND*: All tracks of the current folder, then tracks of the next folder and so on. RND and light up.
Resumen del contenido incluido en la página 18
Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to Preset values the music genre. Indication For: 1 2 3 * * * BAS TRE LOUD USER (Flat sound) 00 00 OFF ~ ROCK Rock or +03 +01 ON disco music CLASSIC Classical +01 –02 OFF music Ÿ POPS Light music +04 +01 OFF HIP HOP Funk or rap +02 00 ON music JAZZ Jazz music +02 +03 OFF 1 * BAS: Bass 2 * TRE: Treble 3 * LOUD: Loudness Ex.: When “ROCK” is selected Indication pattern for each so
Resumen del contenido incluido en la página 19
Indication To do: Range Adjusting the sound 1 BAS* Adjust the bass. –06 (min.) You can adjust the sound characteristics to your (bass) to preference. +06 (max.) 1 TRE* Adjust the treble. –06 (min.) 1 (treble) to +06 (max.) 2 FAD* Adjust the front R06 (Rear (fader) and rear speaker only) balance. to F06 (Front only) Ex.: When “TRE” is selected BAL Adjust the left L06 (Left (balance) and right speaker only) balance. to 2 R06 (Right only) 1 LOUD* Boost low and LOUD ON (loudness) hi
Resumen del contenido incluido en la página 20
General settings — PSM 3 Adjust the PSM item selected. Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. 2 Select a PSM item. Ex.: When you select “DIMMER” Indications Selectable settings, [reference page] DEMO DEMO ON: [Initial]; Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 second
