Resumen del contenido incluido en la página 1
MANUFACTURING COMPANY
INSTALLATION/OPERATION
MANUAL
75 Lb. Laundry Dryer
MODELS
GAS STEAM ELECTRIC
L36USS36G L36URD36G L36URS36S L36URS36E
L36USD36G L36URS36G L36URD36S L36URD36E
CISSELL MANUFACTURING COMPANY
HEADQUARTERS PHONE: (502) 587-1292
831 SOUTH FIRST ST. SALES FAX: (502) 585-3625
P.O. BOX 32270 SERVICE/PARTS FAX: (502) 681-1275
LOUISVILLE, KY 40232-2270
THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER.
MAN354 9/98 D0561
Page 1
Resumen del contenido incluido en la página 2
IMPORTANT NOTICES—PLEASE READ For optimum efficiency and safety, we recommend that you read the Manual before operating the equipment. Store this manual in a file or binder and keep for future reference. WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury, or loss of life. - Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance
Resumen del contenido incluido en la página 3
WARNING: To avoid fire hazard, do not dry articles containing foam rubber or similar texture materials. Do not put into this dryer flammable items such as baby bed mattresses, throw rugs,undergarments (brassieres, etc.) and other items which use rubber as padding or backing. Rubber easily oxidizes causing excessive heat and possible fire. These items should be air dried. WARNING: Synthetic solvent fumes from drycleaning machines create acids when drawn through the dryer. These fumes cause rus
Resumen del contenido incluido en la página 4
CISSELL DRYER WARRANTY The Cissell Manufacturing Company (Cissell) warrants all new equipment (and the original parts thereof) to be free from defects in material or workmanship for a period of two (2) years from the date of sale thereof to an original purchaser for use, except as hereinafter provided. With respect to non-durable parts normally requiring replacement in less than two (2) years due to normal wear and tear, and with respect to all new repair or replacement parts for Cissell equipme
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS 75 LB. LAUNDRY DRYER PAGE Model Numbers & Company Address ............................................................................................. 1 Important Notices ......................................................................................................................... 2-3 Dryer Warranty ............................................................................................................................... 4 Table of Contents .....................
Resumen del contenido incluido en la página 6
SYMBOLS The following symbols are used in this manual and/or on the machine. The numbers between () refer to the numbers on the machine surveys. Symbol Description Part/Measurement NOTE! Hot! Do Not Touch Heib! Nicht Beruhren Haute temperature! Ne pas toucher Caliente! no tocar Heet! Niet Aanraken dangerous voltage tension dangereuse Gafahrliche elektrische Spannung tension peligrosa on marche Ein conectado off arrêt Aus desconectado start demarrage Start arranque de un movimiento e
Resumen del contenido incluido en la página 7
SYMBOLS Symbol Description Part/Measurement rotation in two directions rotation dans les deux sens Drehbewigung in zwei Richtungen movimiento rotativo en los dos sentidos direction of rotation sens de mouvement continu de rotation Drehbewegung in Pfeilrichtung movimiento giratorio o rotatorio en el sentido de la flecha End of Cycle caution attention Achtung atencion; precaucion Page 7
Resumen del contenido incluido en la página 8
Unpacking/General Installation (All Dryers) Upon arrival of the equipment, any damage in shipment should be UNPACKING reported to the carrier immediately. Upon locating permanent location of a unit, care should be taken in movement and placement of equipment. See outline clearance diagrams for correct dimensions. Remove all packing material such as: tape, manuals, skid, etc. Leveling: Use spirit level on top of dryer. Adjust leveling bolts on dryer (see adjustable leveling bolts in maintenance s
Resumen del contenido incluido en la página 9
75 lb. “UR” Dryer Outline Dimensions (Illustration) Page 9
Resumen del contenido incluido en la página 10
75 lb. “US” Dryer Outline Dimensions (Illustration) All dimensions given in inches ± 1/4” Page 10
Resumen del contenido incluido en la página 11
Specifications Basket Load Capacity ............................. 75 lbs. (34.0 kg) dryweight GENERAL SPECIFICATIONS Floor Space ............................................. 75” (191 cm) H x 38” (96 cm) NON-ENERGY SAVER W x 51” (130 cm) Deep MODELS Basket Size .............................................. 36” (91 cm) diameter x 36” Deep - 21 cu. ft. (0.63 M³) Exhaust Duct ........................................... 8” diameter (20.3 cm) Motor Sizes .............................................
Resumen del contenido incluido en la página 12
Specifications STEAM HEATED MODEL Operating Steam Pressure............................ 15 PSIG (low pressure) 100 PSIG (high pressure) Supply Connection to Solenoid ................... 3/4” (1.91 cm) Return Connection ....................................... 1” (2.54 cm) Steam Consumption ..................................... 214, 265 BTU/HR - 6.4 BHP - 221 lbs. of condensate Drying Time (approximate) ......................... 75 lbs. dryweight - 70% water retention - 32 minutes Heat Capacity ...
Resumen del contenido incluido en la página 13
Motor List DOUBLE MOTOR MODELS Motor No. Voltage Hz. Phase Basket/Fan HP Amps RPM MTR203 115/200/230 60 1 B 1 10.4/5.2 1725 MTR212 200/230/460 60 3 B 1 3.8/1.9 1725 MTR206 110/220 50 1 B 1 12/6 1425 MTR104 240/415 50 3 B 1 3.1/1.8 1425 MTR104 220/380 50 3 B 3/4 2.6/1.5 1425 MTR104 220/380 60 3 B 3/4 2.4/1.4 1725 MTR104 200/346 50 3 B 3/4 2.6/1.5 1425 MTR101 575 60 3 B/F 1 1.7 1725 MTR209 115/208-230 60 1 F 1/3 5.2/2.6 1725 MTR218 208/230/460 60 3 F 1/3 1.6/.80 1725 MTR184 240/415 50 3 F 1/3 1.6/
Resumen del contenido incluido en la página 14
General Information & Grounding Instructions GENERAL The Cissell Dryer is so designed that when an operator opens the dryer door, the INFORMATION basket and exhaust fan stops. You can expect fast drying from a Cissell Laundry Dryer. Hot, dry air is properly and effectively moved through the basket and exhausted through a lint trap to the atmosphere. The Cissell Dryer comes equipped with an inclined, self-cleaning lint screen. In this system, lint accumulates on the underside of the screen until
Resumen del contenido incluido en la página 15
Grounding Instructions (Illustration) Page 15
Resumen del contenido incluido en la página 16
Piping Recommendations PIPING 1. Trap each dryer individually. Always keep the trap clean and in good working condition. RECOMMENDATIONS 2. When dryer is on the end of a line of equipment, extend header at least 4 feet beyond dryer. Install globe valve, union, check valve and by-pass trap at end of line. If gravity return to boiler, omit trap. 3. Insulate steam supply and return line for safety of operator and safety while servicing dryer. 4. Keep dryer in good working condition. Repair or repla
Resumen del contenido incluido en la página 17
Gas Piping Check gas rating plate for type of gas to equip the dryer. GAS PIPING INSTALLATION Check for altitude elevation of the dryer. Check utility for proper installation of gas supply line and gas pressure. NATURAL GAS ONLY Check the gas pressure inlet supply to dryer, 11” W.C. Pressure maximum. Check the manifold pressure 3.5” W.C. Pressure (Natural Gas). LP GAS ONLY 11” W.C. Pressure CAUTION Low gas pressure and intermittent gas will cause gas ignition problems. This will cause inadequa
Resumen del contenido incluido en la página 18
Gas Piping Installation (Illustration) The dryer and it’s individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 PSIG. The dryer must be isolated from the gas supply piping system by closing it's individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG. Page 18
Resumen del contenido incluido en la página 19
Gas Service Installation Instructions The size of the gas service pipe is dependant upon many variables, GAS SERVICE such as tees, lengths, etc. Specific pipe size should be obtained from INSTALLATION the gas supplier. Refer to the “Gas Pipe Size” chart in this manual for INSTRUCTIONS general gas pipe size information. CAUTION: Gas loop piping must be installed as illustrated to maintain equal gas pressure for all dryers connected to a single gas service Other gas-using appliances should be conn
Resumen del contenido incluido en la página 20
Gas Pipe Size Chart TOTAL BTU/HR GAS PIPE SIZE FOR 1000 BTU (250 KCAL) NATURAL GAS (for LP Gas correct AT 7” (17.8 CM) W.C. PRESSURE TOTAL total BTU/HR below by KCAL multiplying by .6) In figuring total length of pipe, make allowance for tees and elbows. HOUR (25 ft.) (50 ft.) (75 ft.) (100 ft.) (125 ft.) (150 ft.) 7,62 m 15,24 m 22,86 m 30,48 m 38,1 m 45,72 m 60,000 15000 3/4 3/4 3/4 3/4 3/4 3/4 20000 3/4 3/4 3/4 1 1 1 80,000 100,000 25200 3/4 3/4 1 1 1 1 30200 3/4 1 1 1 1 1 120,000 140,000 352
