Resumen del contenido incluido en la página 1
ASSEMBLY, CARE & USE MANUAL
WARNING & SAFETY INFORMATION
Masterbuilt Manufacturing, Inc.
MODELS 20040311, 20042711 KETTLE CHARCOAL GRILL
1 Masterbuilt Court
THIS PRODUCT IS FOR OUTDOOR USE ONLY
Columbus, Georgia 31907
Customer Service 1-800-489-1581
Approximate assembly time: 25 minutes
Tools required for assembly: Adjustable Wrench, Phillips Head Screwdriver.
CARBON MONOXIDE HAZARD WARNING
Burning charcoal gives off carbon This manual contains important
monoxide, which has no odor and can
Resumen del contenido incluido en la página 2
LIMITED WARRANTY INFORMATION GENERAL WARNING AND SAFETY INFORMATION Masterbuilt warrants its products to be free from defects in material and workmanship under proper assembly, normal use and recommended care for 90 days from the date of original retail purchase. • Keep a fire extinguisher accessible at all times while operating grill. • Never leave grill unattended while in use. Masterbuilt warranty does not cover paint finish as it may burn off during normal use. • Never use inside an enclose
Resumen del contenido incluido en la página 3
RECIPES PARTS LIST BBQ BURGERS 15 TANGY PEANUT-SAUCED RIBS 1 12 ¼ cup catsup 10 4 lbs meaty pork spareribs or pork loin back ribs 2 tbsp steak sauce ¼ cup hot water 1 tbsp water ¼ cup peanut butter 1 tsp sugar 2 tbsp lime juice 1 tsp vinegar 2 tbsp sliced green onion 14 1 clove garlic, minced ½ tsp grated fresh ginger or ¼ tsp ground ginger 16 1 lb lean ground beef ¼ tsp ground red pepper ¼ tsp salt 2 ¼ tsp black pepper 4 hamburger buns, split and toasted Trim fat from ribs. Cut ribs into 4-6 se
Resumen del contenido incluido en la página 4
HARDWARE LIST APPROXIMATE GRILLING TIMES BEEF SIZE GRILLING TIME INTERNAL TEMP 3 Steaks /4” (2cm) thick 3 to 4 min. /side med rare 145°F (62°C) 4 to 5 min. /side med 160°F (71°C) (C) (A) (B) Kabobs 1” (2.5cm) cubes 3 to 4 min. /side 145°-160°F (62-71°C) 3/16” 1/4-20x1/2" 3/16-24x3/8" 1 Phillips Head Screw Hex Lock Nut Hamburger patties /2” (12mm) thick 3 to 4 min. /side med 160°F (71°C)) Phillips Head Screw qty-4 qty-8 qty-4 Roast, rolled rump 4-6 lbs. (1.8-2.7kg) 18 to 22 min /lb. 145°-160°F
Resumen del contenido incluido en la página 5
FREQUENTLY ASKED QUESTIONS REGARDING CHARCOAL GRILLS DO NOT RETURN TO RETAILER For Assembly Assistance, Missing or Damaged Parts STOP! Call: MASTERBUILT Customer Service at 1-800-489-1581 or EMAIL us at Customerservice@masterbuilt.com. Q. My cooking grate has rust. How do I get rid of it? Seasoning will prevent rust and food from sticking. Season by applying a thin coating of solid vegetable shortening over the entire surface. Place cook
Resumen del contenido incluido en la página 6
ASSEMBLY INSTRUCTIONS GRILL OPERATION CAUTIONS • Avoid bumping or impacting grill. Before assembly read instructions carefully. • Keep your hands, hair and face away from burning charcoal. Tools needed for assembly: • This grill has an open flame. Be careful of loose hair and clothing during operation. They may catch fire. Adjustable Wrench Phillips Head Screwdriver • Use protective gloves when handling this grill or working with fire. Use protective gloves or long, sturdy fireplace B
Resumen del contenido incluido en la página 7
HOW TO USE QUICK START IGNITION SYSTEM ASSEMBLY INSTRUCTIONS Carefully reposition grill as shown. 17 Be careful not to chip/scratch porcelain. Read all instructions and warnings on charcoal bag and in manual before using. 11 E STEP 3. 1. Load three crumpled sheets of newspaper on top of grate inside ash can. Place ash can in position below grill. Note: Shelf may require tilting to place in 8 position. Legs may need to be spread apart 2. Pile charcoal directly above ash can on charco
Resumen del contenido incluido en la página 8
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 5. B STEP 7. 6 Note: Do not over tighten. Damper should Place heat insulations washers (H) on ash can 5 13 1 move freely. handle as shown. Insert handle (6) into ash can (5) and secure using aluminum flat washers (F) Attach air damper (13) to kettle lid (1) using and hex nuts (D). phillips head screw (B) and hex lock nut (C). H F D C STEP 8. STEP 6. 10 Insert lighting grate (18) into assembled ash Place heat insulation washers (H)
