Resumen del contenido incluido en la página 1
Operating Instructions (ENG)
FLOOR POLISHER
MODELS: SP13 SP17X
SP15 SP20X
SP17 SPDS20
SP20
Read these instructions before using the machine.
F
980100 04/24/06
Resumen del contenido incluido en la página 2
MACHINE DATA LOG/OVERVIEW MODEL______________________________ DATE OF PURCHASE ________________ SERIAL NUMBER____________________ YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ For the name and address of your dealer contact: Windsor Industries Phone Number: ___________________________________________________________
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS Machine Data Log/Overview. .........................2 Table of Contents ...........................................3 HOW TO USE THIS MANUAL How to use this Manual..................................4 SAFETY Important Safety Instructions.........................1-1 Hazard Intensity Level. ..................................1-2 Grounding Instructions...................................1-3 OPERATION / MAINTENANCE Technical Specifications ................................2-1
Resumen del contenido incluido en la página 4
HOW TO USE THIS MANUAL This manual contains the following sections: The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts - HOW TO USE THIS MANUAL lists include a number of columns of information: - SAFETY - OPERATIONS - REF – column refers to the reference number on the parts illustration. - MAINTENANCE - PART NO. – column lists the part - PARTS LIST number for the part. - QTY – column lists the quantity of the The HOW TO USE THIS MAN
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. ! WARNING: To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left outdoors, or
Resumen del contenido incluido en la página 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. ! CAUTION CAUTION - Hazards or unsafe practices which could result in min
Resumen del contenido incluido en la página 7
GROUNDING INSTRUCTIONS THIS PRODUCT IS FOR COMMERCIAL USE ONLY. ELECTRICAL: In the USA this machine operates on a one 15 amp nominal 120V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors. GROUNDING INSTRUCTIONS: This appliance must be grounded. If it should malfunction or break down, grounding provides a ! WARNING: path o
Resumen del contenido incluido en la página 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Construction Heavy-duty die cast aluminum deck with heavy-duty rubber bumper, tubular steel adjustable handle with die cast aluminum handle housing Motor SP13, SP15, SP17, SP20 1.0 hp SP17X, SP20X, SPDS20 1.5 hp Brush/Pad speed SP13, SP15, SP17, SP20, SP17X, SP20X 175 rpm SPDS20 175/300 rpm Electrical system 115 volts, 60 Hz Cable 50’ (15 m), 14/3, built in cord wrap Switches Dual levers with safety lock Wheels Two 5” (12.7 cm) dia.
Resumen del contenido incluido en la página 9
HANDLE INSTALLATION WHEN INSTALLING THE HANDLE ASSEMBLY, CHECK ORIENTATION OF THE CORD ASM AND CORD HOOK. HANDLE RECEPTACLE 4 5 6 MOTOR PLUG PIVOT DECK HOLE ASSEMBLY 3 2 1 SEE NOTE This must be installed by qualified personnel. Read all instructions thoroughly. The machine is shipped with handle unassembled. The machine is shipped with handle unassembled. Follow these steps for installation: 1. Remove handle and deck assembly from carton. 2. Attach handle assembly to base using hardware kit (47
Resumen del contenido incluido en la página 10
OPERATION CONTROLS 1. To adjust handle lock, tighten nut on handle while in the locked position. Optimum locking force and ease 1. Safety Lock – Prevents unintended operation of the of locking is accomplished when the locking lever machine. nut is set to a torque of 30 to 50 inch pounds in the locked position. 2. Switch Levers – Turns machine on/off. 2. Gap between clamp halves at the front should be to 3. Adjustment Handle – Allows the handle to be the gap in rear when the handle adjust bar is
Resumen del contenido incluido en la página 11
OPERATION DAILY MAINTENANCE ! CAUTION 1. Inspect power cord for wear. To prevent For indoor use only. electrical shock replace cords with frayed or cracked insulation immediately. To prevent possible damage to the floor when using the brush option, use water or other 2. Place machine in the storage position. approved cleaning solution while operating. When using the pad option, always keep the 3. Check pad condition. Change if soiled or torn. machine moving when in contact with t
Resumen del contenido incluido en la página 12
MAINTENANCE Please refer to the following to assist in selecting the SCRUB BRUSHES proper brush or pad for the work at hand. NOTE: All original equipment brushes are equipped UNCOATED FLOORS with “Perform Alert� ”. This feature will tell the operator when it is time to replace the scrub Aggressive Grit is a nylon fiber impregnated with brushes. “Perform Alert� ” brushes have pre silicone carbide grit. It grinds away stain, soil, and trimmed bright yellow tufts to indicate the length o
Resumen del contenido incluido en la página 13
TROUBLESHOOTING PROBLEM CAUSE SOLUTION Circuit breaker tripped in Machine will not run Check and reset. building. Power switch failure. Test switch for continuity and replace if necessary. Tripped circuit breaker. Reset. Faulty power cord. Replace. Replace. CAUTION: To reduce the risk of electrical shock, unplug the machine before opening fuse Fuse in motor is blown. holder. Fuse will only open under extreme conditions. Investigate cause before replacing. Electrical shock Equipment
Resumen del contenido incluido en la página 14
BRUSH/PAD DRIVER GROUP 3 3 1A 1B 2A-W 1C 1D 3-1 STORM POLISHER 980100 04/24/06
Resumen del contenido incluido en la página 15
BRUSH/PAD DRIVER GROUP SERIAL NO. REF PART NO. QTY DESCRIPTION NOTES: FROM 1A 02216 - PAD DRIVER, 13" POLISHER 1B 02396 - PAD DRIVER, 15" POLISHER 1C 02218 - PAD DRIVER, 17" POLISHER 1D 02219 - PAD DRIVER, 20" POLISHER 2A 02232 - BRUSH, 13" NYL.POL. W/CLT.PLT 2B 02233 - BRUSH, 13" NYL.SCRUB W/CLT.PLT 2C 02234 - BRUSH, 13" MILD GRIT W/CLT.PLT 2D 02235 - BRUSH, 13" AGG. GRIT W/CLT.PLT 2E 02236 - BRUSH, 13" POLYPRO W/CLT. PLT 2F 02447 - BRUSH, 15” NYL.POL. W/CLT.PLT 2G 02448 - BRUSH,
Resumen del contenido incluido en la página 16
FRAME GROUP 20 1 21 22 23 2 19 3 18A 18B 4 18C 18D 5 6 7 8 9 MOTOR ASM 10 8 SEE PG 3-5 11 14 15 12 17A 16 13 17B 17C 17D STORM POLISHER 980100 03/08/03 3-3
Resumen del contenido incluido en la página 17
FRAME GROUP SERIAL NO. REF PART NO. QTY DESCRIPTION NOTES: FROM 1 78447 1 TUBE ASSY, HANDLE ADJ 2 38290 1 HANDLE, POLISHER 3 57275 1 NUT, M10X1.5 HEX NYLOCK PLTD 4 51328 2 LINK, HANDLE ADJUST 5 87203 2 WASHER, 14MMID X 36MMOD 6 57276 2 NUT, PUSH FLAT RD .51D 7 89206 2 WHEEL, 5D X 1.25 X 13MMID GRY 8 87054 2 WASHER, M8 FLAT DIN125A PLT 9 70262 2 SCR, M8 X 20 HHMS PLTD 10 70135 2 SCR, M8 X 30 HHMS 11 730008 2 SPACER, .317ID X .5OD X .44LG 12 87067 4 WASHER, 5/16 LOCK INT STAR PLT 1
Resumen del contenido incluido en la página 18
MOTOR GROUP 6 2 4 4 1 1 5 3 12 12 11 11 SP13, SP15, SP17, SP20 SP17X, SP20X 10 7 8 9 12 11 SPDS20 STORM POLISHER 980100 03/08/03 3-5
Resumen del contenido incluido en la página 19
MOTOR GROUP SERIAL NO. REF PART NO. QTY DESCRIPTION NOTES: FROM 1 27884 1 COVER, MOTOR 2 500763 1 LABEL, STORM MAIN 3 53263 1 MOTOR, 1 HP 115V INDUCTION SPT13/15/17/20 4 70702 3 SCR, M5 X .8 X 15MM BLK INCLUDES ITEM 4, 1, 5 53264 1 MOTOR, 1.5 HP 115V INDUCTION 12, & 11 (SP17X/20X) 6 500764 1 LABEL, STORM DELUXE MAIN 7 27892 1 COVER, ASM, MOTOR 8 70700 8 SCR, M5 X .8 X 10MM PHMS BLK 9 53253 1 MOTOR, 115V 1.75 HP 175/300 RPM SPDS20 10 500765 1 LABEL, STORM DUAL SPEED MAIN 11 70723
Resumen del contenido incluido en la página 20
HANDLE GROUP 14 13 5 6 17 2 22 16 18 1 9 3 11 12 20 7 19 9 15 21 8 4 10 3-7 STORM POLISHER 980100 03/09/05
