Resumen del contenido incluido en la página 1
HOME CLEANING SYSTEM
MODEL NO. 175,8690290
CAUTION:
Read Instructions
and Rules for
Safe Operation
Carefully
For Household
Use Only
Save this
Manual for
Future Reference
555-3929
MJ_HLIAL- LI&C '.BUCK AND CO., Dept. D/731 CR-W, Sears Tower, Chicago, IL 60684
i
02_11Z141561i - 3929
0o0) PRINTED IN U,S,A,
Resumen del contenido incluido en la página 2
Read all instructions before using this cleaner. When using any electrical appliance, basic precautions should always be followed, including the following: WARNING -To reduce the risk of fire, electric shock, or injury: I, Do not leave cleaner when plugged into electrical outlet, Unplug from outlet when not in use and before servidng, 2, WARNING: TO AVOID ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN -- STORE INDOORS, 3. WARNING: DO NOT REMOVE GROUNDING PRONG FROM POWER CORD PLUG. Connect to a properly
Resumen del contenido incluido en la página 3
TABLEOF CONTENTS Additional Uses / Optional Accessories ................... page 8-9 Safety Instructions ........................................................... page 2 Trouble Shooting Chart ................................................ page 10 Warranty ........................................................................... page 3 Introduction ...................................................................... page 3 Exploded Views and Parts Lists ............................ page
Resumen del contenido incluido en la página 4
POWER ASSEMBLYOF RECOVERYTANK O0 wER HEAD RD AND SOLUTION TANK See Figure 2 1, Place Recovery Tal& into Solution Tank (align the word PLUG "VACUUM" on Recovery Tank with "VACUUM" on SHORT Solution Tank) and secure with Metal Latch. CORD RECOVERY HERE TANK 2, Insert the plug on the Short Cord from the Solution Tank into the Recovery Tank Power Head. ASSEMBW OF HOSE, WANDS, SHORT NOZZLE AND SOLUTION TUBING CORD See Figure 1 \ 1. Assemble the two Straight Wands. 2. Assemble the upper Straight Wand
Resumen del contenido incluido en la página 5
CARPET PREPARATION For best results prepare carpet for cleaning as follows: 1. Vacuum carpet to remove loose dirt before using Cleaner, 2. To remove stains and ground in dirt present in heavy traffic areas of the carpet, spray or rub Sears Heavy Traffic Fre- Trealanent (82833) into carpet before using Cleaner. Follow directions on the bottle. FILLING CLEANER WITH WATERAND FILLER CLEANING SOLUTION OPENING See Figure 4 1. Open lid of the Filler Opening. 2. Add Sears All In One Carpet Cleaner (8281
Resumen del contenido incluido en la página 6
TESTFOR SOLUTION SPRAY See Figure 6 1. Hold Floor Nozzle above floor level. 2. Pull Solution Release Trigger on Angled Wand. 3. Observe Floor Nozzle to make sure cleaning solu- tion is being sprayed evenly. (see DETAIL "A" ) NOTE: If solution is not being sprayed evenly, refer to Trouble Shooting Chart. CLEANING THE CARPET See Figures 7 & 8 Solution Dispensing Stroke: 1. Start at a corner (recommended). 2. Place Floor Nozzle so Suction Inlets are flush with carpet. 3. While exerting light pressu
Resumen del contenido incluido en la página 7
WHEN TO EMPTY RECOVERY TANK See Figure 9 RECOVERY During normal operation, your cleaner may stop recovering TANK solution from your carpet, When this occurs there are three check points to alert you: 1, An increase in motor noise, 2. No solution visibly being recovered by the floor nozzle. 3. No air coming from the exhaust port of your cleaner. When this occurs: 1. The Recovery Tank is full and the Float Valve in the Recovery Tank has been activated. The Recovery Tank should be emptied. or -- 2.
Resumen del contenido incluido en la página 8
METHOD ! TO EMPTYTHESOLUTION TANK See Figure 11 When cleaning is completed, both the Recovery Ta nk and the Solution Tank should be emptied prior to storage. Empty the Recovery Tank as described earlier. There are three methods of emptying the Solution Tank. Method 1: 1, Disconnect Short Cord from Recovery Tank. 2. Remove Recovery Tank from Solution 'rank and pour solution out of the Filler Opening. Method 2: 1. Place Floor Nozzle in bath tub or container, 2. Depress Solution Release Trigger and
Resumen del contenido incluido en la página 9
5. Bend top flap of Cardboard Collar inward, PAPERDUST BAG (20-5086) 6, Replace Power Head on unit being carefifl not to crush See Figure 15 Dust Bag or to deform flexible splash plate on Power This cleaner uses a disposable paper dust bag to trap and Head. collectdirt when used for dry pick up. It is very important that 7, Make sure the Pump Switch is turned "OFF" for Dry the disposable paper dust bag remain clean to allow air to pass Vacuuming. through it while trapping dirt, If the dust bag i
Resumen del contenido incluido en la página 10
USEAS A BLOWER See Figure 16 1. Insert Hose into the Exhaust Port of the Power Head. EXHAUST 2, Turn Power Switch "ON" and direct hose to area to be PORT blown. KENMORE SPRAYMATE ATTACHMENT MODEL NO. 2°83252 See Figure 17 Cleanmore Spraymate is an optional attachment for carpet cleaning. The Cleanmore Spraymate has a motorized beater brush which is especially good for difficult to clean areas of heavy traffic, Optional cleaning accessories may be purchased or ordered through ycn_rnearest Sears s
Resumen del contenido incluido en la página 11
PROBLEM POSSIBLESOLUTIONS * !, Neither vacuum motor nor pump motor 1, Be sure power switch is in "ON" position, runs. 2. Be sure power cord tsplugged In securely, 3. Check wall electrical outlet (by plugging in a known working electrical appliance), 2, Vacuum motor runs, but there Is no 1, Be sure Short Cord from Power Head to Solution Tank is spray at the nozzle. securely plugged Into receptacle on the Power Head, 2, Check that Solution Tank Isfull, 3, Be sure Pump Switch is in the "HI" or _LO"
Resumen del contenido incluido en la página 12
Resumen del contenido incluido en la página 13
SEARS HOME CLEANING SYSTEM -- MODEL 175.8690290 FIGURE A PARTSLiST (SEE PAGE 12 FOR EXPLODED VIEW) KEY PART NO, DESCRIPTION KEY PART NO. DESCRIPTION 1 644147-006 Handle Plate 31 663402o001 Quick Disconnect Valve_ 2 642337-002 Handle Screws (2) 32 640145-005 Separator Plate Screws (2) 3 542338-048 Handle Shroud w/Label 33 643565-022 Upper Container w/Filler Door 4 542315-015 Switch Cap 34 706405-303 Hex Nut 5 641798-003 Motor Housing Screws (2) 35 644802-001 Ground Lead Screw 6 643492-003 Female
Resumen del contenido incluido en la página 14
SEARSHOME CLEANING SYSTEM-- MODEL 175.8690290--_---_ 16 15 14 / 12 13 21 22 25 26
Resumen del contenido incluido en la página 15
NOTES
Resumen del contenido incluido en la página 16
Kenmore HOME CLEANING SYSTEM SERVICE Now that you have purchased your Kenmore Home Cleaning System, should a need ever exist for repair parts or service, simply contact any Sears Service Center. Be sure to provide all pertinent facts when you call or visit. MODEL NO. 175.8690290 Tile mod el number o f your Power Spray Cleaner will be located on the Power Head of the cleaner, HOW TO ORDERREPAIRPARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOL- LOWING INFORMATION: • PART NUMBER • PART DESCRIPT