Resumen del contenido incluido en la página 1
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
USER'S GUIDE
9500-P
2
Thank You
3
Safety Instructions
4-5
Product View
6
Assembly
6-16
Operations
17-19
Maintenance and Care
20
Troubleshooting
21
Replacement Parts
22
Accessories
23
Warranty
24
Product Registration
24
Consumer Care
Resumen del contenido incluido en la página 2
® ® Thanks for buying a BISSELL PROheat 2X CleanShot Deep Cleaner We’re glad you purchased a BISSELL ProHeat 2X CleanShot heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL ProHeat 2X CleanShot deep cleaner is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS ® ■ Unplug before attaching the TurboBrush . When using an electrical appliance, basic precautions should be observed, including the following: ■ Be extra careful when cleaning stairs. ■ Close attention is necessary when used by or near children. Read all instRuctions befoRe using ® ® ■ Always install tank float before any wet pickup operation. youR PRoHeat 2X cleansHot . SAVE THESE WARNING: To reduce the risk of fire, INSTRUCTIONS. electric shock, or in
Resumen del contenido incluido en la página 4
Product view ® CleanShot Spray Trigger Trigger ® Custom Clean Dial Heater Switch Power Switch Extra Long Power Cord Flex Hose Upper Handle Easy Carry Handle Heat Indicator Light Tank Carry Handle ™ ReadyTools Dial 2-in-1 Water Tank Lower Base ® CleanShot ™ Dry Aire ® Edge Sweep Brushes Easy To Remove Nozzle 4 www.bissell.com 800.237.7691
Resumen del contenido incluido en la página 5
Product view Spray Trigger Quick Release Cord Wrap Upper Hose Hose secure Rack Latch Crevice Tool Holder Lower Hose Rack Recline Pedal Cleaning fluid SmartMix Tank Keep plenty of genuine bissell 2X formula on hand so you can clean and protect whenever it fits your schedule. always use genuine WARNING: bissell deep cleaning to reduce the risk of fire and electric shock due to internal formulas. non-bissell component damage, use only bissell cleaning fluids intended cleaning sol
Resumen del contenido incluido en la página 6
Assembly Your ProHeat 2X CleanShot comes in 1. 2. three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. 1. slide upper handle onto lower handle. 2. screw 3 screws into the marked holes. 3. 4. 3. Place upper hose rack onto back of upper handle, and secure with screw. 4. Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place.
Resumen del contenido incluido en la página 7
Operations ® Custom Clean the custom clean feature automatically mixes hot tap water with the bissell formula. simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse) and the ProHeat 2X cleanshot Professional will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need. ® CleanShot the cleanshot feature gives you the ability to tack- le tough stains with the push of a button. cleaning solution is sprayed
Resumen del contenido incluido en la página 8
Operations ReadyTools™ dial this provides either floor cleaning or above floor cleaning with the turn of a knob. choose "tools" setting for stairs, upholstery and hard to reach areas and "flooR cleaning" for carpets area rugs and bare floors. ™ Scotchgard Protector carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. to help restore this important protection, only bissell offers deep cleaning formulas
Resumen del contenido incluido en la página 9
BRUSH SUCTION ——— ——— Operations Before you clean 1. Move furniture to another area if cleaning an entire room (optional). 2. Pick up all loose dirt, debris, and pet hair before deep cleaning. if you are cleaning just a small area of carpeting or less than a whole room, the ProHeat 2X may be used to vacuum the area before deep cleaning. be sure to keep the red filter screen in the 2-in- 1 tank lid free of lint so that suction is ATTENTION: maintained (see step 4 on page 17). some be
Resumen del contenido incluido en la página 10
Operations Carpet cleaning 1. 1a. 1. fill the 2-in-1 Water t ank. Remove the tank from the base of the machine by lifting up the tank carry handle. carry like a bucket to the sink. 1a. unlatch the top of the tank from the bottom by lifting up on the tank latch located on the back of the tank. 1b. Remove the top of the tank by lifting 1b. 1c. up on the handle. Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tan
Resumen del contenido incluido en la página 11
Operations Carpet cleaning continued 6. Plug into a proper outlet and turn the power 6. and heater switches to the on ( i ) position. allow 1 minute for the built-in heater to warm-up before cleaning. the ProHeat 2X will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning. 7. cleaning strokes. While pressing the trigger, make one slow forward wet pass and another one back. Caution: Power Switch Heater Switch Do not overwet. take care not
Resumen del contenido incluido en la página 12
Operations Keep plenty of genuine BISSELL Carpet cleaning continued 2X formula on hand so you 8c. lift the bottom portion of the tank; pour out can clean whenever it fits your dirty water in the sink through the triangular schedule. Always use genuine shaped opening in the corner of the tank. BISSELL deep cleaning formulas. Note: Check the red lint screen in Non-BISSELL cleaning solutions the top of the tank and clean if may harm the machine and necessary. You may notice hair & void
Resumen del contenido incluido en la página 13
Adsdfdd ghg bvh cvbbj jkn hnbj jkvh gcghhjj jhffhl kllgh Operations Cleaning with attachments Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! if using to clean uphol- stery, check upholstery tags. A. check manufacturer’s tag before clean- ing. “W” or “Ws” on the tag means you can use your ProHeat 2X. if the tag is coded with an “X” or an “s” (with a diagonal stripe through it), or says “dry clean onl
Resumen del contenido incluido en la página 14
Operations Cleaning with attachments continued 8. Remove and rinse tools in clean, running water. dry and replace in the tool caddy. 9. it is recommended that you suction clean 10. water from a bowl to rinse out the hose. 10. before replacing lift end of hose and stretch out to ensure all water is cleared from hose. 11. coil flex hose around the tool caddy. 12. empty 2-in-1 water tank and rinse out, following the instructions on page 12. 13. Return Readytools dial to floor setting. De
Resumen del contenido incluido en la página 15
Operations Stain removal Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. blot up liquids with an absorbent cloth or paper towels. White materials are recom- mended because certain dyes may bleed and make the stain worse. 2. gently scrape up any semi-solids with a spoon or spatula. do not use a knife or other utensil with sharp edges because it could damag
Resumen del contenido incluido en la página 16
Operations Hard floor cleaning WARNING: Your ProHeat 2X model may have come with a hard floor attachment to reduce the risk of fire and 2X Hard Floor Solutions Formula. and electric shock- when If not, these products are available cleaning a hard floor, the for purchase by contacting the BISSELL bissell hard floor tool Consumer Care department by phone 203-5642 must be used or at the website. The hard floor tool and it must only be used provides effective cleaning for linoleum, wi
Resumen del contenido incluido en la página 17
Maintenance and care Machine storage once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. the formula WARNING: tank can remain filled and ready to go. to reduce the risk of fire, Note: Store cleaner in a protected, electric shock or injury dry area. Since this product uses unplug from outlet before water, it must not be stored where servicing. there is a danger of freezing. Freezing will damage internal components an
Resumen del contenido incluido en la página 18
Maintenance and care Machine care continued 6. the inside of the end caps by the brush WARNING: rolls can be wiped out with a clean paper to reduce the risk of fire, towel, or, if a more thorough cleaning is electric shock, or injury,turn desired, the end caps can be taken off power off and disconnect using a Phillips head screwdriver and plug from electrical outlet rinsed clean. Replace after cleaning. before performing mainte- 7. any loose hair or debris can be pulled from n
Resumen del contenido incluido en la página 19
Maintenance and care Brush removal and large belt replacement Brushes can be removed for cleaning or replacement as needed. WARNING: 1. follow small belt removal instructions on to reduce the risk of fire, page 18. electric shock or injury 2. Remove brush rolls by pulling them off unplug from outlet before of the metal rods. servicing. 3. Place cleaned or new brush rolls back 2. 3. onto the rods. make sure one washer is on each end of the rollers prior to sliding onto the rod. b
Resumen del contenido incluido en la página 20
Troubleshooting Built-in heater ready light does not illuminate Possible causes Remedies 1. The heater switch is not turned ON ( I ) 1. Turn the heater switch ON ( I ) 2. The power switch is not turned ON ( I ) 2. Both switches must be ON ( I ) to activate the heater ready light Reduce Spray or No Spray Possible causes Remedies 1. Water tank may be empty 1. Fill heavy duty bladder with hot tap water 2. Formula tank may be empty 2. Fill formula tank with BISSELL 2X Formula for cleaning
