Resumen del contenido incluido en la página 20
Child Seat Functions Harness Height Adjustment 1 Loosen the harness. b a Lift harness adjuster lever b Pull both harness straps forward a 2 Squeeze the harness height adjuster, slide the harness into the desired position and release. * Ensure the harness has locked into position. NOTE: In rear-facing mode, always position the harness straps at or below your child’s shoulders. See page 6. In forward-facing mode, always position the harness straps at or above your child’s shoulders. See pag
Resumen del contenido incluido en la página 1
TM
Boulevard 70 CS
User Guide
IMPORTANT: Thoroughly read and follow all instructions before installing
this child seat. Store this user guide in the pocket behind the cover (See
features pages for reference).
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Table of Contents Safety Information .......................................................................................2 Warnings ...............................................................................................................2 Important Notes ....................................................................................................4 Certification ...........................................................................................................5 Registr
Resumen del contenido incluido en la página 4
Section Title W ARNING! DEATH or SERIOUS INJURY can occur: • Use only in a rear-facing position when using it with an infant weighing less than 20 lbs (9.1 kg) OR is less than 1 year of age. • Use only with children who weigh between 5 and 70 lbs (2.3 – 31.8 kg) and whose height is 49 in. (124.5 cm) or less. Use rear- facing for children who weigh between 5 and 40 lbs (2.3 – 18.1 kg). Use forward-facing for children who weigh between 20 and 70 lbs (9.1 – 31.8 kg) AND are at least 1 year of a
Resumen del contenido incluido en la página 5
Section Title • This child seat must not be used in the home, in boats, or other non-certified applications. • Based on crash statistics, the National Highway Traffic Safety Administration (NHTSA) recommends that parents select the back seat as the safest location for a properly installed child seat. Please study Vehicle Seating Positions on page 13 to ensure your child’s safety and consult your vehicle owner’s manual. • Secure this child seat even when it is not occupied. In a crash, an u
Resumen del contenido incluido en la página 6
Safety Information Important Notes • Verify that the child seat is securely installed and the harness is properly adjusted around the child each time the child seat is used. • Discontinue use of this child seat if it has been in a moderate or severe crash. It is not necessary to replace a car seat after a minor crash defined by the U.S. National Highway Traffic Safety Administration (NHTSA) as: * The vehicle is driveable from the crash site. * The vehicle door nearest the child seat was not
Resumen del contenido incluido en la página 7
Safety Information Certification This child restraint system conforms to all applicable Federal Motor Vehicle Safety Standards. This Restraint is Certified For Use in Motor Vehicles and Aircraft. Registration Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, e-mail address if available and the restraint’s model number and manufacturing date to Britax Child Safety, Inc. P.O. Box 91167 Allentown, PA 18
Resumen del contenido incluido en la página 8
1 inch 2.5 cm Safety Information Important Child Seat Usage Information All infants must ride rear-facing at least until they have reached 1 year of age and weigh 20 lbs (9.1 kg). An infant positioning insert may be necessary for small infants to achieve a snug fit if the child is under 12 lbs and the lowest harness slots fall above the infants shoulders. The Infant positioning insert is sold separately at select retailers and on www.britaxusa.com. Britax advises that parents strongly consi
Resumen del contenido incluido en la página 9
Safety Information Forward-Facing: 20 – 70 lbs (9.1 – 31.8 kg) and at least 1 year of age WARNING! FORWARD-FACING use of this child seat is ONLY for children who meet ALL of the requirements below. If the child cannot be secured within these requirements because they are too large, another type of child seat (such as a booster) may be required. If the child cannot be secured within these requirements because the child is too small, review the rear-facing information on page 6. Use forward
Resumen del contenido incluido en la página 10
Vehicle Compatibility Compatible Vehicle Seat Belts NOTE: The information in this section only applies to installation with vehicle seat belts. Vehicle seats and seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s manual for specific information about your vehicle seat belts and their use with child seats. Lap-Shoulder (3-Point) Belt 1. ALR (Automatic Locking Retractor) with Sliding Latch Plate a Has a latch plate that freely slides along the vehicle seat belt webbin
Resumen del contenido incluido en la página 11
Vehicle Compatibility 2. ELR (Emergency Locking Retractor) with Locking Latch Plate a Has a latch plate that locks the vehicle belt. * This type of latch plate locks the vehicle belt when the vehicle belt and latch plate lie flat. When using this Latch type of vehicle belt with a plate child seat, ensure the latch plat and vehicle belt lie flat against the child seat or the vehicle belt may remain unlocked. b Has a retractor that locks only in an emergency situation such as sudden s
Resumen del contenido incluido en la página 12
Vehicle Compatibility 4. ELR (Emergency Locking Retractor) with a Sliding Latch Plate a Has a latch plate that freely slides along the vehicle seat belt webbing. b Has a retractor that locks only in an emergency situation such as sudden stop or crash. IMPORTANT: This belt type requires the use of the lock-offs built into the seat for rear- and forward-facing installations. See page 21 for information on using the lock-offs. Lap Belt 5. ALR (Automatic Locking Retractor) a Has a latch plat
Resumen del contenido incluido en la página 13
Vehicle Compatibility c Tightens by feeding the belt webbing back into the retractor. Locking Latch Plate 6. a Has a latch plate that prevents the webbing from becoming loose. Latch plate b Tightens by pulling on the Adjuster belt webbing. 11
Resumen del contenido incluido en la página 14
Vehicle Compatibility Incompatible Vehicle Seat Belts WARNING! The following types of vehicle seat belts are NOT compatible with this child seat. If any of the belt types listed below are in the chosen seating position, choose another vehicle seating position or check your vehicle owner’s manual for information on installing a car seat in your vehicle. 1 Lap-shoulder belts 2 Motorized, 3 Lap-shoulder with top or bottom automatic vehicle belts that have a anchor points on seat belts. separa
Resumen del contenido incluido en la página 15
Vehicle Compatibility Vehicle Seating Positions WARNING! DO NOT place child seat rear-facing in the front seat of a vehicle with a passenger air bag unless deactivated. DEATH or SERIOUS INJURY can occur. See your vehicle owner’s manual for child seat installation instructions. The back seat is the safest place for children 12 and under. Some vehicles have no seating positions which are compatible with this child seat. If in doubt, contact the vehicle manufacturer for assistance. Forwar
Resumen del contenido incluido en la página 16
Child Seat Features 1 2 3 4 13 14 5 15 6 16 17 7 18 19 8 20 9 21 10 11 12 1 Cover 10 Lower Connector Adjuster (LATCH component) 2 Harness Height Adjuster 11 Lower Connector Release 3 Head Restraint Button (LATCH component) 4 Comfort Pads 12 Lower Connector (LATCH 5 Infant Body Pillow component) 6 Harness Holder 7 Lower Connector Bar 13 User Guide Storage (in 8 Lower Connector Strap pocket behind cover) (LATCH component) 14 HUGS™ (Harness Ultra Guard 9 Lower Connector Adjuster System) Ch
Resumen del contenido incluido en la página 17
Child Seat Features 1 30 22 23 24 25 26 27 31 32 28 7 33 29 34 17 Belly Pad 26 Forward-Facing Lock-Offs (Red – under cover on front of shell) 18 Harness Adjuster 27 Rear-Facing Lock-Offs (Blue – Lever (under cover) under cover on front of shell) 19 Click & Safe™ Snug Harness 28 Rear-Facing Belt Slot Indicator (under cover) 29 Base 20 Harness Adjuster Strap ® 30 Versa-Tether (Top Anchorage 21 Recline Adjustment Handle Strap - LATCH component) 22 Shell 31 Harness Yoke 23 Serial Number & Manu
Resumen del contenido incluido en la página 18
1 inch 2.5 cm Child Seat Functions Click & Safe™ Snug Harness Indicator ImpoRtANt: See pages 55 – 57 for detailed instructions on securing your child. The Click & Safe is an audible indicator to help determine when the child seat harness is within range of appropriate snugness. The Click & Safe is a secondary feature. Parents should be aware of what amount of snugness is appropriate in the harness. The harness should have a comfortable but snug fit around the child. A snug strap should not
Resumen del contenido incluido en la página 19
Child Seat Functions 3 Remove slack in the harness from around child’s upper thighs. 4 Remove slack in the harness between the HUGS™ chest pads and buckle. 5 Pull the harness adjuster strap up until a click is heard. The Click & Safe™ indicator will click when the harness is within range of appropriate snugness. Checklist 9 Check that the harness is buckled and secure. 9 Check that the harness is snug and you can not pinch excess. NOTE: If there is still slack in the harness, return to
