Resumen del contenido incluido en la página 1
Just-Like-Mine!
Doll or Stuffed Toy
Booster Seat
Instruction Manual
These instructions are for the
following Joovy Style #’s:
012, and 013
Please read this instruction manual completely before using
your doll booster seat. Keep these instructions for future reference.
Joovy • 2919 Canton Street • Dallas, TX 75226 • (877) 456-5049 • Fax: (214) 761-1774
E-mail: customerservice@joovy.com • Website: www.joovy.com
Page 1
Doll or Stuffed Toy Booster Seat Instruction Manual
Resumen del contenido incluido en la página 2
! WARNINGS • This product is a TOY car booster for dolls or stuffed toys ONLY. • NEVER use this toy to carry a baby or child for any purpose whatsoever. • NEVER use this toy to hold a baby or child in a vehicle. Death or Serious Injury may occur. • NEVER leave the doll booster unsecured in a vehicle. An unsecured doll or doll booster can be thrown around and may injure you or your child in a sharp turn, sudden stop, or accident. • Discard this product if it is ever involved in an actual
Resumen del contenido incluido en la página 3
Assembling and Using your Doll Booster Seat To insure safe operation of your doll booster, please follow these instructions carefully. Unpacking the Product • Carefully remove doll booster from the box and plastic bag. • Discard all packaging materials properly. Do not allow children to play with them. Positioning the Shoulder Straps • Place doll or stuffed toy in doll booster on top of the safety harness. • Determine which pair of shoulder harness slots is even with or just above the
Resumen del contenido incluido en la página 4
• Bring the seat belt around the doll’s waist and insert the male end of each waist strap buckle into the female buckle. Insure that they snap into place. See Figure 3. Tighten the waist belt to be snug around the doll’s waist. • Buckle the harness clip pieces together. See Figure 4. Position the harness clip in the middle of the doll or stuffed toys’ chest, level with the armpits and away from the neck. • Both the shoulder straps and the waist straps may be adjusted using the sliding
Resumen del contenido incluido en la página 5
Installing the Doll Booster Using Vehicle Belts To install the doll booster in a vehicle, you must carefully follow the instructions provided by your vehicle manufacturer in addition to the information in this manual. Before proceeding, be sure you have read and understand all of the instructions in this section. • Place the booster in a forward-facing position in the vehicle seat. • Thread the vehicle seat belt through large oval opening on the side of the booster behind the backrest, a
Resumen del contenido incluido en la página 6
Acceptable Vehicle Belt Systems The following belt systems are acceptable for use with your doll booster seat. You should refer to your vehicle owner’s manual to determine which type of seat belts your vehicle has. • Lap Belts-Manually Adjusted: When buckled, the belt is tightened manually by pulling on the excess belt while pushing down hard on the doll booster. • Lap Belts with Automatic Locking Retractor (ALR): The automatic locking retractor will not allow the lap belt to lengthen
Resumen del contenido incluido en la página 7
Unacceptable Vehicle Belt Systems DO NOT use any of the following systems to secure the doll booster. • Lap Belts with Emergency Locking Retractor (ELR): This lap belt stays loose and can move until it locks in a sudden stop or crash. • Combination Lap/Shoulder Belt with Retractor: Each strap has a retractor at one end and is attached to the latch plate at the other end. • Passive Restraint-Lap or Shoulder Belt Mounted on Door • Passive Restraint-Lap Belt with Motorized Shoulder Belt •
Resumen del contenido incluido en la página 8
WARNINGS • ONLY use to attach TOY doll products to vehicle LATCH anchors. • DO NOT use for actual child car seat or other restraint system. • Discard this product if it is ever involved in an actual vehicle accident. • DO NOT allow children to play with this product. Maintenance The locking mechanism and all plastic parts on the Doll Booster Seat should be inspected periodically to insure that they are secured properly and not damaged or malfunctioning. The safety harness, fabric items and th
Resumen del contenido incluido en la página 9
Page 9 Doll or Stuffed Toy Booster Seat Instruction Manual
Resumen del contenido incluido en la página 10
2919 Canton Street • Dallas, TX 75226 • (877) 456-5049 • Fax: (214) 761-1774 E-mail: customerservice@joovy.com • Website: www.joovy.com ©Joovy 2005 • Document Version 1.0 Page 10 Doll or Stuffed Toy Booster Seat Instruction Manual
