Resumen del contenido incluido en la página 1
Combi Ninna Nanna PA-138V
Soft carrier for cradling, cuddling and back-carrying
Instruction Manual
Pleasereadtheuserguideanduseaccordingly.Afterreading,storetheuserguide
properly for future reference.
Also attach this user guide when giving the product to the others.
Head support is only used after baby's
neckmusclehasdeveloped.Storeproperly
at a safe place if removed from pocket.
*Head support is stored inside pocket in sales package.
Resumen del contenido incluido en la página 2
Before use For safe use of our product Before use Caution about safety Thank you for purchasing Combi Ninna Nanna PA-138V baby soft carrier. The caution items mentioned here are about how to use the product This product is a generic single-baby carrier designed for cradling, properly and safely so as to prevent any possible injury to user and cuddling or back-carrying a baby during shopping or outdoor activities. baby and any damage to the product. Moreover, the caution items are Before use, ple
Resumen del contenido incluido en la página 3
Before use WARNING Make sure to secure the following parts when use. Otherwise baby Please try as much as possible to tighten the may fall off from carrier accidentally while in use. following belts. Any gap in between baby and user may cause baby to fall off from the carrier < Cradling > while in use. Head guard hook • Head guard hook (2, left and right) (2, left and right) • Safety belt • Side lock, Side snap •Waist belt • Safety buckle Side lock, ※Please attach cradling support Side snap seat
Resumen del contenido incluido en la página 4
Before use WARNING Please seat or unseat baby at a safe place When the carrier is in use, please do not In cradle or cuddle position, always support (a third party aid preferred) to avoid the baby run, jump, lean forward for more than 45 baby with your hands. Baby's unexpected may falling off accidentally. degree, or lean to the side. Otherwise, baby movement may cause it to fall off from the may accidentally fall off from the carrier. carrier. Cradle position is not applicable to the In cradle
Resumen del contenido incluido en la página 5
Before use CAUTION Do not try to unpick stitched belt Please do not use the carrier Stop using the product Remove "Cradling support ends or re-structure the product. continuously for more than 2 immediately in case of any seat" when cuddling baby. Otherwise, damage or accident hours, or within 30 minutes after damage of product is found. Otherwise the support seat may be caused while in use. breastfeeding. Otherwise, may press on baby's head. unexpected burden will be inflicted to user or baby.
Resumen del contenido incluido en la página 6
Before use Name of parts Head support Hook attachment ring (female) (Detachable) ● For attachment of cradling support ● Stored inside seat and head support. pocket Safety belt Head support hook (male) Combi ladder buckle(1) Shoulder belt ● For adjustment of safety Side lock Safety buckle belt Cradling support Side snap Pocket Combi buckle seat attachment ● For cuddling. To hook Velcro (female) be stored when back-carrying or Adjusting zipper cradling. Adjusting snap ● To be used according to Wai
Resumen del contenido incluido en la página 7
(from birth until neck muscle developed) Cradle position Preparation for cradling Adjust waist belt length Before seating baby, carry the soft carrier along ● To adjust the shoulder as illustrated and adjust waist belt Release crotch snap and pull out waist belt with Combi ladder buckle ➁ . Combi buckle and Combi ladder buckle ➁ . Lift the end of should be in open position and stored inside Combi ladder buckle ➁ and adjust waist belt shoulder strap. length. Waist belt is made twisted to better f
Resumen del contenido incluido en la página 8
(from birth until neck muscle developed) Cradle position To seat baby whose neck muscle is yet to develop Release the safety buckle Release the side snap and side Seat the baby 1 2 3 Open carrier at a safe place and seat lock. Safety buckle baby inside. Make sure baby's head is To release side lock, slide the side lock not leaning too tight against head guard. male toward the bigger end of the side lock female. Side lock male Side snap Side lock female Check if the carrier fits baby Set the head
Resumen del contenido incluido en la página 9
(from birth until neck muscle developed) Cradle position Secure side lock and side snap Secure safety buckle 4 5 If baby's head is being pressed by head guard, To secure side lock, place the side lock Secure safety buckle until heard the "click" seat baby deeply as much as possible into the male into the bigger opening on side lock sound. seat. female and slide upward to secure it. (Refer to step 2) Click Safety buckle Click Side lock Side snap WARNING Check to make sure "side lock", "side To se
Resumen del contenido incluido en la página 10
(from birth until neck muscle developed) Cradle position To cradle baby whose neck muscle is yet to develop In case of baby with smaller body size, it is recommended to secure the adjustment zipper and apply the cradling support seat to Advice use. (Adjustment zipper is normally open in cradle position.) Belt is regarded too long if the illustrated angle Seat and cradle baby Support baby with hands 1 2 of the supporting hand is bigger than 90 Put on shoulder strap across shoulder Use hands to su
Resumen del contenido incluido en la página 11
(from birth until neck muscle developed) Cradle position To unseat baby from cradle position Put down baby and then put off Release the left and right head 1 2 To release head guard hook shoulder strap guard hooks Lift the head guard hook to the outer Support baby with hands and put down side. Press on the front end of head baby at a safe place. Put off shoulder guard hook with a thumb and then strap. Head guard hooks slide the hook attachment rings to the side to release it. Hook Head attachmen
Resumen del contenido incluido en la página 12
(from birth until neck muscle developed) Cradle position To remove cradling support seat Cradling support seat is already attached while in sales package. Follow the steps below to remove cradling support seat for washing, or when changing to use in cuddle position. Release 2 crotch snaps Release Velcro on pockethooks. Release attachment snapR 1 2 3 Attachment snaps Pocket Crotch snaps Cradling support seat Velcro Hold on the upper side of seat pad Release Velcro on ANYO RAKU 5 4 and pull it out
Resumen del contenido incluido en la página 13
(After neck muscle developed up to around 12 months) Cuddle position Preparation for cuddling There are 2 ways to cuddle a baby¨: ① seating baby first before putting on carrier, or ➁ putting on carrier first before seating baby. Advice Please choose whichever way that suits your need. Adjust the length of the waist belt Adjust seat depth with adjustment zipper. Apply head support ● Close adjustment zipper to use ● Open adjustment zipper to use ● Remove cradling support seat after baby's When bab
Resumen del contenido incluido en la página 14
(After neck muscle developed up to around 12 months) Cuddle position Preparation for cuddling Seating baby before putting Seat baby into carrier and secure Adjust waist belt length 1 side lock and side snap Adjust waist belt length with Combi ladder buckle ➁ to fit user before seating baby. Seat baby at a safe place. Combi ladder buckle➁ Side lcok Waist belt is made twisted to better fit user's body. Secure Combi buckle Waist Side snap Belt Twisted Click WARNING • Check to make sure "side lock",
Resumen del contenido incluido en la página 15
(After neck muscle developed up to around 12 months) Cuddle position on carrier Secure safety buckle Secure head support To secure head support hooks 2 3 Secure the safety buckle until a "click" Secure head support hooks onto the hook Lift head support hook and place it above hook sound is heard. attachment ring on shoulder belt. attachment ring. Press the front end of the hook (Baby whose neck muscle has developed until it clicks into place. can use head support up to around 7 Safety buckle mon
Resumen del contenido incluido en la página 16
(After neck muscle developed up to around 12 months) Cuddle position Putting on carrier before seating baby Put on carrier Seat baby into carrier WARNING 1 2 Put on shoulder strap and cross hands User should sit down first. Seat baby into • Make sure "side lock", "side snap" and to the back to secure Combi buckle until carrier from either side while holding the "safety buckle" are secured to prevent a "click" sound is heard.. baby with on hand. baby from accidentally falling off while in use. •T
Resumen del contenido incluido en la página 17
(After neck muscle developed up to around 12 months) Cuddle position To unseat baby from cuddle position Secure side lock and side snap. 3 Release Combi buckle Place baby on a safe place and 1 2 Sit on a safe place. Support baby with release head support one hand and release Combi buckle Side lock Lift the head support hook to the outer side. Press on the front end of head support hook with a thumb and then detach the hook attachment ring. Release Combi buckle Side snap Hook attachment Head supp
Resumen del contenido incluido en la página 18
(After neck muscle developed up to around 30 months) Back-carry position Back-carrying Preparation for back-carrying As baby is not seen in back-carry position, it is recommended to unseat baby and Advice check baby's status once every 30 mins. WARNING Adjust waist belt length • Make sure "side lock", "side snap" and "safety buckle" are secured to prevent Store Combi buckle into shoulder strap and adjust ● To adjust baby from accidentally falling off while waist belt with Combi ladder buckle ➁ t
Resumen del contenido incluido en la página 19
(After neck muscle developed up to around 30 months) Back-carry position Seat baby into carrier. Secure side Secure safety buckle Set the head support 1 2 3 Secure safety buckle until a "Click" sound Secure the head support hooks onto the lock and side snap is heard. hook attachment rings on the shoulder Side lock belt. Safety buckle Head support Head support hook Click Side snap Refer to "To secure head support hooks" (P.14) Hook attachment rings for detailed operation. Carry baby on the back A
Resumen del contenido incluido en la página 20
(After neck muscle developed up to around 30 months) Back-carry position To unseat baby from back-carry position Release waist buckle Unload carrier from back Place baby on a safe place and 1 2 3 release head support Lift the head support hook to the outer side. Press on the front end of head support hook with a thumb and then detach the hook attachment ring. Hook Head attachment support hook ring Waist buckle Release side lock, side snap and Release safety buckle 4 5 then unseat baby. Side lock
