Resumen del contenido incluido en la página 1
PRECISION 5500
VEHICLE SECURITY SYSTEM
WITH REMOTE START
PRECISION 2200
REMOTE START ONLY
PRODUCT MANUAL
Resumen del contenido incluido en la página 2
Limited Lifetime Warranty This system is warranted to the original purchaser, to be free from defects in material and workmanship. The manufacturer will repair or replace at its option, and free of charge for the first twelve (12) months, any part that proves defective in material or workmanship under normal installation, use, and service, provided the product is returned to the manufacturer freight prepaid. After the first 12 month warranty period there will be a maximum service charge of $2
Resumen del contenido incluido en la página 3
Table of Contents 1. About Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1 2. Remote Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2 Remote Transmitter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3 Adding/Replacing Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
About Your System The ScyTek Precision 5500 Series is a Combination Vehicle Security and Remote Starting System that will have features and functions that will be described in the following sections with an ASTERICK * The Precision 2200 Series is a Remote Start System only. Both series feature a built-in "ScyNet Network Port" that allows direct connection of optional accessory modules and a PC interface offering expanded system operation. With proper installation this system will provide sup
Resumen del contenido incluido en la página 6
Remote Transmitters Standard Remote Transmitter Description LED Button 1 Button 2 Button 3 Button 4 Button 5 The Precision 5500, 2200 Series is supplied with one 5-button Remote Transmitter that is used to control the system’s operations. Note: Using the optional PC or Pocket PC interface with the network software, it is possible to reconfigure the functionality of the transmitter buttons. The standard (default) setting for operation of the transmitters is described below. Button 1 Arms* a
Resumen del contenido incluido en la página 7
Adding/Replacing Standard Remote Transmitters To replace lost or stolen transmitters or to add additional transmitters into the system, have all desired transmitters ready and follow the steps below. Note: Up to 4 one-way transmitters can be programmed to operate the system. Any previously stored transmitter will be erased if it is not programed within the following sequence To program the transmitter(s): 1. Turn the ignition key On, Off, On, Off, and back On. (Key On 3 times) · 3 seconds
Resumen del contenido incluido en la página 8
2-way LCD Remote Transmitter Description Button 1 Button 2 Button 3 Button 4 Button 5 The Precision 5500 and 2200 are supplied with a 2-way LCD remote transmitter, offering increased range and confirmation of any activated features. Page 1 Button 1 Arms* and Locks the system and when held for 5 seconds, activates the system’s Panic feature. Button 1 also locks the doors when the system is in Valet Mode. Button 2 Disarms* and Unlocks the system. Pressing Button 2 again operates the Passenger
Resumen del contenido incluido en la página 9
3. Press and release Button 1 on the first transmitter, then on the second transmitter. · The siren*/horn will chirp/honk once for every transmitter learned. 4. Turn off the ignition key. 5. The siren*/horn will chirp/honk 3 times to indicate the system has exited programming mode. LCD Transmitter Battery Replacement Your Precision Remote Transmitter uses a 1.5 volt AAA alkaline battery, which will require replacement in time. Depending on the amount of use, the battery may last up to 3 mont
Resumen del contenido incluido en la página 10
To set the daily start feature: 1. Press and hold Buttons 2 and 3 until the remote beeps four times. · The fan and clock will be shown indicating daily start mode is entered. 2. Press Button 2 until the desired hour is displayed. 3. Press Button 3 until the desired minute is displayed. The button may be held down to scroll faster. 4. When the desired time is displayed, press Button 5 to store. · The remote will beep 3 times to indicate the daily start function has been set. To disable the daily
Resumen del contenido incluido en la página 11
CHP Set the siren*/horn confirmation chirps*/honks ON or OFF: 1. Press and hold Button 5 until the display shows CHP. ·The transmitter will beep three times. 2. Release Button 5. · The transmitter will beep once. · The LCD panel will show a siren if the chirps*/honks are enabled or "off" if the chirps*/honks are disabled. snd sound function selects the transmitter's confirmation mode - Tone or Vibration mode. Set the transmitter confirmation tones ON or OFF: 1. Press and hold Button 5 until th
Resumen del contenido incluido en la página 12
Page 8 - Precision
Resumen del contenido incluido en la página 13
System Operation Remote Arming*/Locking The system monitors 5 independent areas (zones) while armed: doors, hood/ trunk, shock sensor, optional sensor input, and the network port for future expansion.* To Arm* and Lock the System: 1. Turn off the ignition. 2. Press Button 1. · The siren*/horn will chirp/honk once. · The doors will lock.( if the keyless entry feature was installed) · The parking lights will flash once. · The LED will turn ON, to indicate the starter defeat is activated.* 3. 1
Resumen del contenido incluido en la página 14
* Tamper Alert If the system was triggered while away, the LED will flash to indicate which zone triggered the system after disarming and turning on the ignition. The LED indication will repeat 5 times. LED Flashes: 1 flash = optional sensor 2 flashes = shock sensor 3 flashes = network based sensor 4 flashes = door 6 flashes = hood/trunk example: flash-flash-pause-flash-flash-pause = shock sensor Silent Arming/Disarming The Precision 5500 and 2200 Series system can be programmed to operat
Resumen del contenido incluido en la página 15
Panic Mode In the event of an emergency, the transmitter’s remote Panic feature can be used to instantly trigger the alarm*/panic feature. To activate the Panic Mode: 1. Press and hold Button 1 for 5 seconds. · The alarm will sound. · The parking lights will flash. · The doors will unlock** allowing access to the vehicle. 2. Press Button 1 or 2 to stop Panic Mode. * If the ignition is on when the Panic feature is activated, the doors will lock for personal safety. If not deactivated using Butt
Resumen del contenido incluido en la página 16
To set the Emergency Override Code: 1. Turn on ignition. 2. Within 5 seconds, press the valet switch 5 times. · The siren will provide one long chirp, indicating that you have entered Programming. 3. Press the valet switch 4 times. · The siren will chirp each time the valet switch is pressed. 4. Within 5 seconds, press Button 3 on the transmitter. · The siren will chirp 3 times. 5. Press the valet switch the number of time equal to the desired code (from 1-15). 6. Turn off the ignition then arm
Resumen del contenido incluido en la página 17
Remote Start Features Remote Starting To Remote Start the System: 1. Be sure the system is not in Valet Mode. 2. Press and hold Button 4 for three seconds. · The parking lights will flash 4 times and turn on. · The siren*/horn will chirp/honk 4 times.( if enabled, see page 23 branch 9 for 5500 Series) ( if enabled, see page 25 branch 22 for 2200Series) · The engine will start and run for the duration of its programmed Run Time.** · The heater or air conditioner will turn on (if turned on pri
Resumen del contenido incluido en la página 18
Automatic Start Mode Automatic Start feature has three modes that will start the vehicle every one or two hours within a 24 hour period. 1. Timer Only Mode (factory default) The Automatic Start feature starts the vehicle automatically every one or two hours and runs for the preset Run Time. (15 or 25 min) Auto Start On Timer Mode: 1. Turn Ignition switch Off and wait for 3 seconds. 2. Turn Ignition switch On and Off three times ending with Ignition in Off position 3. Press the Valet switch imme
Resumen del contenido incluido en la página 19
Manual Transmission Remote Start Features Model: Precision 5500-M Precision 2200-M 1- Tach wire must be connected , The system must learn RPM. 2- Hand brake must be connected. 3- Door trigger must be connected 4- Clutch override installed NOTE: MUST USE RELAY, SEE PAGE 28. Remote Starting With engine running and Hand-brake engaged put the vehicle transmission in neutral and remove the foot from the brake pedal, press the remote start button on your transmitter, parking lights will flash t
Resumen del contenido incluido en la página 20
Extended Features Ignition Door Locking For added safety, the Ignition Door Locking feature allows vehicles equipped with power door lock systems to automatically lock the doors when the ignition is turned on. If a door is open when the ignition is turned on, the Ignition Door Locking feature is disabled to protect against locking the keys inside the vehicle. If RPM is selected Doors will lock when engine RPM exceed 2.5 times the idle.(tach wire must be connected) Ignition Door Unlocking For
