Manual de instrucciones de Fusion ElectronicsCE-99200

Resumen del contenido incluido en la página 1

INSTALLATION MANUAL
VEHICLE SECURITY SYSTEM
CE-SS200

Resumen del contenido incluido en la página 2

TABLE OF CONTENTS FUSION CULTURE • PROGRAMMING REMOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 4 There’s no point doing something if no one notices. We’ve always • ALARM FEATURES PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . pg 5 believed the way to make things happen is by getting noticed. From our product, to our demo cars, to our events, FUSION is about • ADJUSTING THE SENSITIVITY LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . pg 8

Resumen del contenido incluido en la página 3

PROGRAMMING REMOTES ALARM FEATURES PROGRAMMING: ALARM FEATURE “I” PROGRAMMING: 1. Turn the ignition switch ‘OFF/ON’ 3 times (within 15 seconds) and leave in the ON position. 1. Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds) and leave in the OFF position on the 3rd time. 2. Push the valet switch 3 times, and hold on the 3rd push until a long chirp is heard from the siren, and then release the valet switch. You 2. Push the valet switch twice, and hold on the 2nd push

Resumen del contenido incluido en la página 4

ALARM FEATURE “II” PROGRAMMING: ALARM FEATURE “III” PROGRAMMING: 1. Turn the Ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds), 1. Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds), and leave in the OFF position. and leave in the OFF position. 2. Push the valet switch 4 times and hold on the 4th push until two short 2. Push the valet switch 6 times and hold on the 6th push until three chirps and one long chirp is heard, and then release the valet switch. short chir

Resumen del contenido incluido en la página 5

ADJUSTING THE SENSITIVITY LEVEL OF THE SHOCK SENSOR WIRING DIAGRAM 1. Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds) and leave in the OFF position. 2. Push the valet switch 6 times and hold on the 6th push until three short chirps and one long chirp is heard, and then release the valet 6Pin switch. You are now in the alarm feature ‘Shock Sensor’ White 6PinMiniConnector Black Antenna Wire programming mode. 3. Press and hold button for 2 seconds. One long siren chirp wi

Resumen del contenido incluido en la página 6

B: 6 PIN MINI CONNECTOR WIRE HARNESS: A: CENTRAL LOCKING DIAGRAMS (After market Door Motors) INSTALLING DOOR LOCK MOTORS (2 WIRE) Green/white 12V 1. Violet Wire: Positive Door Pin Switch Input Blue/white Blue/red 2. Blue Wire: Instant Trigger Ground Input Green/red 3. Green Wire: Negative Door Pin Switch Input 12V Blue/yellow +12V Green/yellow 4. Yellow Wire: To Ignition Switched + 12V Cut From ignition switch To start solenoid 5. Orange Wire: 200mA Grounded when armed Red wire 30 White wire

Resumen del contenido incluido en la página 7

POSITIVE TRIGGER DOOR LOCK SYSTEM 2 STEP DOOR UNLOCK WIRE CONNECTIONS FOR 5 WIRE ALTERNATING DOOR LOCKS +12V Green / white Master + 12V OEM Door Master Lock Locking 87 86 Blue / white Switch Red / White 87A 85 +12V 30 Unlock Door Lock Door unlock Lock Green /yellow + 12V x Cut the Unlock Wire Blue / yellow Green / Red x Cut the Existing Green / White Lock Wire 6-Pin Green / Yellow Door +12V Lock Blue / Yellow Wire Blue / Red Harness OEM Slave ALTERNATING DOOR LOCKS Blue / White Door Lock Switch

Resumen del contenido incluido en la página 8

2 STEP DOOR UNLOCK WIRE CONNECTIONS FOR POSITIVE SWITCHED SPECIFICATIONS: DOOR LOCKS Power supply: 10 VDC – 16 VDC +12V OEM Door Master Lock Operating temperature: -40 °C – +80 °C (-40 °F – +176 °F ) 87 TX Frequency: 433.92 M Hz Red / White Unlock Lock 86 87A 85 Existing Pos. 30 Unlock Wire +12V Existing Pos. POWER CONSUMPTION: Lock Wire Blue / Red Indicator light flash output: 15 Amp 6-Pin Door Blue / White Door Lock: 10 Amp Lock Green / White Door Unlock: 10 Amp Wire Harness Gre

Resumen del contenido incluido en la página 9

• • Specifications and design are subject to change without notice • •