Resumen del contenido incluido en la página 1
®
The company behind Python Auto Security Systems
is Directed Electronics.
Vista, CA 92081
www.pythoncarsecurity.com
Since its inception, Directed Electronics has had one
purpose, to provide consumers with the finest vehicle
security and car stereo products and accessories
available. The recipient of nearly 100 patents and
Innovations Awards in the field of advanced electronic
technology, Directed Electronics is ISO 9001 registered.
®
SECURITY FOR THE BEST
Quality Directed Electronics pro
Resumen del contenido incluido en la página 2
Congratulations Congratulations on the purchase of your state-of-the-art remote start and security system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many fea- tures. For more information please visit the below website: http://www.pythoncarsecurity.com – For general and additional guide information. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. What you get Wel
Resumen del contenido incluido en la página 3
Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your Responder HD system comes with a warranty. Please make sure you receive the warranty registration card and proo
Resumen del contenido incluido en la página 4
Contents Getting Started .................................................................................................... 4 Charging the remote control: ................................................................. 4 Keys to using this manual ...................................................................... 5 Remote Control Information .................................................................................. 6 Control Center .................................................
Resumen del contenido incluido en la página 5
Button Beeps ..................................................................................... 25 Paging ............................................................................................ 25 Temp Units ....................................................................................... 25 Adjustments Menu ............................................................................................. 26 Clock Settings .............................................................
Resumen del contenido incluido en la página 6
Out of Range .................................................................................... 47 No Remote Output ............................................................................. 47 Feature not Available ......................................................................... 47 No Function Assigned ........................................................................ 48 1-way Companion Remote Control ..................................................................... 49 A
Resumen del contenido incluido en la página 7
Getting Started Your Responder HD remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase, the battery charge may have depleted. To ensure proper operation, check the battery level and connect the battery charger if not fully charged. See Battery Information and Status Screen Icons sections for more informa- tion about the battery. Charging the remote control: 1. Plug the AC adap
Resumen del contenido incluido en la página 8
At a Glance Keys to using this manual Specific actions (in bold type) and style conventions are used consis- tently throughout this manual, they are as follows: Toggle: implies rolling the menu wheel up or down and releas- ing. Press: implies pushing directly inward on the menu wheel or com- mand button and releasing. Hold: is used after Toggle or Press actions when the menu wheel or command button needs to be held in position for an extended period of time, typically several seconds. ARME
Resumen del contenido incluido en la página 9
Remote Control Information Internal Antenna Menu 1-800-274-0200 Display Remote RPN 7941P IC: 1513A-7941 Wheel Details FCC ID:EZSDEI7941 Reset Command Button Buttons Feature Description Internal Antenna* Used for transmitting and receiving information Display Full color display Command buttons (4): Used to perform arming, disarming, auxiliary channel and remote start commands Menu wheel Used to access Function Level screens, control Status Screen info center content, and navigates the remote
Resumen del contenido incluido en la página 10
At a Glance Control Center Control button Status LED The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: The In-vehicle system antenna, for 2 way communication. The Status LED, as a visual indicator of the system’s status. The Control button, for placing the system into Valet Mode* and to perform the Emergency Override** operation. * See Remote and System Operations section fo
Resumen del contenido incluido en la página 11
Status Screen Icons Clock Battery Level Page/Alerts Timer Mode/Smart Start Siren Status Remote Start Status Sensor Status Info Center System Status Name Tag The table below describes all the Status screen icons. Feature Description Clock Indicates the time in 12 or 24 hour format Battery level Full ¾ ½ ¼ Empty Timer Mode / Smart Start Timer Mode is enabled. Smart Start is enabled. Remote Start Remote start is active, the engine is running. Manual Transmission Start m
Resumen del contenido incluido en la página 12
At a Glance Feature Description Name Tag Displays a personalized name tag 1-15 characters long Info Center Displays the Remote Start runtime, Temperature Auto-report, Parking meter and Countdown timers. While Status screen is on, press the menu wheel to change the displayed information. Sensor Status Trigger Zones are enabled and functioning normally. Trigger zone fault found when arming and is bypassed. NPC On, a sensor has triggered excessively and is bypassed Remote Sensor bypass On, t
Resumen del contenido incluido en la página 13
Using your System Commands and Confirmations Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start fea- tures while Advanced commands control more specialized features and request reports. Confirmations for Basic or Advanced commands are indicated first by siren chirps and vehicle light flashes, and then as animations, still screens and beeps or tones on th
Resumen del contenido incluido en la página 14
Commands 2. Pressthe button while this screen is still on to perform the Silent Arm command. SILENT ARM 3. The Responder HD remote will play the animation followed by the Status screen. Status Screen Blank Display Toggle Menu Wheel Up or Down Command Buttons Fault Condition Alerts If, when performing a command, a condition exists that does not al- low the activation of a feature, a fault screen and tone plays as an alert. For more details on the condition and possible resolutions, use t
Resumen del contenido incluido en la página 15
Basic commands (function level 1) Arm Press and release The alarm arms, doors lock (if connected), and the siren chirps and lights flash once. The ARMED animation and beeps play to confirm. If Valet mode* is On the doors lock and the LOCKED (IN VALET) anima- tion and tone play. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the Trigger Zone Fault report** plays. To Arm and Panic Press and hold The alarm Arms (or Locks in Valet)
Resumen del contenido incluido en la página 16
Commands Disarm Press and release The alarm disarms, doors unlock (if connected), and the siren chirps DISARM and lights flash twice. The animation and beeps play to con- UNLOCK (IN VALET) firm. If Valet mode* is On the doors unlock and the animation and tone play. More than 2 siren chirps and remote beeps indicates a trigger has occurred. The Disarm animation is then replaced by the Alarm Trigger report.** Remote Start Press and release Activates (or if On, deactivates) the remote star
Resumen del contenido incluido en la página 17
Advanced commands: Function Level 2 From blank screen, toggle menu wheel down 2 times Silent Arm Press and release The alarm arms, doors lock (if connected), and the lights flash once. The SILENT ARM animation plays to confirm. Valet mode* or Trigger Zone Fault report** messages may be received. AUX 1 AUX Press and release AUX CHANNEL Activates (or if On, deactivates) the Aux 1 output. The animation and On tones or Off tones play to confirm. * See Remote and System Operations section fo
Resumen del contenido incluido en la página 18
Commands Silent Disarm Press and release The alarm disarms, doors unlock (if connected), and the lights flash twice. The SILENT DISARM animation plays to confirm. The Alarm Trig- ger report* may replace the Silent Disarm animation. Runtime Reset Press and release If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The RUNTIME RESET animation and tones play to confirm. The Remote Start runtime is reset in the S
Resumen del contenido incluido en la página 19
Advanced commands: Function Level 3 From blank screen, toggle menu wheel down 3 times Sensor Bypass Press and release to access menu The Sensor Bypass menu screen has four options, pressing the appro- priate button as shown below activates that bypass level. An appropri- ate screen and beeps play to confirm. Warn away Press and release : all sensor warn-away output and messages to the remote are defeated. AUX Optional sensors Press and release : optional sensor warn-away and full trigger
Resumen del contenido incluido en la página 20
Commands Remote Valet Press and release VALET MODE ENTER Enters (or if On, exits) Valet Mode. The or EXIT VALET MODE animation and beeps play to confirm. See Valet Mode for more details Advanced Start* Press and release Displays the Advanced Start menu screen with two options: Timer Mode Press and release : Activates (or if On, deactivates) Timer Mode. The lights flash quickly four times for On and slowly four times for Off. The TIMER MODE ACTIVATED or TIMER MODE DEACTIVATED animat
