Resumen del contenido incluido en la página 1
OP/CL PITCH BEND PITCH BEND
OP/CL
TIME SGL PROG. LOOP PITCH TIME SGL PROG. LOOP PITCH
0 0
SKIP SKIP
DCD-PRO200
SEARCH MKIII SEARCH
CUE CUE
+ +
PITCH PITCH
DCD-PRO200
MKIII
POWER
FLIPFLOP
© American AUDIO Los Angeles, CA 90058 USA
Resumen del contenido incluido en la página 2
CONTENTS SPECIFICATIONS.................................................................................................................................2 IMPORTANT SAFETY ITEMS...............................................................................................................3 SAFETY INSTRUCTIONS.....................................................................................................................4 GENERAL NOTES ON USE.....................................................
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY ITEMS FOR U.S.A. & NOTE: CANADA MODEL ONLY This CD player uses a semiconductor laser. It is recommended for use in a room at the following WARNING: temperature: 41˚F - 95˚F / 5˚C - 35˚C TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO LABELS (for U.S.A. model only) WATER OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully. Do not damage or deform; it may cause electric shock or malfunction when used. Hold plug attach ment when removing from wal
Resumen del contenido incluido en la página 4
SAFETY INSTRUCTIONS I. Read Instructions - All the safety and operating 10. Power-Cord Protection - Power-supply cords instructions should be read before the appliance should be routed so that they are not likely is operated. to be walked on or pinched by items placed upon or against them, paying particular 2. Save Instructions - The safety and operating attention to cords at plugs, convenience instructions should be saved for future receptacles, and the point where they exit referenc
Resumen del contenido incluido en la página 5
GENERAL NOTES ON USE • Avoid high temperatures. • Allow for sufficient heat dispersion when installed on a rack. • Handle the power cord carefully. • Hold the plug when unplugging the cord. • Keep the set free from moisture, water, and dust. • Unplug the power cord when not using the set for long periods of time. • Do not obstruct the ventilation holes. (For sets with ventilation holes.) • Do not let foreign objects in the set. • Do not let insecticides, benzene, and thinner come in contact with
Resumen del contenido incluido en la página 6
FUNCTIONS & CONTROLS CONT. REMOTE UNIT FRONT PANEL FIGURE 3 1 2 3 4 5 6 7 8 9 10 O P/ C L PITCH BEND PITCH BEND O P/ C L TIME SGL PROG. LOOP PITCH TIME SGL PROG. LOOP PITCH 0 0 SKIP SKIP DCD-PRO200 SEARCH SEARCH MKIII CUE CUE + + PITCH PITCH 11 13 14 15 16 17 12 18 1. TRAY OPEN/CLOSE (OPEN/CLOSE BUTTON) 10. PITCH (PITCH BUTTON) 11. PLAY/PAUSE (PLAY/PAUSE BUTTON) 2. LCD (LIQUID CRYSTAL DISPLAY) 3. (-) PITCH BEND 12. CUE (CUE BUTTON) 4. (+) PITCH BEND 13. PITCHLEDINDICATOR 5. PITCH SLIDER 14.
Resumen del contenido incluido en la página 7
FUNCTIONS & CONTROLS CONT. A. DRIVE TRANSPORT (Figures 1 & 2) Remember, that this is a momentary function 1) POWER (Power On/Off Button) - When the when you remove your finger from the pitch bend POWER Button is pressed, the power turns button the BPM's will automatically return to on, press again to turn power off. SLIDERS (5) selected pitch. 2) PLAYER 1 TRANSPORT TRAY- Place the 4) (+) PITCH BEND Button - The (+) pitch bend a compact discs in this tray. function allows a momentary “B
Resumen del contenido incluido en la página 8
FUNCTIONS & CONTROLS CONT. 17) FORWARD SKIP BUTTON - Use this button to 4) ELAPSED INDICATOR - It indicates that the time shown on the display is the elapsed time. skip to the next track on the CD. 5) TOTAL INDICATOR - It indicates that the time 18) FLIP FLOP Use a std. mini plug (stereo) to plug in - shown on the display is the elapsed time. Side 1 to Side 2. Set both sides of the CD player to 6) BAR INDICATOR - These ten indicators provide single mode on the control. When Disc 1
Resumen del contenido incluido en la página 9
PREPARATIONS 3. Connections 1) Turn off the POWER switch. 2) Connect the RCA pin cables to the inputs on your mixer. 3) Connect the control cables to the REMOTE connector on the main unit. CAUTION: Be sure to use the supplied control cables. Using another type of cable may result in damage. Be sure the power is off when connecting the control cables. Otherwise the units may not work properly. BASIC OPERATIONS 1. Opening and Closing the Disc Holder • Turn the unit power on. Press the OPEN/CLOSE
Resumen del contenido incluido en la página 10
BASIC OPERATION (CONT.) 4. Starting Playback • Press the PLAY/PAUSE button during the pause or cue to start playback. • The PLAY indicator lights when playback starts. • The point at which playback starts is automatically stored in the memory as the cue point. The pickup then returns to the cue point (the point at which playback started) when the CUE button is pressed. (Back Cue) (Figure 10) PLAY Fig. 11 Fig. 10 / II CUE PAUSE 5. Stopping Playback • There are two ways to stop playback. 1) Pres
Resumen del contenido incluido en la página 11
BASIC OPERATION (CONT.) 7. Cue • ”Cueing” is your preferred starting point of playback. • Press CUE button, the player will enter cue mode. The playback returns to the cue point and enter pause condition, the cue and pause indicator light up. When PLAY/PAUSE button is pressed, play starts from the cue point. • When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the position at which the sound starts and cues there (Auto Cue). • If the CUE
Resumen del contenido incluido en la página 12
BASIC OPERATION (CONT.) 9. Scanning (Fast forward/Fast backward) • Scanning is a function for moving quickly forward or backward while the SCAN/SEARCH buttons are pressed to let you find a desired play point quickly. • This unit supports 3 different speeds, the scanning speed depends on how long you hold the button. If you hold the SCAN/SEARCH button for about 3 seconds, the scanning speed will change. When you release the button the scanning speed returns to normal speed. • Press and hold the
Resumen del contenido incluido en la página 13
BASIC OPERATION (CONT.) 13. Loop Play • Press the LOOP button to set the loop start point A, the LOOP indicator will flash on the LCD. • Press the LOOP button again to set the loop end point B. After the B point is set the playback will enter the loop play from A to B repeatedly. • Press the LOOP button again, the loop play function is canceled, the LOOP indicator goes out. BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power be sure that the
Resumen del contenido incluido en la página 14
©American AUDIO Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 800-333-0644 Fax: 323-582-2610 Web: www.americanaudio.us E-mail: info@americandj.com
