Manual de instrucciones de GE GPS5WW

Resumen del contenido incluido en la página 1

(iiiiii iii!!{{{{{{i COn s u _iiv_i e _ir{iii:i;;,i iii _ii ¸'_i (i:;ii u :!!{{; _il _i! ii(i1ii
Appliances
Installation
Instructions
GPS5CC,GPS
sher Side Panel Kit
The Side Panel Kit is used to enclose a built-in dishwasher
Installation of this panel kit requires basic mechanical and
when a fully supported countertop and cabinet cavity do not carpentry skills. Wear your safety equipment when using tools
have an end panel present. The Side Panel Kit is not designed and handling parts for your pr

Resumen del contenido incluido en la página 2

installation instructions The installation of the side panel requires the panel support STEP 2 LAY OUT MOUNTING HOLES FOR bracket to be mounted to the underside of the countertop TOEKICK PANEL and the toekick panel to be mounted to the floor. If the panel The rear-mounting hole must be3ol/4" from the back of is installed perpendicular to a wall, the side panel will also be fastened to the wall. the opening and 23-1/2" from the opposite side. The front mounting hole must be 19" from the back of t

Resumen del contenido incluido en la página 3

Installation Instructions STEP 4 FASTEN PANEL SUPPORT BRACKET STEP 6 POSITION PANEL AGAINST BACK OF TO UNDERSIDE OF COUNTERTOP CABINET AND TOEKICK PANEL TO FLOOR Skip this step and go to Step 10 if the back of the dishwasher enclosure is not a wall or if gou choose not to fasten the side Fasten the panel support bracket to the underside of the panel to the back of the dishwasher enclosure. countertop using two #8 x 3/4" wood screws and two 3/16" flat washers. Gentlg push side panel against the r

Resumen del contenido incluido en la página 4

installation instructions STEP iO TIGHTEN THE FASTENERS STEP 9 ATTACH SIDE PANEL TO SUPPORT BRACKET AND TOGGLE BOLTS Tighten the fasteners in this order: 1. Toggle bolts or wood screws on back of panel (if present) Place the side panel against the panel support bracket and 2. Machine screws on top of panel insert two 1/4" machine screws through the side panel and 3. Machine screws on bottom of panel. support bracket while aligning the side panel with the toggle bolts. Install the lock washers an