Manual de instrucciones de Spalding M800031

Resumen del contenido incluido en la página 1

REQUIRED TOOLS
AND MATERIALS:
Backboard and Rim
•2 People
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
•Tape Measure
•Step Ladder - 8ft.
(2.4 m)
•(2 each) Wrenches
and/or Socket Wrenches
and Sockets (Deep-Well
Sockets are
Recommended).
1/2" 3/4"
CAUTION:
THIS BACKBOARD AND GOAL ARE NOT DESIGNED TO
SUPPORT A PLAYER HANGING FROM THE GOAL OR NET.
FAILURE TO OBSERVE THIS CAUTION MAY CAUSE
BODILY INJURY AND / OR PROPERTY DAMAGE.
AND/OR
1/2"

Resumen del contenido incluido en la página 2

SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injur

Resumen del contenido incluido en la página 3

PARTS LIST - See Hardware Identifier Item Qty. Part No. Description 1 1 579800 Warning Label 2 4 203113 Bolt, Hex Flange, 5/16-18 x 2.5 Long 3 2 203038 Bolt, Carriage, 5/16-18 x 2.75 Long 4 6 203309 Washer, 1” O.D. 5 6* 203100 Nut, Hex Flange, 5/16-18 6 1 Rim 7 1 Net 8 1 Backboard 9 1 203470 Washer, Flat, 1.5” O.D. 10 1 900033 Bracket, Slam Jam 11 1 203796 Bolt, Tee, 3/8-16, 5” Long 12 1 200318 Bracket, Reinforcement, Slam Jam 13 1 203472 Spring, Rim 14 1 203795 Nut, Special, 3/8-16 15 1 203365

Resumen del contenido incluido en la página 4

ASSEMBLE THE BACKBOARD AND RIM UNIVERSAL MOUNTING BRACKET INSTALLATION 1A. NOTE: WARNING! We recommend mounting TWO PEOPLE REQUIRED FOR backboard to a solid material THIS PROCEDURE. FAILURE (steel) behind rim area. TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. 3 Model 8406 Universal Mounting Bracket 3 (NOT SUPPLIED) 11 10 2 5 10 15 5 4 5 5 4 ID# M800031 12/05

Resumen del contenido incluido en la página 5

EXTENSION ARM INSTALLATION 1B. 8 3 3 11 5 5 10 2 10 5 15 NOTE: We recommend mounting backboard to a solid material (steel) behind rim area. ELEVATOR INSTALLATION 1C. NOTE: Use existing elevator components. 5 5 5 8 15 3 11 10 3 3 2 10 12/05 ID# M800031 5

Resumen del contenido incluido en la página 6

Install Slam Jam Rim to Backboard 2. A Fit rim (6) securely into bracket (10) as shown. Allow T-bolt (11) to slip through center hole in rim (6). B Install reinforcement bracket (12) onto T-bolt (11) as shown. C Install spring (13) onto T-bolt (11) as shown. D Install special nut (14) and washer (9) onto T-bolt (11). E Tighten nut (14) until flush with end of T-bolt (11). A B 6 12 11 11 10 14 9 C D 13 11 11 9 E 14 6 ID# M800031 12/05

Resumen del contenido incluido en la página 7

Install net (7). 3. 1. 2. 7 4. 3. 7 4. Place warning label (1) in location clearly visible within playing area. WARNING Read and understand warnings listed below before using this product. Failure to follow these warnings may result in serious injury and/or property damage. Ownermustensurethatallplayersknowandfollowtheserules forsafeoperationofthesystem. MU EL 10 ft. • DONOTHANGontherimoranypartofthesystemincluding V backboard,supportbracesornet. 50Y 6 1 • Duringplay,especiallywhenperformingdunk