Manual de instrucciones de Keys Fitness ABDOMINAL BENCH KPS-AAB

Resumen del contenido incluido en la página 1

KPS-AAB
ADJUSTABLE ABDOMINAL BENCH
Questions?
Call our toll free Keys Fitness Helpline
1-800-683-1236
MANU AL
O WNER’S MANU AL
O WNER’S

Resumen del contenido incluido en la página 2

THANK YOU for making this Power System unit a part of your exercise program. Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unn

Resumen del contenido incluido en la página 3

BEFORE YOU START Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner 's

Resumen del contenido incluido en la página 4

ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Main Frame (2) to Front Base (3) by securing with Bolt (15), Washers (17) and Nylon Lock Nut (18). STEP 2 Slide Upright Frame (1) into Main Frame (2). Make sure that adjustment holes in Upright Frame (1) face toward Main Frame (2). Slide Bolt (15) into Upright Frame (1) and secure with Washers (17) and Nylon Lock Nut (18). This bolt will keep the Main Frame (2) connected to the Upright Frame (1)

Resumen del contenido incluido en la página 5

ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Slide Roller Pad Tubes (4) into holes in Main Frame (2). Slide Upholstered Roller Pads (6) onto Roller Pad Tubes (4). Secure with Roller Pad Tube Caps (13). We reccommend using a rubber hammer to place Roller Pad Tube Caps (13) onto Roller Pad Tubes (4). STEP 4 Connect Seat Pad (5) to Main Frame (2) with Bolts (16) and Washers (17).

Resumen del contenido incluido en la página 6

PARTS LIST # DESCRIPTION QTY 1 Upright Frame 1 2 Main Frame 1 3 Front Base 1 4 Roller Pad Tube 2 5 Seat Pad 1 6 Upholstered Roller Pad 4 7 Grip 1 8 End Cap w/ Wheel - 60 2 9 End Cap - 60 2 10 Plastic Sleeve - 63.5x88.9 - 50.8x76.2 2 11 Plug - 50.8x76.2 1 12 Plastic Sleeve - 50.8x76.2 - 25 1 13 Roller Pad Tube Cap - 25 4 14 Pop Pin 1 15 Bolt M10x90 2 16 Bolt M10x70 2 17 Washer - 10 6 18 Nylon Lock Nut M10 2 EXPLODED VIEW

Resumen del contenido incluido en la página 7

KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the origi- nal purchaser is lifetime of the original purchaser. Keys warrants that the Product you have purchased for non-commercial, personal, family, or househould use from Keys or from an authorized Keys reseller is free from defects in materials o

Resumen del contenido incluido en la página 8

Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236