Manual de instrucciones de Dakota Digital LAT-NR261

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS
LAT-NR261
LED Tail Lights for 1969 Impala/Caprice

MAN#650217

Kit Includes:

Installation:

1. Remove the two screws and lens on each tail light.
2. Remove the light bulb from socket.
3. Carefully remove the gasket from the housing. If the gasket is hard or brittle it should be
replaced.





4. Now is a good time to clean or replace the lenses and housings if necessary. If the lenses are
in poor condition a replacement set is recommended.
M

Resumen del contenido incluido en la página 2

5. Insert the LED assembly bulb base into the tail light housing socket. 6. Place the new LED assembly into the housing so that the aluminum mounting bracket sits into the groove for the lens gasket. 7. Replace the lens gasket. The gasket will sit on top of the aluminum mounting bracket tabs. 8. Replace the lens and carefully tighten the screws. 9. Repeat for the other tail light. 10. Test the tail lights, brake lights, and turn signals. If the turn signals do not flash you will