Resumen del contenido incluido en la página 1
User Manual
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS 1. Before You Begin .............................................................................. 3 What Is Included ............................................................................................... 3 Unpacking Instructions ...................................................................................... 3 Claims ........................................................................................................................ 3 Text Conv
Resumen del contenido incluido en la página 3
1. BEFORE YOU BEGIN • Intimidator™ Spot LED 150 • Power Cord What Is • 2 x Mounting Brackets • Warranty Card Included • 2 x Mounting Bolts • Quick Reference Guide • Safety Eyebolt Unpacking Immediately upon receipt, carefully unpack the product and check the container to make sure you have received all the parts indicated above in good condition. Instructions If the container or the material inside the container (the product and included Claims accessories) appear d
Resumen del contenido incluido en la página 4
Use on Dimmer Auto Programs Product at a Outdoor Use Auto-ranging Power Supply Glance Sound Activated Replaceable Fuse DMX User Serviceable Master/Slave Duty Cycle Please read the following Safety Notes carefully before working with the product. The Safety Notes Notes include important safety information about installation, usage, and maintenance. • This product is not intended for permanent installation. • Always connect the product to a groun
Resumen del contenido incluido en la página 5
2. INTRODUCTION Product Overview Adjustable Lens Moving Head Moving Yoke Cooling Fan LED Display Fuse Holder DMX In/Out Power In/Out Intimidator™ Spot LED 150 User Manual (Rev. 5) Page 5 of 18
Resumen del contenido incluido en la página 6
Product Dimensions Page 6 of 18 Intimidator™ Spot LED 150 User Manual (Rev. 5)
Resumen del contenido incluido en la página 7
3. SETUP The Intimidator™ Spot LED 150 has an auto-ranging power supply and it can work with AC Power an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions. Always connect t
Resumen del contenido incluido en la página 8
Before mounting the product, read and follow the Safety Notes. Mounting The Intimidator™ Spot LED 150 may be mounted in any position; however, make sure Orientation adequate ventilation is provided around the product. • Before deciding on a location, always make sure there is easy access to the product Rigging for maintenance and programming purposes. • Make sure that the structure or surface onto which you are mounting the product can support the product’s weight. See t
Resumen del contenido incluido en la página 9
4. OPERATION To access the control panel functions, use the four buttons located underneath the Control Panel display. Operation Button Function Press to find an operation mode or to back out of the current menu option Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to activate a menu option or a selected value Mode Programming Steps Descript
Resumen del contenido incluido en la página 10
Set the product in DMX mode to control with a DMX controller. Configuration 1. Connect the product to a suitable power outlet. (DMX) 2. Turn the product on. 3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. When selecting a starting DMX address, always consider the number of DMX channels Starting Address the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some
Resumen del contenido incluido en la página 11
DMX Channel Assignments and Values Channel Function Value Setting 11-CH 1 Pan 000 255 0-540° 2 Tilt 000 255 0-270° 3 Fine Pan 000 255 Fine control of panning 4 Fine Tilt 000 255 Fine control of tilting 5 Speed 000 255 Pan/Tilt speed (fast to slow) 000 005 White 006 011 Yellow 012 017 Magenta 018 023 Green 024 029 Red 030 035 Cyan 036 041 Orange 042 047 Blue 048 053 Light Green 054 063 Amber 064 069 White + Yellow 6 Color Wheel 070
Resumen del contenido incluido en la página 12
064 071 Gobo 9 shake, from slow to fast 9 Gobo Wheel 072 079 Gobo 8 shake, from slow to fast 080 085 Gobo 7 shake, from slow to fast 086 091 Gobo 6 shake, from slow to fast 092 097 Gobo 5 shake, from slow to fast 098 103 Gobo 4 shake, from slow to fast 104 109 Gobo 3 shake, from slow to fast 110 115 Gobo 2 shake, from slow to fast 116 121 Gobo 1 shake, from slow to fast 122 127 Open 128 191 Cycle effect with increasing speed
Resumen del contenido incluido en la página 13
Channel Function Value Setting 6-CH 1 Pan 000 255 0-540° 2 Tilt 000 255 0-270° 000 005 White 006 011 Yellow 012 017 Magenta 018 023 Green 024 029 Red 030 035 Cyan 036 041 Orange 042 047 Blue 048 053 Light Green 054 063 Amber 064 069 White + Yellow 3 Color 070 075 Yellow + Magenta 076 081 Magenta + Green 082 087 Green + Red 088 093 Red + Cyan 094 099 Cyan + Orange 100 105 Orange + Blue 106 111 Blue + Light Green 112 117 Ligh
Resumen del contenido incluido en la página 14
Set the product in one of the standalone modes to control without a DMX controller. Configuration 1. Connect the product to a suitable power outlet. (Standalone) 2. Turn the product on. Never connect a product that is operating in any standalone mode (either Static, Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. To enable the Sound Act
Resumen del contenido incluido en la página 15
You are able to flip the LED display for easy readability in any mounting situation. Display To select your display angle: Orientation 1. Press repeatedly until diS shows on the display. 2. Press or to select normal display mode (diS) or inverse display mode (r diS). 3. Press . The Master/Slave mode allows a single Intimidator™ Spot LED 150 unit (the “master”) to Master/Slave control the actions of one or more Intimidator™ Spot LED 150 units (
Resumen del contenido incluido en la página 16
5. TECHNICAL INFORMATION Dust build up reduces light output performance and can cause overheating. This can Product lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum Maintenance performance and minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions
Resumen del contenido incluido en la página 17
6. TECHNICAL SPECIFICATIONS Length Width Height Weight Dimensions and Weight 8.1 in (205 mm) 8.3 in (211 mm) 11.5 in (291 mm) 9.3 lbs (4.2 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Supply Type Range Voltage Selection Power Switching (internal) 100~240 V, 50/60 Hz Auto-ranging Parameter 120 V, 60 Hz 230 V, 50 Hz Consumption 88 W 92 W Operating 0.7 A 0.4 A Power linking current (units) 8 A (6 units) 8 A (12 units) Fuse F 2 A,
Resumen del contenido incluido en la página 18
In case you need to return a product or request support, follow the procedure below: • If you live in the U.S., contact CHAUVET® World Headquarters (see below). • If you live in the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). • If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your distributor of record. See www.chauvetlighting.com for distributors outside the U.S., United Kingdom, or Ireland. If you live outside the U.S., United Kingdo
