Resumen del contenido incluido en la página 1
High Resolution Series
Surround Loudspeaker
HRS-SAT4BIP
User's Manual
Resumen del contenido incluido en la página 2
Safety Important Safety Instructions 1. Read Instructions. 8. Refer all servicing to qualified service personnel. Servicing is required when the 2. Keep these Instructions. apparatus has been damaged in any way, 3. Heed all Warnings. such as a connector is damaged, liquid 4. Follow all Instructions. has been spilled or objects have fallen into 5. Do not use this apparatus near water. the apparatus, the apparatus has been exposed to rain or moisture, does not 6. Clean only with a dry clot
Resumen del contenido incluido en la página 3
Misc. Introduction Features Location Installation Features Introduction • Perfectly matched to the HRS Thank you for purchasing these Sunfire High Resolution Series surround subwoofers, and the HRS-SAT4 and loudspeakers. We hope you enjoy them HRS-SAT4C loudspeakers to form a and the music they make as much as we complete system have enjoyed creating them for you. • HRS-SAT4BIP can be wall-mounted, or placed on a cabinet or shelf. They can These loudspeakers follow a great be used for sur
Resumen del contenido incluido en la página 4
Overview Tweeter The HRS-SAT4BIP surround loud- The tweeters used in the surround speakers are specifically designed to pro- loudspeakers represent a unique ap- vide high output and high performance proach to tweeter design that results in for your home theater. Years of research unrivaled performance. It shares design and decades of experience have gone elements with tweeters found in very into these amazing loudspeakers. expensive European loudspeakers, with a frequency response that is f
Resumen del contenido incluido en la página 5
Features High Resolution Series HRS-SAT4BIP 4 1 3 1. Mounting Brackets 3. Grilles Each surround loudspeaker has two The tweeter and woofer grilles are held keyhole brackets that allow for wall in place with small magnets, and can mounting horizontally or vertically. be easily removed if required. Gently pry them off by hand by lifting the cor- ners one at a time. . Binding Posts The gold-plated spring-loaded termi- nals accept bare wire, tinned-wire, or pins. Always use high quality conn
Resumen del contenido incluido en la página 6
Loudspeaker Locations To find the best location for your left, 7.1 Configuration right, and center loudspeakers and the Sunfire home theater processors and subwoofer, we recommend that you receivers have two extra outputs for sur- consult their owner's manuals. The HRS- round back loudspeakers. These create SAT4BIP bipole loudspeakers are used a wonderful sense of realism in surround as surround and surround-back loud- effects during playback of Dolby Digital speakers in the following co
Resumen del contenido incluido en la página 7
Using a subwoofer The loudspeakers are designed to Subwoofer Location be used with a subwoofer to fill in The best location for a single the lower frequency range. They subwoofer can be found by following are not designed to accept 00 watts of these steps: power at the full frequency range. 1. Place the subwoofer on your couch The Sunfire High Resolution Series or favorite easy-listening chair. subwoofers are a perfect match for these surround loudspeakers. There are a vari- . You
Resumen del contenido incluido en la página 8
Installation Read the details on page 6 to help Preliminary steps: determine the best position for your • Clear the area where you are going loudspeakers. to work, so it will be safe. The loudspeakers can be wall- Make sure there is no wiring, or mounted, or simply placed on shelves or gas or water pipes behind the wall cabinets where you are going to drill! To wall-mount the loudspeakers, please • Temporarily remove any wall- follow the instructions below. mounted flat screen display if
Resumen del contenido incluido en la página 9
6. For holes into dry wall, press a dry Wall-mounting the wall anchor into each hole, and HRS-SAT4BIP gently tap them in flush. Tighten the screws by hand, until the heads are The HRS-SAT4C comes with a wall- sticking out approximately 1/8". mount template to help mark the correct position for the two mounting screws. It is 7. To reduce the chance of the loud- recommended that you get at least one speaker vibrating against the wall, of the screws into a wall stud, if possible. place t
Resumen del contenido incluido en la página 10
Specifications Design Dimensions way, High Pressure (Maximum dimensions, including grille) Height 6.75" (171.5 mm) Drive Units Width 10.0" (255 mm) HF: Dual 1-inch ring radiating tweeters Depth 4.35" (110.6 mm) Weight 7.0 lb. (3.2 kg) LF: 4.5-inch High Back-emf Frequency Response 95 Hz to 30 kHz Maximum Power 00 watts Minimum Power 5 watts Sensitivity (2.83 V/1 meter) 89 dB Maximum Output 110 dB Impedance 6 ohms nominal Connections 1 pair of gold plated spring terminals © 2009 Sunfire, a
Resumen del contenido incluido en la página 11
Troubleshooting The HRS-SAT4BIP loudspeakers are Service Assistance designed and built to provide years of If your Sunfire product ever requires service, trouble-free performance. Most prob- write to us or call: lems that occur can usually be solved by checking your setup, or by making sure Sunfire, all components are fully operational. 1300 E New Circle Road, Suite 150 Lexington, KY 40505 The following information will help you Phone 859-514-890 deal with common problems you may experie
Resumen del contenido incluido en la página 12
High Resolution Series Surround Loudspeaker HRS-SAT4BIP Manual 913-160-00 Rev A
