Resumen del contenido incluido en la página 1
OPERATOR’S MANUAL
18 vOLT SPOTLighT
P715
bATTERiES ANd ChARgERS SOLd
SEPARATELy
ACCEPTS ALL ONE+ bATTERy PACKS
Your spotlight has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNiNg: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAvE ThiS MANUAL F
Resumen del contenido incluido en la página 2
TAbLE OF CONTENTS Introduction ..................................................................................................................................................................... Warranty .......................................................................................................................................................................... General Safety Rules .........................................................................................
Resumen del contenido incluido en la página 3
gENERAL SAFETy RULES iMPORTANT SAFETy iNSTRUCTiONS if wrapped or in contact with fabrics, the spotlight lens can produce sufficient heat to melt some fabrics. To WARNiNg! avoid serious personal injury, never allow the spotlight REAd ANd UNdERSTANd ALL iNSTRUCTiONS. Fail- lens to come in contact with anything. ure to follow all instructions listed below, may result in Keep light dry, clean, and free from oil and grease. electric shock, fire and/or serious personal injury. Always use a cl
Resumen del contenido incluido en la página 4
SyMbOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SyMbOL NAME dESigNATiON/EXPLANATiON V Volts Voltage A Amperes Current min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction Double-insulated construction .../min Per Minute R
Resumen del contenido incluido en la página 5
FEATURES PROdUCT SPECiFiCATiONS Weight ..................................................................... 1.5 lbs. Bulb ..................................................................6 V Halogen LOCK-ON BUTTON SWITCH TRIGGER Fig. 1 KNOW yOUR SPOTLighT LOCK-ON bUTTON See Figure 1. The lock-on button is convenient for continuous use for The safe use of this product requires an understanding of the extended periods of time. information on the product and in this operator’s manual as well a
Resumen del contenido incluido en la página 6
ASSEMbLy WARNiNg: PULL TAB TO Do not attempt to modify this product or create acces- REMOVE sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNiNg: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts. REMOviNg ThE WARNiNg LAbEL See Figure 2. The spotlight has a clin
Resumen del contenido incluido en la página 7
OPERATiON TO iNSTALL bATTERy PACK See Figures 3 - 4. Place the switch trigger in the OFF position. P104 18V LITHIUM-ION Place the battery pack in the spotlight. BATTERY PACK Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the spotlight before beginning operation. TO REMOvE bATTER y PACK See Figures 3 - 4. DEPRESS BOTH Place the switch trigger in the OFF position. LATCHES TO RELEASE Locate latches on side of battery pack a
Resumen del contenido incluido en la página 8
MAiNTENANCE Install new bulb assembly. WARNiNg: Replace bulb retainer pin. When servicing, use only identical replacement parts. Hold white connection terminal and reconnect white Use of any other parts may create a hazard or cause lead. product damage. Return the white connection point to its nest. Align tabs on each side of lens seal with notches on spotlight housing and seat lens seal in place. WARNiNg: Reattach bezel carefully by rotating clockwise. To avoid serious person
Resumen del contenido incluido en la página 9
MAiNTENANCE CAUTiON: BULB Do not use a higher rated fuse other than the specified ASSEMBLY amperage. This could cause damage to the product. REPLACEMENT FUSE See Figure 8. If the spotlight blows its fuse, you will need to replace it. Look for replacement fuses where you purchased this product. Remove the battery pack from the spotlight to access fuse housing. RETAINER Remove the current fuse and discard. Use a pair of PIN Fig. 7 fuse pullers if necessary. Use 10 amp JAT blade type a
Resumen del contenido incluido en la página 10
OPERATOR’S MANUAL 18 vOLT SPOTLighT P715 WARNiNg: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you
