Resumen del contenido incluido en la página 1
OPERATOR’S MANUAL
18 VOLT CORDLESS FLASHLIGHT
MODEL NO. FL1800
Your new cordless flashlight has been engineered and manufactured to Ryobi’s high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.
Thank you for buying a Ryobi flashlight.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Page 1
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS ■ General Safety Rule ................................................................................................................................................ 2-3 ■ Specific Safety Rules And/Or Symbols .................................................................................................................... 3-4 ■ Symbols .............................................................................................................................................
Resumen del contenido incluido en la página 3
GENERAL SAFETY RULES Tool Use and Care ■ Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting ■ Use clamps or other practical way to secure and edges are less likely to bind and are easier to control. support the workpiece to a stable platform. Holding ■ Check for misalignment or binding of moving parts, the work by hand or against your body is unstable and breakage of parts, and any other condition that may may lead to loss of control. affe
Resumen del contenido incluido en la página 4
SPECIFIC SAFETY RULES AND/OR SYMBOLS Important Safety Instructions For Charger a. That pins on plug of extension cord are the same number, size and shape as those of ■ Save these instructions. This manual contains im- plug on charger. portant safety and operating instructions for charger. b. That extension cord is properly wired and in Following this rule will reduce the risk of electric shock, good electrical condition; and fire, or serious personal injury. c. That wire size i
Resumen del contenido incluido en la página 5
SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of current --- Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load 0 ...
Resumen del contenido incluido en la página 6
OPERATION TO INSTALL/REMOVE BATTERY PACK CHARGING FLASHLIGHT See Figure 1. If your flashlight did not come in a cordless kit with other ■ Begin with a fully charged battery pack. cordless products, a battery pack and charger were not included. If you need to purchase a battery pack, request ■ Orient battery pack so that raised rib on battery pack recommended battery pack part number 1322401, aligns with groove inside flashlight. Battery pack is 1323303,130256001, 130224007 or 130255004. If you n
Resumen del contenido incluido en la página 7
OPERATION SWITCH See Figure 2. To turn your flashlight on and off, depress switch trigger. 180° ROTATING HEAD See Figure 2. Your flashlight has the feature of rotating the head 180° back and forth. BULB REPLACEMENT SWITCH See Figure 3. TRIGGER When purchasing replacement bulb, request recommended part number 780175002. 180° ROTATING HEAD TO REPLACE BULB: ■ Allow bulb to cool. ■ Remove battery pack from flashlight. ■ Remove lens cover by turning cover in counterclockwise direction, then remove co
Resumen del contenido incluido en la página 8
MAINTENANCE DO NOT abuse power tools. Abusive practices can damage tool as well as workpiece. WARNING: When servicing, use only identical replacement parts. WARNING: Use of any other part can create a hazard or cause product damage. Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and can result in a hazardous condition leading to possible serious personal injury. WARNING: Do not at any time let brake f
Resumen del contenido incluido en la página 9
NOTES Page 9
Resumen del contenido incluido en la página 10
OPERATOR'S MANUAL 18 VOLT CORDLESS FLASHLIGHT MODEL NO. FL1800 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. T
