Manual de instrucciones de Harbor Freight Tools CHICAGO ELECTRIC 95799

Resumen del contenido incluido en la página 1

Mini-led spotlight with
Magnetic base
Model 95799
asseMbly and operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
t o pre Vent serious injury, read and understand
all warnings and instructions before use.
© ®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained h

Resumen del contenido incluido en la página 2

specifications Cord Length 6’-9” long-retractable Material ABS thermoplastic housing Overall Dimensions 2-13/16” L x 2-1/2” W Power Source 12 VDC Cigarette Lighter Attachment Net Weight .45 Lbs. Fuse F2A250V save this Manual You will need this manual for the safety warnings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover.

Resumen del contenido incluido en la página 3

6. disconnect the power cord plug from the power source before making any adjustments, changing accessories, or storing the spotlight. always unplug the spotlight from its electrical outlet before performing any inspection, main- tenance, or cleaning procedures. 7. store an idle spotlight out of reach of children and other untrained persons. This product is dangerous in the hands of untrained users. 8. check for breakage of parts, and any other condition that may affect the spot- light’s o

Resumen del contenido incluido en la página 4

replacing the fuse Car Adapter with Cord (14) Spring (16) Fuse (15) F2A250V Car Adapter Tip (17) Car Adapter Threaded End (18) Figure 1 1. Unscrew the Theaded End (18) from the Car Adapter with Cord (14) as shown in Figure 1. 2. Pull out the Fuse (15) from the Car Adapter and Cord (14). The Fuse compartment also includes one Spring (16) and one Car Adapter Tip. These may come out when removing the Fuse (15). 3. The Fuse (15) is a F2A250V amp fuse. Do not replace with a different size fus

Resumen del contenido incluido en la página 5

operation instructions Lamp Ring (1) Magnetic Base (12) Figure 2 1. Your Mini-LED Spotlight has a Magnetic Base (12) which can be mounted to any metal surface-see Figure 2. 2. The Spotlight cord extends out to 6’-9” from the Car Adapter. Gently pull on the Car Adapter with Cord (14) to extend the cord. To draw the cord back into the housing, turn the Lamp Ring (1) counterclockwise-see Figure 2. Magnetic Base (12) Switch Button (9) Figure 3 3. The Spotlight can be set to four different light

Resumen del contenido incluido en la página 6

inspection, Maintenance, and cleaning 1. warning! Make sure the Power Switch is in its “OFF” position and that the Spotlight is unplugged from its power source before performing any inspection, maintenance, or cleaning procedures. 2. before each use, inspect the general condition of the Spotlight. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. do not use damag

Resumen del contenido incluido en la página 7

parts list part description Q’ty part description Q’ty 1 Lamp Ring 1 11 Rear Cover 1 2 Glass 1 12 Magnetic Base 1 3 Reflector 1 13 Right Housing 1 4 Circuit Board 1 1 14 Car Adapter with Cord 1 5 Circuit Board 2 1 15 Fuse F2A250V 6 Upper Cord Reel 1 16 Spring 1 7 Switch 1 17 Car Adapter Tip 1 8 Lower Cord Reel 1 18 Threaded End 1 9 Switch Button 1 10 Left Housing 1 asseMbly and parts diagraM Parts 15, 16, 17 and 18 shown in Figure 1 on page 4. please read the following carefully for tech