Manual de instrucciones de Oregon Scientific PROFESSIONAL WEATHER CENTER WMR200A

Resumen del contenido incluido en la página 1

Professional Weather Center
INTRODUCTION
Model: WMR200 / WMR200A
Thank you for selecting the Oregon Scientific™ Professional Weather Center
(WMR200 / WMR200A).
USER MANUAL
The base station is compatible with other sensors. To purchase additional sensors,
please contact your local retailer.
CONTENTS
Introduction .............................................................................................................. 1
Sensors with this logo are compatible with this unit.
Packaging Conte

Resumen del contenido incluido en la página 2

ASSEMBLY PARTS BACK VIEW 4 1 5 1x Vertical 1 x Cone-Shaped 1 x Horizontal Attachment Bracket End Attachment Bracket 6 2 7 3 1 x Bottom Pole 1 x Mid Pole 1x Top Pole 1. USB socket 2. Backlight (continuous) On/Off 3. Battery compartment 4. AC / DC socket 5. Wall mount holes / Adjustable table stand 2 x Rectangular 2 x Round U- bolts 6. RESET: Reset unit to default settings Base Legs 7. EU/UK slide switch (WMR200 only) 3 x Eye pins LCD DISPLAY 1 8 2 9 3 4 x screws (Type A) USB 1 x Versatile B

Resumen del contenido incluido en la página 3

10. Indicates HI / LO outdoor humidity alarms are ON RAINFALL 11. Humidity trend indicators 12. User selectable temperature units 1 5 INDOOR TEMPERATURE AND HUMIDITY 6 1 6 2 7 2 7 3 8 3 8 4 9 4 10 5 1. 0 (current) to – 24 hours rainfall record / 2. Accumulated total rainfall (refer to SINCE date stamp in clock area for further 1. Indicates HI / LO temperature alarms are ON details) 2. MAX / MIN temperatures 3. Rain rate indicator 3. Heat index 4. Rain reading 4. Indoor temperature reading 5. S

Resumen del contenido incluido en la página 4

WIND SENSOR GETTING STARTED SET UP REMOTE WIND SENSOR The wind sensor takes wind speed and direction readings. 1 The sensor is battery and solar powered operated. It is capable of transmitting data to the base station wirelessly within an approximate operating range of 100 meters 2 (328 feet). 4 IMPORTANT Ensure that the wind sensor is pointing North to enable it to record accurate readings. NOTE The sensor should be positioned in an open area away from trees or other obstructions. To

Resumen del contenido incluido en la página 5

REMOTE UNIT ASSEMBLY 15 3 4 13 2 14 1 13. Slide the solar panel connector into place on the opposite side of the bracket. Slot 1. Insert the cone-shaped end into the pole. the solar panel in place. 2. Using 2 screws, fix it firmly into place. 14. Adjust the solar panel. Once facing desired direction, use screw to fix in place. 3. Insert the versatile plastic base into the pole. Align the holes of the pole with the 15. Loosen the wing bolt and adjust the angle. Tighten wing bolt to secure solar pa

Resumen del contenido incluido en la página 6

22. Using the string, tie a knot on the eye pins. Hammer each eye pin into the ground at a 90° angle. 1 1 IMPORTANT Using the fasteners, tighten the string. To tighten, pull fastener down. To loosen, thread the string up through the fastener eyelets. 11. Plug the other solar panel cables into the socket on the wind vane. NOTE There are slots to insert the solar ALTERNATIVE SET UP: REMOTE WIND SENSOR ON EXISTING POLE power cable for convenient storage. There are also fasteners to hel

Resumen del contenido incluido en la página 7

SENSOR DATA TRANSMISSION To search for a sensor: 1. Select desired area to activate. 1 2. Press and hold CH and MEM. 3. icons will flash for 5 minutes. 3 2 NOTE Unit will search only for already registered sensors or new sensors reset 4 within last 30 minutes. To register a new sensor, reset sensor prior to search. The sensor reception icon in the remote sensor area shows the status: ICON DESCRIPTION Water will pool to the center of the cross when the rain gauge is level. If water remai

Resumen del contenido incluido en la página 8

To select clock display mode: 2. Press UNIT to select °C / °F. To auto-scan between sensors (Outdoor): Press clock area repeatedly to toggle between: 1. Press Outdoor Temperature / Humidity area. • Clock with seconds 2. Press and hold CH to display data for each sensor. • Clock with weekday • Date with year • Data logger (please refer to Memory / Data logger section) AUTO SCANNING FUNCTION To activate the outdoor temperature and humidity auto-scan function: 1. Press and hold CH to activate a

Resumen del contenido incluido en la página 9

HOURLY RECORDS Waxing Gibbous Waning Crescent Display Hourly readings of up to Barometer 24 hours back Hourly Rainfall 24 hours back BAR CHART UV 10 hours back To select chart display mode: To view hourly records: Press bar chart area to toggle between these chart displays: 1. Press desired area to activate. • Barometer 2. Press UP / DWN to view current (0) / hourly reading. • Rain • UV When MAX / MIN reading is displayed, the corresponding timestamp will be displayed in the clock area . ALARM

Resumen del contenido incluido en la página 10

If you have Windows Vista and User Account Control is ON (ticked): 1. In the PC software homepage, click on MENU located at the top right hand corner of software main webpage. i. In Select Installation Folder dialogue box, next to Folder text box (C:\ 2. Select HELP from drop-down list. This will redirect you to a new webpage. Click Program Files\Oregon Scientific\Weather OS), click Browse. on PC Software Manual. ii. To select a new location to save the program, select C:\Users\admin. {Or

Resumen del contenido incluido en la página 11

Memory Current, Min and Max EU-DECLARATION OF CONFORMITY Alarm Hi / Lo Hereby, Oregon Scientific, declares that this Professional Weather Center (Models: WMR200 / WMR200A) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration RADIO-CONTROLLED / ATOMIC CLOCK of Conformity is available on request via our Oregon Scientific Customer Service. Synchronization Auto or disabled Clock display HH:MM:SS Hour format