Manual de instrucciones de Oregon Scientific CABLE FREE WMR968

Resumen del contenido incluido en la página 1

TM
SECTION 2 INSTALLATION
CABLE FREE WEATHER
STATION The WMR968 operates at 433MHz. No wire installation is required
among units.
MODEL: WMR968
The WMR968 has an effective range of 109 yards in an open area.
Position the units within the range and be sure the transmission
USER’S MANUAL
path is clear of interference and obstacles.
Note:The anemometer, thermo-hygrometer and rain gauge should
SECTION 1 INTRODUCTION
be installed outdoors and in locations that best measure the weather
TM
Congratulati

Resumen del contenido incluido en la página 2

3. Align the red markings on the wind vane’s shaft. 3. Mount the rain gauge and its solar transmitter safely in place. 4. Put drops of water on the cross at the base on the rain collector to check the leveling. Water stay at position 1 - 4 means the gauge is not leveled 4. With the aid of a compass, face the red marking south before 5. Use metal ring to adjust the leveling of the rain collector if mounting the anemometer. necessary. METAL RING 6. Close the cover of the rain collector. 5. Mount

Resumen del contenido incluido en la página 3

SECTION 3 OPERATION THE MAIN UNIT The main unit gives you all the readings and controls. It should be THE MAIN UNIT placed indoors. The main unit is powered up by the 12V AC adapter. To install it, 1. Position the main unit and other units within effective range (109 yards). 2. Insert four UM3 or “AA”-sized alkaline batteries for backup purpose. 3. Mount the main unit safely in place. Or use its table stand to A. WEATHER FORECAST AND BAROMETRIC READING place it on a flat surface. WIN

Resumen del contenido incluido en la página 4

5. Press [SET] for minutes setting. BACKLIGHT 6. Use [ ] and ] to change to the desired setting. The main unit, when connected to the AC power, is equipped with 7. Press [SET] to confirm. an automatic backlight. Every time you press a window on the main Note: the window will show “ ” if no alarm is armed. unit, the backlight will come on for a few seconds. This function will be disabled for sole battery operation. The Once set, the alarm clock will be activated automatically and the alarm in

Resumen del contenido incluido en la página 5

To select the display unit, The temperatures can be displayed in degree Centigrade (°C) or Fahrenheit (°F). 1. Press the indoor temperature window. To select the display unit, 2. Press [UNIT] repeatedly for the desired setting. The selected unit will apply to all temperature displays in this window. 1. Press the outdoor/channel temperature window. Note: The unit of all temperature related display will be changed 2. Press [UNIT] repeatedly for the desired setting. The selected unit simultaneously

Resumen del contenido incluido en la página 6

To clear the record, AUTO SCANNING FUNCTION 1. Press the wind speed and direction window. The auto scanning function is avalibable for the outdoor/channel 2. Press and hold [MEMORY]. window for both the temperature and humidity. As for the wind direction, it is displayed in a digital compass with To use it, bearing readouts. 1. Press the outdoor/channel temperature or humidity window. 2. Press and hold [ ] . The main unit will start scanning from the WEATHER ALARMS active temperature and humidi

Resumen del contenido incluido en la página 7

( -4°F to 140°F ) DISCONNECTED SIGNALS Resolution : 0.1°C (0.2°F) (indoor and outdoor) If without obvious reason the display for the main unit goes blank or “ ” are displayed, press and hold [CHANNEL] to enforce an immediate search. Relative Humidity Measuring Range : 2 to 98% RH If that fails, check: (indoor and outdoor) - All weather instruments are still in place. Resolution : 1% RH - The batteries of the main unit and individual weather instruments (indoor and outdoo

Resumen del contenido incluido en la página 8

R&TTE Compliance Note THGR968 : Weight : 111.5 g This device complies with the essential requirements of Article 3 Dimension : 113.5 (L) x 42.5 (W) x 107.5 (H) of the R&TTE 1999/5/EC Directive, if used for its intended use and Power : Main : solar cell (STR918) that the following standard(s) has been applied: RGR968 : Electromagnetic compatibility (Article 3.1.b of the R&TTE Direc- tive) Weight : 276 g Dimension : Ø 113.5 x 145 (H) Applied standards ETS 300 683 : 1997 Power : Main : sole cell (

Resumen del contenido incluido en la página 9

CUSTOMER ASSISTANCE Should you have questions about this project or require additional assistance, please contact our 24-7-365 customer service department at 800-853-8883 or via email at helpme@oscientific.com. Product Name : CABLE FREE WEATHER STATION Model Number : WMR968 Responsible Party : Oregon Scientific, Inc.19861 SW 95th Place Tualatin, Oregon 97062 USA Tel : 503-639-8883 9 928N-USE.p65 9 08/10/2001, 12:20 PM GB