Resumen del contenido incluido en la página 1
Temperature & Humidity
Sensor with Probe
USER MANUAL
(TS33F-M)
MADE IN CHINA
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 BEFORE YOU BEGIN 5 BATTERY INSTALLATION 6 LOW BATTERY WARNING 6 PLACEMENT OF THE REMOTE SENSOR 6 GETTING STARTED 6 TRANSMISSION COLLISION 7 PRECAUTIONS 7 SPECIFICATIONS 8 FCC STATEMENT 8 DECLARATION OF CONFORMITY 9 BATTERY SAFETY INSTRUCTIONS 10 STANDARD WARRANTY INFORMATION 11 2 MADE IN CHINA
Resumen del contenido incluido en la página 3
INTRODUCTION Thank you for selecting a Meade Instruments temperature and humidity sensor with probe! Meade Instruments is the world’s leading designer and manufacturer of telescopes for professional and amateur astronomers – famous for its innovative, high performance telescopes at affordable prices. Meade Instruments now brings that same passion innovation and high performance to its own line of precision, feature rich weather stations. In this package you will find: • One remote sensor
Resumen del contenido incluido en la página 4
PRODUCT OVERVIEW FEATURES • Remote temperature transmission to the main unit via 433 MHz signal • Temperature and Humidity LCD display • Case can be wall mounted using built-in hanger • 100 feet (30 meters) transmission range without interference • Selection of the temperature display in Celsius or Fahrenheit • 3 available channels for temperature and humidity transmission • Reset for all previous readings • Low Battery Indication E MADE IN CHINA A F G C D B TM THERMO – HYGRO SENSOR A LED INDI
Resumen del contenido incluido en la página 5
G EXTERNAL REMOVABLE TEMPERATURE PROBE • Measures the temperature in the pools, hot tubs and etc. TS33F-M SENSOR IS COMPATIBLE WITH ALL MEADE INSTRUMENTS WIRELESS WEATHER STATIONS BEFORE YOU BEGIN • The remote sensor can be placed indoors or outdoors. • We recommend using alkaline batteries for the remote sensor when temperatures are above 32°F (0°C). We recommend using AA lithium batteries when temperatures are below 32°F (0°C). • Avoid using rechargeable batteries. (Rechargeable batteries
Resumen del contenido incluido en la página 6
MADE IN CHINA BATTERY INSTALLATION NOTE: Install the batteries; select the channel and temperature in C° or F° before mounting the remote sensor. • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel (if channel switch is available in your model). The switch is located in the battery compartment. Channel 1 is typically selected if only one remote sensor is being used. • Install 2 “AA” size alkaline batteries (not included) matching the polariti
Resumen del contenido incluido en la página 7
MADE IN CHINA If there is no reception, please perform the following steps: • Bring the main unit and remote sensor close together. • Remove four (4) small screws from the back of the remote sensor with small Phillips screwdriver, and open the battery compartment. • Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal. • Remove the batteries from the main unit and reinstall them
Resumen del contenido incluido en la página 8
MADE IN CHINA SPECIFICATIONS Remote Temperature Proposed operating range with alkaline batteries: -4°F to 122°F(-20°C to 50°C) Proposed operating range with lithium batteries: -40°F to 122°F(-40°C to 50°C) Temperature resolution: 0.1°C/0.2°F LCD display of registered temperature and humidity Remote Humidity Proposed operating range: 25% to 95% Humidity Resolution: 1% Low battery indicator Removable temperature probe with 10 feet cable RF Transmission Frequency: 433 MHz Maximum number of transmi
Resumen del contenido incluido en la página 9
MADE IN CHINA There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to improve or correct turning the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet
Resumen del contenido incluido en la página 10
MADE IN CHINA BATTERY SAFETY INSTRUCTIONS • Always purchase the correct size (2 x 1.5V AA, 15A/15AC ANSI, LR6 IEC), (2 x ANSI/NEDA-5004LC, IEC-CR2032) and grade of battery most suitable for the intended use. • Replace all batteries of a set at the same time. • Clean the battery contacts and also those of the device prior to battery installation. • Ensure the batteries are installed correctly with regard to polarity (+ and -). • Remove the batteries from any weather station which is n
Resumen del contenido incluido en la página 11
MADE IN CHINA STANDARD WARRANTY INFORMATION This product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in the U.S.A. MIC will repair or replace the product, or part thereof, found upon inspection by MIC to be defective, provided the defective part or product is returned to MIC, freight prepaid, with proof of purchase. This warranty applies to the original purchaser only and is
Resumen del contenido incluido en la página 12
Meade Instruments Corp. 27 Hubble Irvine, CA 92618 U.S.A. © 2010 Meade Instruments Corporation. All Rights Reserved. All user manual contents and information are subject to change. MADE IN CHINA
