Manual de instrucciones de ATD Tools ATD-3687

Resumen del contenido incluido en la página 1

MANIFOLD OPERATING INSTRUCTIONS





ATD-3687
ECONOMY MANIFOLD GAUGE SET
WARNING: Always wear safety goggles when working with refrigerants.
Contact with refrigerant can cause eye injury.
Disconnect hoses with extreme caution! Pressurized refrigerant may be
present in hoses. Always point hoses away from you and anyone nearby.

Your manifold is designed so that all three lower fittings are connected to each other by
internal passages. Separate passages from the low and high side fi

Resumen del contenido incluido en la página 2

MANIFOLD OPERATING INSTRUCTIONS Recovering Refrigerant Note: According to federal law, refrigerant should not be exhausted to the atmosphere. 1. Be sure the blue low side hose is connected to the A/C system’s low side service port and that the red high side hose is connected to the A/C system’s high side service port. Note: Typically, the yellow center hose is connected to the inlet of the recovery unit. 2. Follow the instructions provided with the recovery unit for proper recovery of

Resumen del contenido incluido en la página 3

MANIFOLD OPERATING INSTRUCTIONS MAINTAINING YOUR MANIFOLD To keep your manifold in top operating condition: Periodically replace O-rings and valve seats. Be sure to lubricate O-rings with High Vacuum Grease. Because of ongoing product improvements, we reserve the right to change design, specifications, and materials without notice. SERVICE COUPLER OPERATION Field service couplers are provided to access the vehicle’s service ports. The service coupler should be in the closed positi

Resumen del contenido incluido en la página 4

MANIFOLD OPERATING INSTRUCTIONS

Resumen del contenido incluido en la página 5

MANIFOLD OPERATING INSTRUCTIONS