Resumen del contenido incluido en la página 1
E4H-CE AND E8-CE SERIES
WATER PURIFICATION
MACHINES
3 3
3 m /hr to 45 m /hr
18,000 gpd to 288,000 gpd
Control Narrative
Manual
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
GE OSMONICS E4H-CE AND E8-CE WATER TREATMENT SYSTEMS CONTROL NARRATIVE MANUAL TABLE OF CONTENTS Page 1.0 OVERVIEW 1 1.1 Hardware 1 1.2 Software 1 1.3 Operator Interface Terminal (OIT) 2 2.0 START-UP 3 2.1 Operation Screen 4 2.2 Alarm History Screen 6 2.3 Machine Status Screen 8 2.4 Utilities Screen 10 2.5 Set-Up Screen 11 LIST OF FIGURES Figure Title 2.1 Start-Up Screen 3 2.2 Operation Screen 4 2.3 Alarm History Screen 6 2.4 Machine Status Screen 8 2.5 Utilities Screen 10 2.6 Set-Up Screen 11 LI
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
1.0 OVERVIEW The GE Osmonics E4H-CE and E8-CE water treatment systems consist of modular equipment that is designed to work together with the reverse osmosis (RO) machine at the heart of the system. The Programmable Logic Controller (PLC) and Operator Interface Terminal (OIT) are pro- grammed to control a complete, integrated system. A water purification system may consist of the following modular equipment: · Media Filter(s) · Chemical Injection System · Clean-In-Place (CIP) System · Permeate
Resumen del contenido incluido en la página 6
1.3 Operator Interface Terminal (OIT) Screen The available screens for the PanelView are as listed: START-UP: Contact information for customer. OPERATION: Gives run options for machine, alarm, and status messages. ALARM HISTORY: Displays last five alarms conditions. STATUS: Displays last five operating conditions. UTILITIES: Adjusts contrast, screen center, and allows user to clean dis- play. SET-UP: Allows user to clear alarm history, run time, and status. Allows user to download new program in
Resumen del contenido incluido en la página 7
2.0 START-UP The START-UP Screen is displayed upon start-up of the E-CE Series RO machine. This touch screen gives customer contact information. Figure 2.1 Start-Up Screen To get to the next screen, press anywhere on the screen or wait twenty (20) seconds. 3
Resumen del contenido incluido en la página 8
2.1 Operation Screen The Operation Screen displays the control function for the E-CE Series RO machine. 3 4 11 1 5 2 6 12 10 7 89 Figure 2.2 Operation Screen NO. FUNCTION OPERATION NO. FUNCTION OPERATION 1 RO Switches machine to run 7 INFORMATION Takes User to Information Screen 2 AUTO/HAND Switches machine to Auto 8 ALARM Takes User to Alarm Screen or Hand 3 CIP Switches machine to CIP mode 9 ALARM RESET Resets current Alarm 4 FILL Energizes the inlet solenoid valve 10 UTILITIES Takes User to U
Resumen del contenido incluido en la página 9
The RO machine is controlled using the Operation Screen. The FILL button energizes the inlet solenoid valve allowing the RO machine to fill water. The machine will run for ten (10) minutes filling the machine. This needs to be done before the RO machine can oper- ate. Once the machine has been filled the RO, CIP, and PURGE buttons will operate. The RO button controls the RO machine when it is in Run Mode. If the RO machine is not in Run Mode, the RO button switches the RO machine from its c
Resumen del contenido incluido en la página 10
2.2 Alarm History Screen The ALARM Message, located above the Control Buttons, shows the user current Alarm Conditions. 5 4 1 3 2 Figure 2.3 Alarm History Screen NUMBER FUNCTION OPERATION 1 BACK Takes user back to OPERATION Screen 2 ALARM Takes user to ALARM Screen 3 ALARM RESET Resets current ALARM conditions 4 UTILITIES Takes users to UTILITIES Screen 5 ALARM HISTORY Displays the last 5 Alarm Conditions 6
Resumen del contenido incluido en la página 11
Table 2.1 Alarm Messages ALARM ACTION NOTES DISPLAY FACTORY SET DISPLAYED (seconds) POINTS* LOW INLET Shuts down RO Press ALARM 12 Adjustable switch PRESSURE machine RESET on OIT [set at 0.8 bar (12 psi)] HI PERMEATE Shuts down RO Press ALARM 0 Adjustable switch PRESSURE machine RESET on OIT [set at 5.5 bar (80 psi)] HI TEMP Shuts down RO Press ALARM 0 Non-adjustable machine RESET on OIT switch [set at 38°C (100°F)] HIGH Alarm light dis- RO machine will None Adjustable switch pH played on pH op
Resumen del contenido incluido en la página 12
2.3 Machine Status Screen The Machine Status Screen displays the last five run conditions. 1 4 23 Figure 2.4 Machine Status Screen NUMBER FUNCTION OPERATION 1 BACK Takes user back to OPERATION Screen 2 ALARM Takes user to ALARM Screen 3 ALARM RESET Resets current ALARM Conditions 4 UTILITIES Takes users to UTILITIES Screen 8
Resumen del contenido incluido en la página 13
Table 2.2 Status Screen System Message SYSTEM MESSAGE DEFINITION RO MODE Normal Operating Mode. CIP MODE Clean-In-Place Mode used for cleaning. PERMEATE PURGE MODE Permeate is “recycled” back through RO machine. MANUAL SHUTDOWN RO machine switched OFF by manually pressing ON/OFF button ALARM SHUTDOWN RO machine has shutdown due to one of the Alarms described in Table 2.1. PRETREATMENT SERVICE RO machine has shutdown due to a signal from pretreatment. POST-TREATMENT SERVICE RO machine has shutdow
Resumen del contenido incluido en la página 14
2.4 Utilities Screen The Utilities Screen allows the user to adjust contrast, screen center, and clean the display. 3 1 2 4 5 8 8 7 Figure 2.5 Utilities Screen NO. FUNCTION OPERATION NO. FUNCTION OPERATION 1 CONTRAST + Darkens OIT Screen 5 BACK Takes users back to previous screen 6 INFORMATION Takes users to Utilities 2 CONTRAST - Lightens OIT Screen Screen 7 ALARM Takes users to Alarm Screen 3 CALIBRATE Allows users to adjust SCREEN position of OIT Screen 8 SET-UP Takes users to Set-Up 4 CLEA
Resumen del contenido incluido en la página 15
2.5 Set-Up Screen The Set-Up Screen allows the users to clear Alarm History, run time, and status. This Screen allows users to download new program information. 1 2 3 4 5 8 6 7 Figure 2.6 Screen Set-Up NO. FUNCTION OPERATION NO. FUNCTION OPERATION 1* ALARM Clears history of Alarm 5 BACK Takes users back to previous screen HISTORY conditions 6 INFORMATION Takes users to Information 2* STATUS Clears history of system Screen HISTORY conditions 7 UTILITIES Takes users to Utilities 3* RUN TIME Al
Resumen del contenido incluido en la página 16
Resumen del contenido incluido en la página 17
Call (952) 933-2277 for additional information, (800) 766-2599 in the U.S., or visit w w w.osmonics.com Manufactured in the USA Corporate Headquarters Euro/Africa Operations Asia/Pacific Operations 5951 Clearwater Drive 230 rue Robert Schuman 1044/8 SOI 44/2 Minnetonka, MN ZA des Uselles Sukhumvit Road Prakanong 55343-8995 F-77350 Le MØe sur Seine Bangkok 10110 USA FRANCE THAILAND (952) 933-2277 Phone +33 1 64 10 2000 Phone +66 2 38 14213 Phone (952) 933-0141 Fax +33 1 64 10 3747 Fax +66 2 39 18
