Resumen del contenido incluido en la página 1
FM/AM
Compact Disc
Player
EN
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. CDX-C760 Serial No.
For installation and connections, see the supplied installation/connections
manual.
CDX-C760
1997 by Sony Corporation
Resumen del contenido incluido en la página 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing the Sony Compact comply with the limits for a Class B digital Disc Player. This unit lets you enjoy a variety device, pursuant to Part 15 of the FCC Rules. of features by using either a supplied rotary These limits are designed to provide remote or an optional wireless remote. reasonable protection against harmful interference in a residential installation. This In addition to the CD playback and radio equipme
Resumen del contenido incluido en la página 3
Table of Contents This Unit Only With Optional Equipment Getting Started CD/MD Changer Resetting the unit ................................................ 4 Playing a CD or MD ......................................... 15 Detaching the front panel .................................. 4 Scanning the tracks Preparing the rotary remote .............................. 4 — Intro Scan ................................................. 16 Setting the clock ..................................................
Resumen del contenido incluido en la página 4
LIST MODE SOUND Attaching the front panel Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset A the unit. Press the reset button with a pointed object, B such as a ball-point pen. Notes • Be sure not to attach the front panel upside down. • Do not press the front panel hard against the unit when attaching it. Press it light
Resumen del contenido incluido en la página 5
Getting Started/CD Player Setting the clock CD Player The clock uses a 12-hour digital indication. Example: Set the clock to 10:08 1 Press (SHIFT), then press (2) (SET UP). Listening to a CD Set SUR EQ
Clock SET UP Simply insert the CD. Playback starts automatically. Labelled side up 1 Press (4) (n). Set SUR EQ
1:ââ SET UP The hour digit flashes. 2 Set the hour. to go backward SOURCE If a CD is already inserted, press (SOURCE) to go forward repeatedly until “CD” appears. Elapsed playi
Resumen del contenido incluido en la página 6
Note Automatically scrolling a disc name If “ ” or “ ” appears in the display, that — Auto Scroll means you have reached the beginning or the end of the disc and you cannot go any further. If the disc name/artist name or track name on a CD-TEXT disc exceeds 10 characters and the Auto Scroll function is on, automatically scrolls on the display as follows: • The disc name appears when the disc has changed (if the disc name is selected). Playing a CD in various • The track name appears when the tra
Resumen del contenido incluido en la página 7
CD Player Playing tracks repeatedly — Repeat Play Creating a program — CD Program Memory 1 During playback, press (SHIFT). You can play the tracks in the order you want 2 Press (6) (REP) repeatedly until by making your own program. You can make ”Repeat 1“ appears. two programs: Program 1 and Program 2. You can select up to 12 tracks for each program. SET UP PLAY MODE REP SHUF You can store the programs in memory. SHIFT 1 234567 1 Press (SHIFT), then press (3) (PLAY MODE) for two seconds. Repeat
Resumen del contenido incluido en la página 8
To delete Program 2, press (4) (n) Playing the stored program repeatedly until “PGM 2” appears. You can select: • PGM 1 to play Program 1. • PGM 2 to play Program 2. 3 Press (5) (ENTER) for two seconds. • PGM 1+2 to play Programs 1 and 2. P1 SUR EQ
NO Data PLAY MODE ENTER 1 Press (SHIFT). The entire program is erased. 2 Press (3) (PLAY MODE) repeatedly until “PGM” appears. 4 When you finish erasing programs, press (3) (PLAY MODE) for two seconds. 3 Press (4) (n) repeatedly until the desired
Resumen del contenido incluido en la página 9
CD Player/Radio Erasing tracks in a program 1 Press (SHIFT), then press (3) (PLAY Radio MODE) for two seconds. TRACK CD SUR EQ
7 P1.â8 PLAY MODE ENTER “P 1” shows Program 1 is selected. Memorizing stations To select Program 2, press (4) (n) automatically repeatedly until “P 2” appears. — Best Tuning Memory (BTM) 2 Press (1) (N) or (4) (n) to select the The unit selects the stations with the strongest track you want to erase. signals and memorizes them in the order of Track slot number their
Resumen del contenido incluido en la página 10
Memorializing only the Receiving the memorized desired stations stations You can store up to 10 stations on each band 1 Press (SOURCE) repeatedly to select the (20 for FM1 and FM2, 10 for AM) in the order tuner. of your choice. 2 Press (MODE) repeatedly to select the 1 Press (SOURCE) repeatedly to select the band (FM1, FM2 or AM). tuner. 3 Press the number button ((1) to (10)) 2 Press (MODE) repeatedly to select the momentarily where the desired station is band (FM1, FM2 or AM). stored. 3 Press
Resumen del contenido incluido en la página 11
Radio Displaying the station name Storing the station names Press (DSPL) during radio reception. —Station Memo FM1 SUR EQ
3 WRKISS You can assign a name to each radio station and store it in memory. The name of the current station appears in the display. You can Each time you press (DSPL), the item store up to eight characters for each station. changes as follows: z Station name* z Frequency z Clock Storing the station names * If the station name is not stored, “NO Name” 1 Tune in a stati
Resumen del contenido incluido en la página 12
By rotating the control (the SEEK/ AMS control) Other Functions Using the rotary remote The rotary remote works by pressing buttons and/or rotating controls. You can control an optional CD or MD Rotate the control momentarily and changer with the rotary remote. release it to: •Locate a specific track on a disc. Rotate By pressing buttons (the SOURCE and hold the control until you locate the and MODE buttons) specific point in a track, then release it to start playback. •Tune in stations automati
Resumen del contenido incluido en la página 13
Other Functions Changing the operative direction The operative direction of controls is factory- Adjusting the sound set as in the illustration below. characteristics To increase You can adjust the bass, treble, balance and fader. Each source can store the bass and treble levels respectively. 1 Select the item you want to adjust by To decrease pressing (SOUND) repeatedly. If you need to mount the rotary remote on the VOL (volume) n BAS (bass) n TRE right side of the steering column, you can (tre
Resumen del contenido incluido en la página 14
4 Press (SHIFT). After the mode setting is complete, the Changing the sound and display goes back to normal playback display settings mode. You can set: • Clock (page 5). • D.Info (Dual Information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF). • Amber/Green to change the illumination color to amber or green. • Dimmer to change the brightness of the display. — Select “Auto” to dim the display only when you turn the lights on. — Sele
Resumen del contenido incluido en la página 15
Other Functions/CD/MD Changer Automatically scrolling a disc name With Optional Equipment — Auto Scroll If the disc name/artist name or track name on CD/MD Changer a CD-TEXT disc or MD exceeds 10 characters and the Auto Scroll function is on, You can control up to 7 CD and MD changers automatically scrolls on the display as follows: with this unit. • The disc name appears when the disc has changed (if the disc name is selected). If you connect an optional CD changer with • The track name appears
Resumen del contenido incluido en la página 16
Locating a specific point in a track — Manual Search Playing tracks repeatedly — Repeat Play During playback, press and hold either side of (SEEK/AMS). Release the button You can select: when you have found the desired point. •Repeat 1 to repeat a track. •Repeat 2 to repeat a disc. To search forward •Repeat 3 to repeat all the discs in the current changer. To search backward 1 During playback, press (SHIFT). Locating a disc by disc number — Direct Disc Selection 2 Press (6) (REP) repeatedly unti
Resumen del contenido incluido en la página 17
CD/MD Changer Notes • “*Wait*” appears in the display while the unit is reading Creating a program the data, or when a disc has not been put into the unit. • “*Mem Full*” appears in the display when you try to — Program Memory (CD/MD changer with enter more than 12 tracks into a program. the program memory function) Playing the stored program You can play tracks in the order you want by making your own program. You can make two Changing the disc order in the changer will not programs: Program 1
Resumen del contenido incluido en la página 18
Erasing an entire program 4 Press (5) (ENTER) momentarily to enter the track. 1 Press (SHIFT), then press (3) (PLAY The current track in that slot number and MODE) for two seconds. the succeeding tracks shift down. DISC TRACK To continue inserting tracks, repeat steps 2 CD2 SUR EQ
4 7 P1.â8 through 4. PLAY MODE ENTER “P 1” shows Program 1 is selected. Note Once all 12 slots have been filled, “*Mem Full*” If you have labelled the disc, the bank edit appears in the display, and you cannot inse
Resumen del contenido incluido en la página 19
CD/MD Changer Displaying the disc memo name or CD-TEXT name Labeling a CD — Disc Memo When you play back a CD-TEXT disc, you can (CD changer with the custom file function) set the priority display item to be the disc You can label each disc with a personalized memo name or the CD-TEXT name. name. You can enter up to eight characters for a disc. If you label a CD, you can locate the 1 Press (SHIFT) during CD-TEXT disc disc by name (page 20) and select the specific playback. tracks for playback (p
Resumen del contenido incluido en la página 20
The display item will change depending on the setting as follows: Locating a disc by name Type of Priority display — List-up (CD changer with the custom file Actual display disc setting function or MD changer) Disc MEMO Disc memo A You can use this function for discs that have TEXT name CD-TEXT information been assigned a custom name. For more Disc MEMO B Disc memo information on disc names, refer to “Labeling a TEXT name CD” (page 19). Disc MEMO C CD-TEXT information TEXT name 1 Press (LIST) mo
