Resumen del contenido incluido en la página 1
ENGLISH FRANÇAIS ESPAÑOL
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED (LSN/LSU-HSV2/HV2)
http://www.lghvac.com
P/NO : MFL42262811 www.lg.com
Resumen del contenido incluido en la página 2
Air Conditioner Owner’s Manual TABLE OF CONTENTS A. Safety Precautions ..............................3 FOR YOUR RECORDS B. Electrical Safety...................................6 Write the model and serial numbers here: Temporary Use of an Adapter ...............6 Model # Temporary Use of an Extension Cord ...6 Serial # Symbols used in this Manual.................6 You can find them on a label on the side of each unit. C. Product Introduction...........................7 Dealer's Name Indoor Units
Resumen del contenido incluido en la página 3
ENGLISH Safety Precautions Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage. ■ Meanings of symbols used in this manual are as shown below. Be sure not to do.
Resumen del contenido incluido en la página 4
Safety Precautions Indoor/outdoor wiring connections must Safely dispose off the packing materials. Make sure to check that the power cable be secured tightly and the cable should Like screws, nails, batteries, broken plug is not dirty, loose or broken and be routed properly so that there is no things etc after installation or svc and then only insert the plug completely. force pulling the cable from the then tear away and throw away the connection terminals. plastic packaging bags. � Improper
Resumen del contenido incluido en la página 5
ENGLISH Safety Precautions Do not use the product for special purposes, Do not block the inlet or outlet of air flow. Use a soft cloth to clean. Do not use such as preserving foods, works of art, etc. It harsh detergents, solvents or splashing is a consumer air conditioner, not a precision water etc . refrigeration system. � There is risk of damage or loss of property. � It may cause product failure. � There is risk of fire, electric shock, or damage to the plastic parts of the product. Do not
Resumen del contenido incluido en la página 6
Electrical Safety Electrical Safety � This appliance must be properly grounded. To minimize the risk of electric shock, you must always plug into a grounded oulet. � Do not cut or remove the grounding prong from the power plug. � Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring. � If you have any doubt whether the air conditioner
Resumen del contenido incluido en la página 7
ENGLISH Product Introduction Product Introduction Here is a brief introduction of the indoor and outdoor units. Indoor Units Air inlet Plasma filter Air filter ON/OFF button Front grille Triple filter Operation lamp Signal Receiver Hor Hor Horiz iz izontal v ontal v ontal vane ane ane Air outlet Vertical louver Allergy free filter Operation Indication Lamps � Cooling : 'Cooling' lamp lights up during Cooling Operation � Heating : 'Heating' lamp lights up during Heating Operation � Plasma : 'Pl
Resumen del contenido incluido en la página 8
Operating Instructions Operating Instructions How to insert the Batteries 1. Remove the battery cover by pulling it according to the arrow direction. 2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. 3. Reattach the cover by sliding it back into position. NOTE 1. Always use/replace both batteries of same type. 2. If the system is not to be used for a long time, remove the batteries to save their working life. 3. If the display screen of remote controlle
Resumen del contenido incluido en la página 9
ENGLISH Operating Instructions Wireless Remote Controller The controls will look like the following. ON/OFF BUTTON Used to turn off/on the unit. Signal transmitter OPERATION MODE SELECTION BUTTON Used to select the operation mode. ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. INDOOR FAN SPEED SELECTION BUTTON Used to select fan speed in six steps low, medium-low, medium, medium-high, high and natural wind. HORIZONTAL VANE CONTROL BUTTON Used to set the desired vertical ai
Resumen del contenido incluido en la página 10
Operating Instructions The controls will look like the following. Signal transmitter - Optional1 SLEEP MODE AUTO BUTTON Used to set sleep mode auto operation. - Optional2 JET COOL BUTTON Used to start or stop the speed cooling. The Jet Cool operates fan in super high speed in cooling mode. - Optional3 ENERGY SAVING COOLING BUTTON Used to save Energy (Optional1) (Optional2) (Optional3) Operation Mode Cooling Operation Auto Operation or Auto Changeover Healthy Dehumidification Operation Heatin
Resumen del contenido incluido en la página 11
ENGLISH Operating Instructions Operation Mode ON/OFF Press the ON/OFF BUTTON to turn the unit on. 1 The unit will respond with a beep. Open the cover of the remote controller and press the operation mode button. Each time MODE 2 the button is pressed, the operation mode is shifted in the direction of the arrow. Auto Healthy Heating Cooling Air Circulation Changeover Dehumidification (Heat pump model only) Auto Operation (Optional) Auto Changeover (Optional) TEMP For cooling or heating operation
Resumen del contenido incluido en la página 12
Operating Instructions Auto Changeover Operation (Optional) This operation is basically heating or cooling function of the air MODE conditioner. But during this operation the controller changes the operation mode automatically to keep the temperature within ±2°C with respect to the setting temperature. Auto Operation(Optional) TEMP The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you feel hot or cold,
Resumen del contenido incluido en la página 13
ENGLISH Operating Instructions Air Circulation Operation This operation circulates the air without cooling or heating. It can be MODE activated by pressing the OPERATION MODE SELECTION BUTTON. Once the air circulation is activated you can select the fan speed by pressing the INDOOR FAN SPEED SELECTION BUTTON. NOTE : During this opertion , 'Cooling' lamp lights up. Auto Clean Operation ❏ During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy dehumidificatio
Resumen del contenido incluido en la página 14
Operating Instructions Energy-Saving Cooling Mode (Optional) Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by setting body-adaptation time according to the change of time and temperature and adjusting desired temperature automatically. 1. Press the ON/OFF BUTTON to start the unit. 2. Open the cover of the remote controller. Select cooling operation. 3. Press the ENERGY-SAVING COOLING MODE BUTTON. 4. To cancel the energy-saving cooling mode, p
Resumen del contenido incluido en la página 15
ENGLISH Operating Instructions Timer Setting Button on the Description Indication on the LCD Display Remote Controller Press the Timer button once to set on the 1 Reserved 'On' (Press the Timer button twice to set the Reserved 'Off') Press the Time Setting buttons until the 2 desired time is set. - The order of a.m. and p.m. -> hour ->minute is repeated whenever you press the < > button. - By pressing the button, you can set the desired time. Press the SET/CLEAR BUTTON 3 (Press the S
Resumen del contenido incluido en la página 16
Operating Instructions Horizontal Vane Control The Horizontal Vane can be adjusted by using the remote controller. 1. Press the ON/OFF BUTTON to start the unit. 2. Press the vertical airflow direction button. Each time the button is pressed, the air-flow direction is changed in the direction of the arrow. STOP 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step Auto Swing ※ Press the Vertical Airflow Direction button once more during Auto Swing at the direction of airflow you want. Vertical Louver Con
Resumen del contenido incluido en la página 17
ENGLISH Operating Instructions Jet Cool/Heat Operation Jet cool function can be used to cool the room quickly in hot summer. When this function is turned on, the air conditioner runs in cooling operation mode with super high fan speed and 18°C(64°F) setting temperature for 30 minutes for fast and effective cooling. Similarly, jet heat function (available only in some models) warms up the room quickly by operating at super high fan speed and 30°C(86°F) setting temperature for 30 minutes. You can
Resumen del contenido incluido en la página 18
Operating Instructions Forced operation Forced operation is used when the remote controller can't be used. The operation will be started if the ON/OFF button is pressed. If you want to stop the operation, re-press the button. ON/OFF button Heat pump Model Cooling Model Room Temp. ≥ 24°C(75.2°F) 21°C(69.8°F) ≤ Room Temp. < 24°C(75.2°F) Room Temp. < 21°C(69.8°F) Operating mode Cooling Cooling Healthy Dehumidification Heating Indoor FAN Speed High High High High Setting Temperature 22°C(71.6°F) 22°
Resumen del contenido incluido en la página 19
ENGLISH Maintenance and Service Maintenance and Service Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and unplug the power cord. Indoor Unit Clean the unit with a soft dry cloth. Do not use bleach or abrasives. Never use any of these � Water hotter than 40°C(104°F). It may cause deformation and discoloration. � Volatile substances. They may damage the surface of the air conditioner. Air Filters The air filters behind the front panel /
Resumen del contenido incluido en la página 20
Maintenance and Service Outdoor Unit The heat exchanger coils and panel vents of the outdoor unit should be checked regularly. If clogged with dirt or soot, the heat exchanger and panel vents may be professionally steam cleaned. NOTE Dirty or clogged coils will reduce the operating efficiency of the system and cause higher operating costs. Operation Tips! Do not overcool the room. Keep blinds or curtains Keep the room temperature closed. uniform. This is not good for the health and Do not let
