Resumen del contenido incluido en la página 1
3-258-853-13 (1)
IC Recorder
Operating Instructions
Owner’s Record
The model number and the serial number are located
on the back of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ICD-BM1/BM1PRO Serial No.
ICD-BM1/BM1PRO
©2003 Sony Corporation
Resumen del contenido incluido en la página 2
For the customers in the United States For the customers in the United States INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfu
Resumen del contenido incluido en la página 3
Notice for users Program © 1999, 2000, 2001, 2002, 2003 Sony Corporation Documentation ©2003 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNEC
Resumen del contenido incluido en la página 4
Table of Contents Getting Started Step 1: Installing the Batteries .............................................................. 6 Replacing the Batteries .................................................................. 7 Step 2: Setting the Clock ...................................................................... 8 Step 3: Inserting a “Memory Stick” into the IC Recorder ............. 10 Basic Operations Recording Messages .................................................................
Resumen del contenido incluido en la página 5
Other Functions Adjusting the Playback Speed — DPC (Digital Pitch Control) .................................................................. 39 Setting the Overwrite Mode .............................................................. 41 Playing Back a Message at a Desired Time with an Alarm ........... 43 Formatting a “Memory Stick“ ........................................................... 47 Changing the Settings — MENU ...................................................... 49 Using the ”Dig
Resumen del contenido incluido en la página 6
BGetting Started Step 1: Installing the Batteries 1 Press down the battery compartment lid. Then slide it while pressing down and lift it. Press down around here. 2 Insert two LR03 (size AAA) alkaline batteries with correct polarity, and close the lid. Clock setting display appears when you insert batteries for the first time or after the unit has been without batteries for a certain period of time. Please refer to steps 3 to 6 in “Step 2: Setting the Clock” on pages 8 and 9 to set the date and
Resumen del contenido incluido en la página 7
Getting Started Replacing the Batteries The battery indicator on the display window shows the battery condition. Notes • Do not use manganese batteries for this unit. • When you replace the batteries, insert the new ones within 3 minutes after you remove the exhausted ones. Otherwise, the display may show the clock setting or incorrect date and time when you re-insert the batteries. In this case, set the date and time again. The recorded messages and alarm setting, however, will remain. • Do not
Resumen del contenido incluido en la página 8
Step 2: Setting the Clock You need to set the clock to use the alarm function or record the date and time. Clock setting display appears when you insert battery for the first time, or when you insert battery after the unit has been without battery for a certain period of time. In this case, proceed from step 4. Jog lever Press up (>). MENU POWER ENTER CANCEL Press down (.). 1 Slide POWER to ON. The IC recorder is turned on. 2 Press MENU. The menu mode will be displayed in the display window. 3
Resumen del contenido incluido en la página 9
Getting Started 4 Press ENTER. The date and time setting window is displayed. The year digits will flash. 5 Set the date and time. 1 Press the jog lever up or down (>/ .) to select the digits of the year. 2 Press ENTER. The month digit will flash. 3 Set the month, day, and the time in sequence, then press ENTER. The menu mode will be displayed again. 6 Press MENU. The window will return to the normal display. To cancel the operation Press CANCEL to return to the previous step of the operations.
Resumen del contenido incluido en la página 10
Step 3: Inserting a “Memory Stick” into the IC Recorder Notes • Make sure to insert or remove the “Memory Stick” while the unit is turned off. • Never remove the “Memory Stick” while the unit is accessing the “Memory Stick”. (The OPR indicator flashes in orange.) 1 Slide and open the “Memory Stick” slot cover. 2 Insert a “Memory Stick” into the “Memory Stick” slot with the terminal side facing inside the recorder. Insert it firmly until it clicks into place. Note Do not insert a “Memory Stick”
Resumen del contenido incluido en la página 11
Getting Started Note on the “ACCESS” message The unit is accessing data while “MEMORY STICK ACCESS“ appears in the display window or the OPR indicator flashes in orange. While accessing, do not remove the “Memory Stick”, batteries, or the AC adaptor (not supplied). Doing so may damage the data. Notes • The unit starts accessing the data after it is turned on. • If the unit is required to process excessive amount of data, “MEMORY STICK ACCESS“ may be displayed for an extended period of time. This
Resumen del contenido incluido en la página 12
BBasic Operations Recording Messages You can record messages in each (initially named FOLDER01, FOLDER02, and FOLDER03) folder. The maximum number of recordable messages differs depending on the “Memory Stick” capacity. You can record messages using the following three functions: • Add a recording to a previously recorded message (next page) • Add a recording as a new message (page 15) • Add an overwrite recording (page 15) This section explains how to add a recording to a previously recorded me
Resumen del contenido incluido en la página 13
Resumen del contenido incluido en la página 14
Resumen del contenido incluido en la página 15
Basic Operations Recording as a New Message You can add a recording as a new message after the last message in the folder. Message 1 Message 2 Message 3 Blank space Starts recording at any point by pressing NEW FILE. Message 1 Message 2 Message 3 Message 4 Recorded after the last message as a new message Before you start recording in step 3 on the previous page, press NEW FILE. “NEW FILE” will be displayed. Then slide the control key to REC to start a new recording as the last message in the fol
Resumen del contenido incluido en la página 16
Recording Messages (continued) Using Convenient Functions while Recording Reviewing the recording Slide the control key to B.SPACE. You can search backwards while listening to fast playback sound. After you slide the control key to PLAY, playback starts from that point. You can add an overwrite recording from that point. Monitoring the recording When recording, you can connect an ear receiver supplied or not supplied to the i (headphones) jack and monitor the recording from the connected ear r
Resumen del contenido incluido en la página 17
Resumen del contenido incluido en la página 18
Recording with an External Microphone or Other Equipment You can record sound of an external microphone or other equipment (tape recorder, MiniDisc player, or etc.) with the IC recorder. Depending on the device you use, connect the IC recorder as follows. For available accessories, consult with your nearest Sony dealer. Recording with an External Stereo Microphone Connect an external stereo microphone to the MIC (microphone) jack. You can enjoy the stereo recording by using a stereo microphon
Resumen del contenido incluido en la página 19
Resumen del contenido incluido en la página 20